Manufacturers
ETASIS EFRP-300
Description
Etasis EFRP-300 Power Supply. 300W | Power Factor Correction (PFC) | N+1 Redundant Configuration | Meet 1U Mount Rack System
Part Number
EFRP-300
Price
Request Quote
Manufacturer
ETASIS
Lead Time
Request Quote
Category
Power Supply
Specifications
+12V1 VDC
Max Load Current: 18A Min Load Current: 1A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 120mV
+3.3 VDC
Max Load Current: 30A Min Load Current: 3A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 60mV
+5 VDC
Max Load Current: 25A Min Load Current: 1A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 60mV
+5 Vsb DC
Max Load Current: 2A Min Load Current: 0A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 70mV
-12 VDC
Max Load Current: 0.8A Min Load Current: 0A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 120mV
-5 VDC
Max Load Current: 0.3A Min Load Current: 0A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 120mV
Agency Requirements
Harmonic: Meet EN61000-3-2 standards EMI/RFI: CE, FCC class B and CISPR class B Safety: UL, cUL, CB, TUV, CCC
General Specifications (PS)
Input Range: 100 to 240 VAC, +/-10% Power Factor: 0.95 minimum Efficiency: 65% minimum, at full load Hold up Time: 20mS minimum, at full load PSON (Remote ON/OFF): TTL compatible signal Power Good: 100 to 500 ms, TTL compatible signal Cooling Fan: 40x40x28 mm (SANYO) Operating Temperature: 0 to 40 ºC (For EFRP-2300) Operating Humidity: 20 to 90 %
Input (PS)
Input Voltage: 100-240VAC Input Frequency: 47-63Hz Input Current: 6-3A
Notes (PS)
1. The +5 & +3.3 Volt combine total output shall not exceed 140W for EFRP-250 and 170W for EFRP-300 2. The +5, +3.3 and +12 Volt combine total output shall not exceed 230W for EFRP-250 and 280W for EFRP-300 3. Noise bandwidth is from DC to 20 MHz.
Features
- Active Power Factor Correction
- Compact size Module Design
- Current Sharing on +5V, +3.3V & +12V
- Front panel LED to Indicate Power Status
- MTBF >100,000 Hours
- Over Current Protection
- Over Power Protection
- Over Voltage Protection
- Power Fault Alarm Signals
- Quick Removable Application
- Remote DC Sense on +5V and +3.3V
- Short Circuit Protection
- Universal Power Input
Datasheet
Extracted Text
1U Type N+1 Redundant Power Supply ATX12V EFRP-250/300 250/300 watts Output Power Power Factor Correction (PFC) N+1 Redundant Configuration Meet 1U Rack Mount System Dimensions: 83(W) x 40(H) x 250(D) mm General Specifications: Features: Input Range: 100 to 240 VAC, +/-10% Compact size Module Design Power Factor: 0.95 minimum Universal Power Input Efficiency: 65% minimum, at full load Over Power Protection Hold up Time: 20mS minimum, at full load Over Voltage Protection PSON (Remote ON/OFF): TTL compatible signal Over Current Protection Power Good: 100 to 500 ms, TTL compatible signal Short Circuit Protection Cooling Fan: 40x40x28 mm (SANYO) Power Fault Alarm Signals Operating Temperature: 0 to 50 ºC (For EFRP-2250) Quick Removable Application 0 to 40 ºC (For EFRP-2300) Active Power Factor Correction Operating Humidity: 20 to 90 % Remote DC Sense on +5V and +3.3V Current Sharing on +5V, +3.3V & +12V Front panel LED to Indicate Power Status Agency Requirements: MTBF >100,000 Hours Harmonic: Meet EN61000-3-2 standards EMI/RFI: CE, FCC class B and CISPR class B Safety: UL, cUL, CB, TUV, CCC Electrical Specifications: Regulation, Ripple & Noise: Output +5V +3.3V +12V -5V -12V 5Vsb Load Regulation ± 5% ± 5% ± 5% ± 5% ± 5% ± 5% Cross Regulation ± 5% ± 5% ± 5% ± 5% ± 5% ± 5% Line Regulation ± 1% ± 1% ± 1% ± 1% ± 1% ± 1% Ripple & Noise 60mV 60mV 120mV 100mV 120mV 70mV Input and Output Ratings: Input Output Model No Voltage Frequency Current Watt Load +5V +3.3V +12V -5V -12V 5Vsb Max Load 25A 20A 16A 0.3A 0.8A 2A 100 - 240 EFRP-250 47-63 Hz 5-2.5A 250W VAC Min Load 3A 1A 1A 0A 0A 0A Max Load 30A 25A 18A 0.3A 0.8A 2A 100 - 240 EFRP-300 47-63 Hz 6-3A 300W VAC Min Load 3A 1A 1A 0A 0A 0A Note: 1. The +5 & +3.3 Volt combine total output shall not exceed 140W for EFRP-250 and 170W for EFRP-300. 2. The +5, +3.3 and +12 Volt combine total output shall not exceed 230W for EFRP-250 and 280W for EFRP-300. 3: Noise bandwidth is from DC to 20 MHz. 25 5VS+ 5VSHR 50 24 -5V -12V 49 23 +5V +5V 48 22 +5V +5V 47 21 +5V +5V 46 20 +5V +5V 45 19 GND GND 44 18 GND GND 43 17 GND GND 42 16 GND GND 41 15 GND GND 40 14 GND GND 39 13 GND GND 38 12 GND GND 37 11 +12V +12V 36 10 +12V +12V 35 9 +12V +12V 34 8 +3.3V +3.3V 33 7 +3.3V +3.3V 32 6 +3.3V +3.3V 31 5 +3.3V +3.3V 30 4 3VS+ 3VSHR 29 3 12VS+ 12VSHR 28 2 PFD PG 27 1 PSON 5VSB 26 Pin # Signal Signal Pin # Top Side Bottom Side 1U Type N+1 Redundant Power Supply EFRP-250/300 Dimensions (Unit: mm): Output Connector: Rev: 1.2 May. 29, 03
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the EFRP-300?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Etasis ARN1-6400F Power Supply. 400W
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods