ETASIS EFRP-2603
Specifications
Cooling Fan
38x38x28 mm
Efficiency
65% minimum, at full load
Hold up Time
17mS minimum
Input Current
12-6A Max
Input Frequency
47-63 Hz
Input Range
100 to 240 VAC
Input Voltage
100-240 VAC
Note
The +5 & +3.3 Volt combined total output shall not exceed 170W. The +12V1,+12V2,+12V3 combined output current shall not exceed 48A. The +5, +3.3 & +12 Volt total output should not exceed 580W. Maximum continues total DC output should not exceed 600W.
Operating Humidity
20 to 90%
Operating Temperature
0 to 45C
Output Load +12V1
Max Load 17A. Min Load 0.8A.
Output Load +12V2
Max Load 17A. Min Load 0.8A.
Output Load +12V3
Max Load 17A. Min Load 0.8A.
Output Load +3.3V
Max Load 24A. Min Load 1A
Output Load +5V
Max Load 30A. Min Load 1A
Output Load +5Vsb
Max Load 2A. Min Load 0.1A.
Output Load -12V
Max Load 0.8A. Min Load 0A.
Output Voltage +12V1
Regulation Load ± 5%, Regulation Cross ± 5%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +12V2
Regulation Load ± 5%, Regulation Cross ± 5%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +12V3
Regulation Load ± 5%, Regulation Cross ± 5%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +3.3V
Regulation Load ± 5%, Regulation Cross ± 5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage +5V
Regulation Load ± 5%, Regulation Cross ± 5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage +5VSB
Regulation Load ±5%, Regulation Cross ± 5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage -12V
Regulation Load ±9/-5%, Regulation Cross ± 5%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Watt
600W
Power Factor
0.95 minimum
Power Good
200 to 500 ms, TTL Signal
PSON (Remote ON/OFF)
TTL Signal
Features
- 3 Rails of 12V Output
- 600 watts Output Power
- Active Power Factor Correction
- Dimension: 101.8(W) x 83.4(H) x 300(D) mm
- Front panel LED to Indicate Power Status
- Hot Swappable Design
- I2C Functon (Option)
- Meet 2U Rackmount System
- MTBF >100,000 Hours
- Over Current Protection
- Over Power Protection
- Over Voltage Protection
- Power Fault Alarm Signals
- Quick Removable Application
- Remote DC Sense on +5V, +3.3V
- Short Circuit Protection
- Support to Dual Nocona Processors
- Universal Power Input
Datasheet
Extracted Text
Etasis Electronics Corporation . 2U Type N+1 Redundant Power Supply EFRP-2553/2603 Dimension: 101.8(W) x 83.4(H) x 300(D) mm : Input / Output: AC / DC Features 550+550/600+600 watts Output Power Hot Swappable Design Quick Removable Application Support to Dual Nocona Processors Active Power Factor Correction Universal Power Input 3 Rails of 12V Output Remote DC Sense on +5V, +3.3V Front panel LED to Indicate Power Status Meet 2U Rackmount System Power Fault Alarm Signals 2 I C Functon (Option) Over Voltage Protection Electrical Specifications Over Current Protection Over Power Protection Regulation, Ripple & Noise Short Circuit Protection Output +5V +3.3V +12V1 +12V2 +12V3 +12V -5V -12V 5Vsb MTBF >100,000 Hours Load Regulation ± 5% ± 5% ± 5% ± 5% ± 5% - - +9%/-5% ± 5% Cross Regulation ± 5% ± 5% ± 5% ± 5% ± 5% - - ± 5% ± 5% General Specifications Line Regulation ± 1% ± 1% ± 1% ± 1% ± 1% - - ± 1% ± 1% Input Range: 100 to 240 VAC Ripple & Noise 50mV 50mV 120mV 120mV 120mV - - 120mV 50mV Power Factor: 0.95 minimum Efficiency: 65% minimum, at full load Input / Output Ratings Hold up Time: 17mS minimum Model Input Output PSON (Remote ON/OFF): TTL Signal No. Power Good: 200 to 500 ms, TTL Signal Voltage Frequency Current Watt Load +5V +3.3V +12V1 +12V2 +12V3 +12V -5V -12V 5Vsb Cooling Fan: 38x38x28 mm EFRP- 100-240 47-63 Hz 10-5A 600W Max 20A 24A 15A 15A 15A - - 0.8A 2A Operating Temperature: 0 to 50ºC 2553 VAC Operating Humidity: 20 to 90% Min 1A 1A 0.8A 0.8A 0.8A - - 0A 0.1A EFRP- 100-240 47-63 Hz 10-5A 600W Max 20A 24A 17A 17A 17A - - 0.8A 2A Agency Requirements 2603 VAC Min 1A 1A 0.8A 0.8A 0.8A - - 0A 0.1A Harmonic: Meet EN61000-3-2 EMI/RFI: CE, FCC class B, BSMI Note: 1. The +5 & +3.3 Volt combined total output shall not exceed 140W. Safety: UL, cUL, TUV, CB, CCC 2. The +12V1,+12V2,+12V3 combined output current shall not edceed 42A for EFRP-2553. 3. The +12V1,+12V2,+12V3 combined output current shall not edceed 48A for EFRP-2603. 4: The +5, +3.3 & +12 Volt total output should not exceed 540W for EFRP-2553 and 580W for EFRP-2603 . Application 5. Maximum continues total DC output should not exceed 550W for EFRP-2553. 6. Maximum continues total DC output should not exceed 600W for EFRP-2603. Rackmount Server Industrial PC Processors Xeon (Nocona) Xeon (Inwindale) Find out more about Etasis Electronics at www .etasis.com.tw There’s only one standard™ Etasis Electronics Corporation Model No.: EFRP-2603 Dimension: 101.8(W) x 83.4(H) x 299.8(D) mm
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the EFRP-2603?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods