Manufacturers
ETA USA PFD36SX-U
Description
ETA-USA PFD36SX-U Power Supply. 120W | Open Frame | Chassis | 36VDC Single Channel Output | 85-264V AC Input
Part Number
PFD36SX-U
Price
Request Quote
Manufacturer
ETA USA
Lead Time
Request Quote
Category
Power Supply
Features
- Cost effective
- Designed for peak loads (twice rated output)
- Low line distortion
- Power Factor correction
- Pulse load response
- Universal input
Datasheet
Extracted Text
AC/DC SWITCHING POWER SUPPLY AC/DC SWITCHING POWER SUPPLY AC INPUT 85~264 AC INPUT 85~264 SINGLE CHANNEL OUTPUT SINGLE CHANNEL OUTPUT 120 WATTS 120 WATTS PFD-SX SERIES General Description “PF” Series AC/DC Switching power supplies have been designed to meet harmonic current distortion. PF Series has a 75W PFC with the peak of 150 W, a 120W PFD with peak of 240W and 240W PFE with a peak of 480W. They are suitable for motor drive. Application Features Motor Drive 1. Chassis Mount Input 2. Frameless, Connector Type 3. Low Line Distortion Input Voltage: AC100-230V 4. Pulse Load response Input Voltage AC85-264V 5. Designed for peak loads (Doubled for rate Range: 2.0-0.9 A output) Input Current: 50/60Hz 6. Power factor correction Frequency: 47-63Hz 7. Cost Effective Input Frequency : Single 8. Harmonic current complies to Range: 18A(max.) at AC100V IEC 1000-3-2, EN6 1000-3-2 Phase: 40A(max.) at AC230V 9. Universal input 85-264V Inrush Current: *1 1mA(max.) at 25°C 10. EMI designed to meet : FCC part 15-B Leakage Current: 0.75mA(max.) at 25℃ (rated input/ 11. Class B, EN 5502 Class B, VCCI Class B, output & rated input frequency) CE-marked acc. To LVD Options 1. Remote Control (add suffix “–R” or “–RR”) 2. Cover (add suffix “–P”) : * -“P” model dimension of chassis mount model is the same as “Open Frame “ model 3. Wire harness is 40 cm long Models Output Characteristic PFD12SX-U PFD24SX-U PFD36SX-U PFD48SX-U Output Voltage Vdc 12 24 36 48 Output Current A 10 / 20 5 / 10 3.4 / 6.7 2.5 / 5 Voltage Adjust V ± 10% of Rated Output Voltage(at no load within the input range) Range Ripple & mV 300 300 300 300 Noise(max)*3 pp Rise up time mS 500mS(maximum) at 25℃ and rated input/output Hold up time mS 50mS(minimum) at 25℃ and rated input/output Regulation Line Regulation mV 60 120 180 240 Load Regulation *3 mV 120 240 360 480 Temp. Coefficient *4 °C 0.03%/℃ Drift(maximum) *5 mV 75 135 195 255 Dynamic Load mV 360 720 1080 1440 Regulation (typ.) *6 Recovery Time *6 mS 0.5mS(typical) % 76 / 80 79 / 82 80 / 83 80 / 83 Efficiency *2 0.99 Typ. AC100 [V] / 0.95 Typ. AC230 [V] Power Factor ETA USA 16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.eta-usa.com Phone: 1-800-ETA-POWER, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com Conditions: *1 cold start *2 at AC 100/230V input, rated output and 25℃ *3 measured by a bayonet probe at the output connector at a 0 to 100MHz bandwidth *4 at -10 to +50°C *5 for 7 hour period after 1hour warm-up at 25℃ and rated input/output *6 when output current changed from 50% to 150% of rated output current rapidly at rated input *7 safety approved at 25℃ Environmental Specification Operating Temperature -10 to +50 °C Operating Humidity 20 to 85%/RH(non-condensing) Storage Temperature -20 to +85 °C Storage Humidity 10 to 85%/RH(non-condensing) Withstanding Voltage Primary-Secondary AC3,000V for 1minute Primary-Frame Ground AC2,500V for 1minute Secondary-Frame Ground AC500V for 1minute Isolation Resistance Primary-Secondary-Frame Ground 50MΩ (minimum) by DC500V insulation tester Vibration 5-10Hz:10mm double amplitude,10-55Hz:19.6m/s2,20minutes' period for 60minutes each along X,Y,Z axes(non-operating) Shock 294m/s2 Cooling Convection Environmental Agencies Line Conducted Noise Built to meet FCC Part15-B Class B Built to meet VCCI Class B Built to meet EN55022 Class B Line Harmonic Distortion Built to meet IEC61000-3-2 Safety UL: UL1950, IEC950 C-UL: CSA C22.2 No.950 VDE EN60950, IEC950, VDE0805 MTBF [H] 258,000 Switching Frequency[kHz] 140(typ.) Function/Protection Over current Protection Current Limiting with automatic recovery Over voltage Protection output shutdown (to reset, leave 1minute after shut-off) (≥110% of Rated Output Voltage[V]) Remote Sense not available Remote On/Off option Power Fail Detection not available Series Operation not available Parallel Operation not available Mechanical Dimension [mm] 95W × 220L × 55H Weight [g](typical) 680g/enclosed type:820g ETA USA 16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.eta-usa.com Phone: 1-800-ETA-POWER, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com D DIIM ME EN NS SIIO ON N D DIIA AG GR RA AM M ( (m mm m) ) BLOCK DIAGRAM BLOCK DIAGRAM ETA USA 16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.eta-usa.com Phone: 1-800-ETA-POWER, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com DERATING CURVE EFFICIENCY CURVE OCP CURVE *1 cold start *2 at AC 100/230V input, rated output and 25℃ *3 measured by a bayonet probe at the output connector at a 0 to 100MHz bandwidth *4 at -10 to +50°C at the output connector at a 0 to 100MHz bandwidth ETA USA 16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.eta-usa.com Phone: 1-800-ETA-POWER, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the PFD36SX-U?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods