Industrial Trading

Description

ETA-USA FHF48SX-U 300 Watt AC/DC Converter

Part Number

FHF48SX-U

Price

Request Quote

Manufacturer

ETA USA

Lead Time

Request Quote

Category

AC-DC Converter

Specifications

Adjustable voltage

± 10%, (+10,-20%(FHF3.3SX only)

Current on full road

4.9A/2.3A(Input 115VAC/230VAC); 6.5A/3.5A(Input 115VAC/230VAC)

Drift / Time effect

(Output V X 0.5%)+15mV/8H (After 1 H)

Frequency

50/60Hz

Hold-up time

60mSTyp

Humidity

10 ~ 85%

Input regulation

0.5%MAX

Inrush current

12A/24A MAX(Input 115VAC/230VAC)

Insulation resistance

(Input-Output-Chassis):50M MIN

Leakage current

1mAMAX(Input 115VAC/230VAC) FHF-SX; 0.24mATyp/0.6mATyp(Input 115VAC/230VAC)FHP-SX

Load regulation

1.0%MAX

Operating temperature

-5 ~ +50°C

Over-current protection

Automatic reset

Over-voltage protection

Output shutdown

Phase

Single

Power factor & harmonic correction range

85~255VAC

Power factor correction

Active filter circuit with booster

Remote control

Possible

Remote sensing

Possible

Ripple & noise

(Output V x 1%)+100mVp-p MAX

Rise up time

300mS/150mS(Input 115V/230VAC)

Shock

30G

Storage temperature

-20 ~ +85°C

Switching frequency

Possible

Temperature coefficient

0.03% / °C(-5~50°C)

Vibration

(5 ~ 10Hz) Amplitude (peak to peak), 10mm(constant) (10 ~ 55Hz), Acceleraton 2G

Voltage nominal

AC115~230V (Wide range)

Voltage range

85~264VAC

Weight

1.9kg(FHF-SX), 2.1kg(FHP-SX)

Withstand voltage

130KHz; (Input-Output):AC3000V(1 Minute); (Input-Chassis):AC2500V (1 Minute); (Output-Chassis):AC 500V (1 Minute)

Datasheet

ETA-USA-FHF 24SX-datasheet1-2087994043.pdf

159 KiB

Download

Extracted Text

ETA-USA 300W/450W 300W/450W High Quality Switching Power Supplies 85-264VAC Power - Facter Correction 300W 450W FHF-SX SERIES FHP-SX-U SERIES Output Table Output Table FHF-SX (AC85~264V) 120X170X93 (mm) FHP-SX-U (AC85~264V) 120X190X93 (mm) OUTPUT OUTPUT EFFICIENCY EFFICIENCY MODEL VOLTAGE CURRENT MODEL VOLTAGE CURRENT FHF 3.3SX 3.3V 60A 67% FHP 3.3SX-U 3.3V 90A 68% FHF 05SX 5V 60A 72% FHP 05SX-U 5V 90A 70% FHF 06SX 6V 50A 73% FHP 06SX-U 6V 75A 71% FHF 12SX 12V 27A 75% FHP 12SX-U 12V 40A 75% FHF 15SX 15V 22A 76% FHP 15SX-U 15V 32A 78% FHF 24SX 24V 14A 78% FHP 24SX-U 24V 20A 79% FHF 30SX 30V 11A 78% FHP 30SX-U 30V 16A 77% FHF 36SX 36V 9A 78% FHP 36SX-U 36V 13A 79% FHF 48SX 48V 7A 80% FHP 48SX-U 48V 10A 80% FHF/P Series are a new generation of powersupplies. Its the lat- Special F Features est design following the international standards and market 1. Power factor 115Vac=0.99 230Vac=0.96 (FHF-SX) demands. This type of powersupply has all in one : Power factor 115Vac=0.98 230Vac=0.92 (FHP-SX-U) correction, low line distortion according to EN 60555-2, electro 2. Harmonics acc. to EN 60555-2 IEC 1000-3-2 magnetic Interference (EMI) complies to VDE 0871/13, EN 3. EMI : complies with FCC class B VDE class B (FHF-SX) 55022/13, FCC level B. Safety is compling to VDE/EN 60950, UL /EN55022 class B(FHP-SX-U) 1950, CSA 234. The size is compatible with WR Series. High 4. approved:UL1950, EN60950, VDE0805, CSA234 (C-UL) efficiency and power factor correction is an optimal combination (FHF-SX pending) of good cost-performance fot both, end-user and power produc- 5. CE marked to the low voltage directive (FHF-SX pending) tion companies. Applications Process control, Office-Equipment, Computer Peripherals, Telecommunication, Industrial Electronics and Machines, Household-Equipment Dimention ( (mm) F FH HF F-S SX X SERIES Terminal C Connection Dimention ( (mm) F FH HF F-S SX X SERIES Terminal C Connection Terminal cover is attached * 300W FHF-SX SERIES STANDARD SPECIFICATION 450W FHP-SX-U SERIES INPUT GENERAL SPECIFICATION Voltage nominal :AC115~230V (Wide range) Power factor correction :Active filter circuit with booster Voltage range :85~264VAC Over-current protection :Automatic reset Over-voltage protection :Output shutdown Power factor & harmonic :85~255VAC correction range Remote control :Possible Frequency :50/60Hz Remote sensing :Possible Current on full road :4.9A/2.3A(Input 115VAC/230VAC) Switching frequency :Possible FHF-SX Withstand voltage :130KHz :(Input-Output) :AC3000V(1Minute) :6.5A/3.5A(Input 115VAC/230VAC) FHF-SX :(Input-Chassis) :AC2500V (1Minute) Inrush current :12A/24A MAX(Input :(Output-Chassis) :AC 500V (1Minute) 115VAC/230VAC) FHF-SX Insulation resistance :(Input-Output-Chassis):50M MIN. :10A/20A MAX(Input Leakage current :1mAMAX(Input 115VAC/230VAC) FHF-SX 115VAC/230VAC)FHP-SX Phase :Single :0.24mATyp/0.6mATyp(Input 115VAC/230VAC)FHP-SX OUTPUT Weight :1.9kg(FHF-SX), 2.1kg(FHP-SX) Adjustable voltage :± 10%, (+10,-20%(FHF3.3SX only) ENVIRONMENT Ripple & noise :(Output V x 1%)+100mVp-p MAX(1) Input regulation :0.5%MAX Operating temperature :-5 ~+50°C (2) Load regulation :1.0%MAX :-20~+85°C Temperature coefficient :0.03% / °C(-5~50°C) Storage temperature :10~85% Drift / Time effect :(Output V X 0.5%)+15mV/8H (After 1 H) Humidity :(5~10Hz) Amplitude (peak to peak) Rise up time :300mS/150mS(Input 115V/230VAC) Vibration 10mm(constant) (10~55Hz) FHF-SX Acceleraton 2G (3) :500mS/200mS(Input 115V/230VAC) Shock :30G (3) FHF-SX Hold-up time :60mSTyp(FHF-SX), 20mSTyp (FHP-SX) FUNCTIONS Remote sensing is possible Remove attached ± short piece and connect with load by using twist pair wire. While doing above, voltage drop shall be less than 0.3V (one line 0.15V). Remote control Output normal by short or L (0~0.4V) Output shutdown by open or H (1~6V) Input current shall be less than 0.1 (A) while Series and parallel operation is possible -Parallel operation Connect P terminals to each ether rated current of parallel is -The voltage agrees with lower one. -Operate with number of power source four or less Power fail Please refer about P.F to our Sales Dep. OUTPUT DERATING F FH HF F-S SX X SERIES (300W) F FH HP P-S SX X SERIES (450W) Load & & O Output V V. Load & & O Output V V. B Bllo oc ck k D Diia ag gr ra am m FHF-SX FHP-SX ETA-USA Visit Us On The Web at: http://www.eta-usa.com/ 16315 Vineyard Blvd. Morgan Hill, CA 95037 Or Email at: sales@eta-usa.com Phone: 1-800-ETA-POWER, (408) 778-2793 Fax: (408) 779-2753

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products