Manufacturers
ETA USA DPCI-3U250-24
Description
ETA/USA DPCI-3U250-24 DC/DC Compact PCI
Part Number
DPCI-3U250-24
Price
Request Quote
Manufacturer
ETA USA
Lead Time
Request Quote
Category
Systems
Specifications
Altitude
Operating to 10,000 ft; Storage to 30,000 ft
Cooling
A minimum of 600 lfm direct forward airflow required to achieve full rated power and specified MTBF. Consult factory for derating guide-lines with reduced or reversed airflow
Efficiency
78% typical at AC 115V, full load.
EMI Filtering
Meets IFCC Level A, and EN 55022 Level A (conducted).
Frequency
47-63Hz
Fusing
Internal line fuse provided, non-user serviceable. AC-4.0A, 250V; DC- 10.0A
Guide Rails
Supplied with .260[6.61] offset guide rails for use with Rittal 3687.832 (or equivalent) PSU guides
Input Current
6.55A
Input DC Voltage Range
36-72 Vdc (48Vdc)
Input voltage range
90-264 Vac
Inrush Current
15Apk @ AC 115V; 30Apk @ AC 230V. (Thermistor soft start. ~25ºC AC cold start current)
MTBF
Designed for 150,000 hrs at 25ºC
Operating Temperature
0º – 50ºC ambient at full load, with specified airflow. Derates linearly to 50% at 70ºC
Operational Vibration
0.75G peak, 5 – 500Hz along three orthogonal axes
Over Current/Short Circuit Protection
Current limit on all outputs. Automatic recovery when overload is removed
Over Temperature Protection
Internal temperature sensing. Causes all outputs to shut down. Automatic recovery
Over Voltage Protection
Non-crowbar type. Any output that exceeds 25% ±10% of nominal Vout will cause all outputs to latch off. Remote inhibit, enable or input recycle required resetting
Over/Under Shoot
None at turn-on or turn-off
Parallel Operation
not available
Phase
Single
Power Factor
0.99 line PFC typical at AC 115V, full load
Relative humidity
Up to 90% RH, non-condensing
Remote Sense
V1, V2, V3 outputs compensate for up to 0.25V total line drop in the load cables. Outputs are internally sensed if leads are opened
Retaining Latches
Supplied with a single Rittal #3686.135 Type VII (Telecom) Lower Latch. Other manufacturers and types available. Consult factory
Series Operation
available
Storage Humidity
less than 85%/RH (non-condensing)
Storage Temperature
-40º – +75ºC
Transient Protection
MOV. Withstands transients as specified by IEEE C62.41 3KV (differential and common mode)
Under Voltage Warning
Any output dropping below 10% of nominal triggers the power fail warning signal
Weight Approx
1.8 lbs/1.06 kgs
Features
- .99 Power Factor Corrected AC 90-264V Input, or DC 36-72V.
- Current Sharing on 5.0V and 3.3V +12.0V Outputs.
- Excellent Performance, Competitively Priced.
- Hot Swap, N+1 Redundant with Internal OR-ing Diodes.
- Standard 47 Pin Connector Configurations.
- Standard PCI Output Voltages: 5.0V, 3.3V, ±12.0V, with Variable Currents.
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the DPCI-3U250-24?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods