Dynamic Load Regulation [mV](typical)
450
Efficiency [%] (typical)
84
Hold Up Time
20mS(typical) at 25°Cand rated input/output
Humidity
Operating:20 to 85%/RH(non-condensing); Storage:20 to 85%/RH(non-condensing)
Input Current
1.7A at AC100V/0.9A at 230V
Input Frequency Range
47-440Hz
Input Range
AC85-264V(DC110-350V)
Inrush Current
20A(maximum) at AC115V/40A(maximum) at AC230V
Isolation resistance
Primary-Secondary-Frame Ground 50MO(minimum) by DC500V insulation tester
Leakage Current
0.75mA(maximum) at 25°C,rated input/output and rated input frequency
Line Conducted Noise
Built to meet FCC Part15-B Class B; Built to meet VCCI Class B; Built to meet EN55022 Class B
Overcurrent Protection, >110% of Rated Output Current[A]
Current Limiting with automatic recovery; 5.5
Overvoltage Protection, >115% of Rated Output Voltage[V]
Output shutdown(to reset,leave 1minute after shut-off; 17.3
Recovery time
0.5mS(typical)
Remote On/Off
not available
Remote sense
not available
Ripple and Noise [mVp-p](maximum)
250
Rise up time
300mS(maximum) at 25°C and rated input/output
Safety
UL:UL1950; C-UL:CSA C22.2 No.950; VDE:EN60950, IEC950, VDE0805
Statistic Line Regulation [mV](maximum)
120
Statistic Load Regulation [mV](maximum)
135
Switching Frequency[kHz](typical)
140
Temperature
Operating:open board type:-10 to +50°C/enclosed type:-10 to +40°C; Storage: -20 to +85°C
Temperature Coefficient
0.03%/°C
Vibration
5-10Hz:10mm double amplitude,10-55Hz:19.6m/s2,20minutes' period for 60minutes each along X,Y,Z axes(non-operating)
Voltage Adjust Range
+/- 10% of Rated Output Voltage(at no load within the input range)
Weight (Typ)
open board type:280g/enclosed type:520g
Withstanding Voltage
Primary-Secondary:AC3,000V for 1minute; Primary-Frame Ground:AC2,500V for 1minute; Secondary-Frame Ground:AC500V for 1minute
Datasheet
Extracted Text
75 WATT
AC-DC
CONVERTER
BWC-SX SERIES
Specifications Model
BWC**SX-U
BWC3.3SX-U BWC05SX-U BWC12SX-U BWC15SX-U BWC24SX-U BWC30SX-U BWC36SX-U BWC48SX-U
75WATTS/SINGLE
Input Characteristic
Input Voltage AC100/230V
Input Current 1.7A at AC100V/0.9A at 230V
Input Range
AC85-264V(DC110-350V)
Input Frequency 50/60Hz
Input Frequency Range 47-440Hz
Phase
Single
Inrush Current *1 20A(maximum) at AC115V/40A(maximum) at AC230V
Efficiency [%] (typical) *2 77 81 84 84 86 86 88 87
OCP Curve Efficiency Curve
ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com
BWC Specification
Specifications Model
BWC**SX-U
BWC3.3SX-U BWC05SX-U BWC12SX-U BWC15SX-U BWC24SX-U BWC30SX-U BWC36SX-U BWC48SX-U
75WATTS/SINGLE
Output Characteristic
Output Voltage [V] 3.3 5 121524303648
Output Current [A] 15.0 15.0 6.3 5.0 3.2(P4.5) 2.5 2.1 1.6
Voltage Adjust Range +/- 10% of Rated Output Voltage(at no load within the input range)
Ripple and Noise [mVp-p](maximum) *3 120 150 220 250 340 400 460 580
Regulation
Statistic Line Regulation [mV](maximum) 26.4 40 96 120 192 240 288 384
Statistic Load Regulation [mV](maximum) 29.7 45 108 135 216 270 324 432
Temperature Coefficient *4 0.03%/℃
Drift[mV](maximum) *5 31.5 40 75 90 135 165 195 255
Dynamic Load Regulation [mV](typical) *6 99 150 360 450 720 900 1080 1440
Recovery Time *6 0.5mS(typical)
Rise up time 300mS(maximum) at 25℃ and rated input/output
Hold up time 20mS(typical) at 25℃ and rated input/output
Functions
Overcurrent Protection ≧ 110% of Rated Output Current[A]
Current Limiting with automatic recovery
16.5 16.5 6.93 5.5 ≧ Peak 2.75 2.31 1.76
Overvoltage Protection ≧ 115% of Rated Output Voltage[V]
Output shutdown(to reset,leave 1minute after shut-off)
3.8 5.75 13.8 17.3 27.6 34.5 41.4 55.2
Remote Sense not available
Remote On/Off not available
Environmental
Operating Temperature open board type:-10 to +50℃ /enclosed type:-10 to +40℃
Operating Humidity 20 to 85%/RH(non-condensing)
℃
Storage Temperature -20 to +85
Storage Humidity 20 to 85%/RH(non-condensing)
Withstanding Voltage Primary-Secondary AC3,000V for 1minute
Primary-Frame Ground AC2,500V for 1minute
Secondary-Frame Ground AC500V for 1minute
Isolation Resistance Primary-Secondary-Frame Ground 50MΩ(minimum) by DC500V insulation tester
2
Vibration
5-10Hz:10mm double amplitude,10-55Hz:19.6m/s ,20minutes' period for 60minutes each along X,Y,Z axes(non-operating)
2
Shock 196m/s
Cooling Convection
? Leakage Current 0.75mA(maximum) at 25℃ ,rated input/output and rated input frequency
? Line Conducted Noise Built to meet FCC Part15-B Class B
Built to meet VCCI Class B
Built to meet EN55022 Class B
? Safety UL: UL1950
C-UL: CSA C22.2 No.950
VDE: EN60950, IEC950, VDE0805
Weight (typical) open board type:280g/enclosed type:520g
? MTBF [H] 500,000
? Switching Frequency[kHz](typical) 140
Conditions:
*1at cold start
*2 at DC130V input/rated output
*3 measured by a bayonet probe at the end of a pair of 15cm long wires terminated with a 100uF electrolytic
capacitor and 0.1uF film capacitor in parallel at a 0 to 100MHz bandwidth
*4 open board type: at -10 to +50℃ /enclosed type: at -10 to +40℃
*5 for 7hour period after 1hour warm-up at 25℃ and rated input/output
*6 when output current changed from 25% of rated output current to 75% rapidly at rated input
ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com
Derating Curve
Block Diagram
Dimension (mm)
ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com
Frequently asked questions
Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts.
We know where to find the rare and obsolete equipment that our customers need in order to get back to business.
There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.
The warranty we offer will be based on what we negotiate with our suppliers.
Sometimes, a part will be sold as-is and without a warranty.
Our specialty, single board computers, tend to receive a one-year warranty.
We use FedEx, UPS, DHL, and USPS.
We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer.
However, we can use other carriers if it will be more convenient for you.
Industrial Trading will definitely serve you.
We work with international clients all the time,
and we are familiar with shipping to destinations all across the globe.
Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading.
We will also accept payment made with wire transfer or PayPal.
Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods