Manufacturers
ETA USA BFE05SX
Description
ETA-USA BFE05SX Power Supply - 150 Watt Switching Power Supply
Part Number
BFE05SX
Price
Request Quote
Manufacturer
ETA USA
Lead Time
Request Quote
Category
Power Supply
Specifications
Cooling
Convection
Dimension [mm]
75W × 180L × 38H
Drift(maximum)mV
20
Dynamic Load Regulation (typ.)mV
0.2
Efficiency %
80/82
Hold up time mS
20mS(minimum) at 25°C and rated input/output
Isolation Resistance
Primary-Secondary-Frame Ground 50MO(minimum) by DC500V insulation tester
Line Conducted Noise
Built to meet FCC Part15-B Class B; Built to meet VCCI Class B; Built to meet CISPR Class B; Built to meet EN55022 Class B
Line Harmonic Distortion
Built to meet IEC61000-3-2
Line Regulation mV
15
Load Regulation mV
40
MTBF [H]
347000, 377000, 398000
Operating Humidity
less than 85%/RH(non-condensing)
Operating Temperature
-10 to +50 °C
Output Current A
30
Output Voltage Vdc
5
Over current Protection
Current Limiting with automatic recovery
Over voltage Protection
output shutdown(to reset,leave 1minute after shut-off)
Parallel Operation
not available
Power Factor
0.98(typical) at AC100V/0.92(typical) at AC230V
Power Fail Detection
not available
Recovery Time
5 mS(typ.)
Remote On/Off
not available
Remote Sense
not available
Ripple&Noise(max)mVpp
120/160
Rise up time mS
500mS(maximum) at 25°C and rated input/output
Safety
UL:UL60950-1 2nd edition, IEC61000-3-2 C-UL: CSA60950, VDE EN60950-1 2006, IEC950,
Series Operation
available
Shock
294m/s2
Storage Humidity
less than 85%/RH(non-condensing)
Storage Temperature
-20 to +85 °C
Switching Frequency[kHz]
100(typ.)
Temperature Coefficient
°C 0.03 %/°C
Vibration
5-10Hz:10mm double amplitude,10-55Hz:19.6m/s2,20minutes' period for 60minutes each along X,Y,Z axes(nonoperating)
Voltage Adjust Range V
±10% of Rated Output Voltage
Weight [g](typical)
420g
Withstanding Voltage
Primary-Secondary AC3,000V for 1minute; Primary-Frame Ground AC2,500V for 1minute; Secondary-Frame Ground AC500V for 1minute
Datasheet
Extracted Text
AC/DC SWITCHING POWER SUPPLY AC/DC SWITCHING POWER SUPPLY A AC C IIN NP PU UT T 8 85 5~ ~2 26 64 4 S SIIN NG GL LE E C CH HA AN NN NE EL L O OU UT TP PU UT T 1 15 50 0 W WA AT TT TS S BFE-SX-U1 SERIES General Description “BF”-Series AC/DC Switching power supplies are board type power supplies matched with new designs, which is in accordance with harmonic current regulation, of ultra-small sizes, high efficiency and low cost. By adopting the synchronization regular method (output less than 6 V) for the first time for this class of devices, BF-Series is 40mm smaller in depth compared with equivalent products by other makers. At the same time low cost is realized to meet market needs. Application Features Industrial 1. Board Type Input 2. Ultra Small size AC100-240V 3. Universal input(AC 85V to 264V) Input Voltage: 4. Harmonic current complies to IEC61000-3-2 AC85-264V Input Voltage Range: 5. Power factor BFE: 0.98/0.93 (AC 100/230V) 2.0-0.9 A Input Current: 6. High efficiency 50/60Hz Frequency: 7. Low Cost 47-63Hz Input Frequency Range: 8. EMI: complies to FCC class B, or EN55022 Single Phase: class B, or VCCI class B 18A(typ.) at AC100V Inrush Current: *1 9. Safety: UL 60950, C-UL, EN 60950-1 41A(typ.) at AC230V Leakage Current: 1mA(maximum)at 25°C Options (rated input/output and N/A rated input frequency) Models Output Unit BFE3.3SX BFE05SX BFE06SX BFE09SX BFE12SX BFE15SX BFE24SX BFE36SX BFE48SX Characteristic Vdc 3.3 5 6 9 12 15 24 36 48 Output Voltage A 30 30 25 17 13 10.5 6.7 4.5 3.4 Output Current V Voltage Adjust Range ±10% of Rated Output Voltage mVpp 120/160 Ripple&Noise(max)*2 150 at 0 to 40°C /180 at -10 to 0°C mS Rise up time 500mS(maximum) at 25°C and rated input/output mS Hold up time 20mS(minimum) at 25°C and rated input/output Regulation mV 9.9 15 18 27 36 45 72 108 144 a. Line Regulation mV 40 40 50 40 40 40 100 150 150 b. Load Regulation *3 °C c. Temperature 0.03 %/°C Coefficient *4 mV 13.2 20 24 36 48 60 96 144 192 d. Drift(maximum) *5 mV e. Dynamic Load 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.5 Regulation (typ.) *6 mS f. Recovery Time *6 5 mS(typ.) % 76/79 80/82 80/83 82/85 83/86 83/86 84/87 85/88 85/88 Efficiency 0.97/0.92 0.98(typical) at AC100V/0.92(typical) at AC230V Power Factor ETA USA 16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.eta-usa.com Phone: 1-800-ETA-POWR, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com Environmental Specification Operating Temperature -10 to +50 °C Operating Humidity less than 85%/RH(non-condensing) Storage Temperature -20 to +85 °C Storage Humidity less than 85%/RH(non-condensing) Withstanding Voltage Primary-Secondary AC3,000V for 1minute Primary-Frame Ground AC2,500V for 1minute Secondary-Frame Ground AC500V for 1minute Isolation Resistance Primary-Secondary-Frame Ground 50MΩ(minimum) by DC500V insulation tester Vibration 5-10Hz:10mm double amplitude,10-55Hz:19.6m/s2,20minutes' period for 60minutes each along X,Y,Z axes(non- operating) Shock 294m/s2 Cooling Convection Environmental Agencies Line Conducted Noise Built to meet FCC Part15-B Class B Built to meet VCCI Class B Built to meet CISPR Class B Built to meet EN55022 Class B Line Harmonic Distortion Built to meet IEC61000-3-2 nd Safety UL: UL60950-1 2 edition, IEC61000-3-2 C-UL: CSA60950 VDE EN60950-1 2006, IEC950, MTBF [H] 347000 377000 398000 Switching Frequency[kHz] 100(typ.) Function/Protection Over current Protection Current Limiting with automatic recovery Over voltage Protection output shutdown(to reset,leave 1minute after shut-off) Remote Sense not available Remote On/Off not available Power Fail Detection not available Series Operation available Parallel Operation not available Mechanical Dimension [mm] 75W × 180L × 38H Weight [g](typical) 420g Conditions: *1 cold start *2 measured by a bayonet probe at the end of a pair of 5cm long wires terminated with a 100uF electrolytic capacitor and 0.1uF film capacitor in parallel at a 0 to 100MHz bandwidth *3 when output current changed from 0mA to rated output current *4 at -10 to +40°C *5 for 7hour period after 1hour warm-up at 25°C and rated input/output *6 when output current changed from 25% to 75% of rated output current rapidly at rated input ETA USA 16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.eta-usa.com Phone: 1-800-ETA-POWR, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com D DIIM ME EN NS SIIO ON N D DIIA AG GR RA AM M ( (m mm m) ) BLOCK DIAGRAM BLOCK DIAGRAM ETA USA 16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.eta-usa.com Phone: 1-800-ETA-POWR, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com DERATING CURVE EFFICIENCY CURVE OCP CURVE ETA USA 16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.eta-usa.com Phone: 1-800-ETA-POWR, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the BFE05SX?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
ETA-USA DTD120-24SX-F-W Power Supply - AC Adapters 24vdc
ETA-USA's FHP-05SX-U 300-WAtt AC/ DC Converter, 115V, harmonics acc. to the EN55022 Class B, approve...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods