Outside Plant for ™ Business-Critical Continuity URLS10 10-Pair IDC Terminal Block Key Features Description • No tools required for pair-at-a-time The CAT5e certified URLS10 is an indoor/outdoor 10-pair terminal block for connecting ActCap connections solid copper communications wire. All connections are IDC (insulation displacement con- nection), made without removing the insulation from the wire. The contact terminals • IDC termination on all connections slice through the insulation and create a gas-tight contact at the copper/terminal inter- for fast, easy termination and face. jumpering with no wire stripping Two models are available – the URLS10 for indoor installations, and the sealant-filled • Sealant-filled connectors on URLS10S for use in outdoor or environmentally-challenging installations. Both models are the URLS10S provide moisture assembled from two primary components – a URLS connector module and a URLS base. resistance and longer-life termination for environmentally- The connector module contains metallic contacts that provide electrical and test con- nections. Located on the top of the connector module, ten ActCaps guide single-pair challenging installations cable into proper terminating position, connecting the cable pair to the metallic contacts. Wires are then terminated by pressing down on the ActCap, requiring only a push of the • Half-tap capability permits installer’s thumb. The ActCaps can terminate 20- through 26-gauge (.4 to .8 mm) con- multiple appearances of jumper ductors. Test results verify that ActCaps can terminate 24-gauge wire more than 250 wire times with stable, low contact resistance. • Continuity and directional testers The base can terminate 22 through 26-gauge (.4 to .6 mm) conductors. Up to 10 pairs provide more complete testing of from the incoming cable stub can be terminated on the base using an available termi- the circuit nation tool. Wires are cut to the proper length during the termination process. Tools are available for either ten-pair-at-a-time (URLSFIXTURE) or single-wire termination • Variety of frame pair counts and (URLSTOOL1). The single-wire termination tool is perfect for low pair count installations, cable repair, and maintenance. sizes for maximum application and installation flexibility URLS blocks are molded from glass-filled Valox for long-term performance. Electrical terminals are fabricated from tin-plated phosphor bronze for low contact resistance. The • Compact size makes URLS ideal for sealant used in the URLS10S protects against corrosion caused by high humidity and salt applications where space is limited in street-side and coastal installations. • Available installed in cross-connect URLS blocks can be mounted to industry-standard 4.12-in. (10.4 cm) wide mounting and building entrance terminals to frames in a variety of pair counts. Close-pitch frames are available for higher terminal fit a variety of applications density. Rod mount kits are also available. • UL Listed and CE Marked for documented performance and Application safety compliance These blocks can be used in a variety • CAT5e certified for improved of indoor and outdoor distribution, transmission performance cross-connect, and building entrance applications. The URLS10 is designed for copper wire terminals and cross connect systems throughout the communications network. It is ideal for use in outdoor remote electronic equipment enclosures with limited space for wire termination. 1 OSPDS-060100 / 1109 URLS10 10-Pair IDC Terminal Block Figure 1: URLS Block Figure 2: Connector Module and Base a) Single Pair Tester ActCap b) Single Pair URLS Half Tap Incoming Wire c) Single Pair Disconnect Plug d) Red Special Service Cap Ordering Information & Dimensions Catalog Number Part Number Description H W D URLS10 F800799 10-pair URLS IDC terminal block 31.75mm (1.25-in.) 129.29mm (5.09-in.) 16.51mm (0.65-in.) URLS10S F800800 10-pair URLS IDC terminal block w/sealant 31.75mm (1.25-in.) 129.29mm (5.09-in.) 16.51mm (0.65-in.) NOTE: Dimensions with base assembly installed. Accessories Catalog Number Part Number Description Fig. URLS1TEST1M F800801 Single-pair (continuity-bridge) tester w/one-meter test cord 2 wire # 6 Ring term (Fig. 2) 1a URLS2TEST1M F800802 Single-pair break tester w/one meter test cord 4 wire # 6 Ring term (Fig. 2) 1a URLSHALFTAP F800804 Single-pair URLS half-tap, 10/pkg. (Fig. 2) 1b URLSHALFTAP10S F800572 Single-pair URLS half-tap with sealant, 10/pkg. (Fig. 2) 1b URLSDISCPLUG1 F800803 Single-pair disconnect plug, 100/pkg. (Fig. 2) 1c URLSDISCPLUG10 F596092 10-pair disconnect plug 10/pkg. 1c URLSTOOL1 F1001087 Single-wire incoming cable grooming and terminating tool URLS10TERMFM F800569 10-pair incoming frame mount cable grooming and terminating tool RLSBBIDENT1800B F017865 Pair identification plugs for 1-1800 pairs (Blue) RLSBBIDENT1800G F017866 Pair identification plugs for 1-1800 pairs (Green) RLSFRAME50 F607095 Metal frame for mounting up to five URLS 10-pair blocks (50 pair) RLSFRAME60 F017809 Metal frame for mounting up to six URLS 10-pair blocks (60 pair) URLS10TERMRM F1002830 10-pair feeder termination tool rod mount URLSCAPRED F800568 Special service caps (Red) 100/pkg. 1d NOTE: Rear mounted protection cartridge for overvoltage protection available soon. Contact customer service. AC Power Embedded Power Precision Cooling Emerson Network Power. Connectivity Infrastructure Management & Monitoring Racks & Integrated Cabinets The global leader in enabling Business-Critical Continuity™. DC Power Outside Plant Services Embedded Computing Power Switching & Controls Surge Protection Emerson Network Power © 2009 Emerson Network Power Energy Systems, Energy Systems North America, Inc. All rights reserved. 4350 Weaver Parkway, Warrenville, IL 60555 ® ™ ™ Emerson , Emerson Network Power , Business-Critical Continuity , Toll Free: 800-800-1280 (USA and Canada) ™ ™ ™ NetReach , NetSpan and NetXtend are trademarks of Telephone: 440-246-6999 Fax: 440-246-4876 Emerson Electric Co. and/or one of its subsidiaries. Web: EmersonNetworkPower.com/OSP Printed in USA 2 OSPDS-060100 / 1109