DIVERSIFIED TECHNOLOGIES LBC8927
Specifications
Form Factor
PICMG
Ethernet Chipset
Intel 82559
System Chipset
Intel 100
Video Chipset
C&T 69000
Datasheet
Extracted Text
PCI/ISA Single Board Computer LBC8927 Dual 10/100 PCI Video ® E• Single/Dual Intel PentiumIII t Processor with 512 KB L2 3.3V GeneratorCache at 1.26 GHz SDRAM M TM • ServerWorks ServerSetIII LE Chipset with 133MHz FSB • Up to 2 GB SDRAM w/ ECC • PCI Video with 2 MB ISA Bus SDRAM Memory • Dual 10/100 Base-TX Ethernet 64 bit / 66 MHz • Dual Channel Ultra DMA/33 PCI Bus IDE • USB, Serial, and Parallel Pentium III Processors Portswith 512K L2 Cache Diversified LBC8927PICMG passive backplane compliant SBC with single/dual Pentium III with 512KB L2 cache processors and dual NICs addresses intense SMP computational network applications. The extraordinary LBC8927industrial single board computer features one or two .13 micron Pentium III with 512KB L2 cache FC-PGA2 processors, Symmetric Multi-Processing 1.4 compliant, and up to 2GB PC133 SDRAM DIMMs, with full ECC support, on two sockets. Onboard are two 10 Base-T / 100 Base-TX Ethernet auto-negotiating con- trollers, dual channel PCI UDNA/33 IDE support, as well as Universal Serial Bus (USB) ports, serial/parallel ports, floppy interface and a PCI SVGA CRT controller with 2 MB of SDRAM memor.y The LBC8927uses the ServerWorks ServerSetIII LE chipset providing a 133 MHz system bus, a 32-bit/33MHz e on the onboard PCI Bus; the other PCI bus is routed to the backplane and supports up to two 64-bit / 66MHz or four 32/64-bit / 33MHz PCI I/O expansion slots. The OSB4 PCI-ISA bridge supports USB and legacy PC-A buffering FPGA provides 20-slot drive capabilit.y The Phoenix BIOS, in field upgradeable Flash, supports software Ethernet enable/disable, video override, serial/paral- lel port re-mapping/disable, keyboard disable, console redirection, and Pnr. Other features include a hardware monitoP (board and system voltages, temperature, and fan speed), programmable three-stage watchdog timer, power fail circuit, and a 2 year limited warranty Dual 1.26 GHz processors with 512KB L2 full core speed cache. Dual Fast Ethernet. 64-bit / 33-66MHz PCI bus & 133 MHz FSB. Powerful. Diversified echnology's TLBC8927PCI/ISA industrial SBC is the ultimate choice for appli- ,cation developers addressing high performance Datacom/Data Casting, and Military Intelligence Markets. m 7 1.800.443.266 www.dtims.co Telecom, CTI, Industrial Automation, Medical . AT I/O. An IS onboard PCI Bus Interface and a 64-bit/33-66MHz off-board PCI Bus Interface. The EIDE and Ethernet controllers ar Technology's DIM Etherne EID LBC8927 PCI/ISA Single Board Computer SSPECIFIC CPU / CacheClock / Calendars • One or two Intel .13 micron Pentium III • Real-time clock with 256 byte batteryInput powerTBD Processors with 512KB ECC L2 cache,backup CMOS RAMICC typ. *VTBD 1.26 GHz +, FC-PGA2 VTBD Misc. t• ServerIII LE / OSB4VTBD • PS/2 mouse and keyboard (two 6-pin One or two VRM 8.5 modules for processorBus Interfacemini-DIN on faceplate from 10-pin header) Vcore. Onboard 3.3V generator to minimize• 133MHz Front Side Bus; 33/66 MHz PCI• Speaker, reset, EIDE activity LED backplane power requirements.Busses; 8.33MHz ISA Bus (four 2-pin jumpers) * TBD • Supports two 64-bit/66MHz or four• Strobed CPU fans (two 3 pin headers) 64-bit / 33MHz slots• Power (4-pin Molex)l • High drive ISA buffers, up to 20 slots• Hardware Monitor - CPU and chassis fans,G GPI0, LEDs, SMBus; (20-pin header to:0° to 50°C / 32° to 122°F y chassis monitor)• Humidity (RNC):5 to 95% @ 40°C / 104°F • Two banks of one 168-pin latching DIMM • Altitude:4,572 m / 15,000 feet S • Shock:D• Up to 2GB using 64/128/256/512 x 72• PCI 2.1 compliant field upgradeable Phoenix :TBD PC133 Registered SDRAMBIOS, boot from LAN (PXE 2.0) • Support for memory hole at 15-16 MB;Data PathSTORAGE AND TRANSIT PnP V1.0a compatible• 64-bit / 133MHz on CPU and memory bus :-40° to +70°C / -40° to 158°F • Setup console redirection to serial port• Humidity (RNC):0 to 95% @ 40°C / 104°F • 64-bit / 66MHz on off-board PCI bus; (VT100 or ANSI mode) with CMOS• Altitude:15,240 m / 50,000 feet 32-bit / 33MHz on onboard PCI bus setup access • 16-bit on ISA bus• Shock:D • Software enable/disable onboard Ethernet:TBD Flash Memory • Diskless, keyboardless, and videoless • 2 Mb (256 KB) sectored Flash for BIOSy operation extensions; system, video, and third field upgrade • MTBF: >TBD hours @ 20°C / 68°F party option card ROM shadowing )• 4 KB serial EEPROM for user configuration • Advanced security features for floppy and • 1 year limited warranty O HDD; SymBIOS V2.3 and HDD S.M.A.R.T. • SCSI termination, USB and mouse/key- • USB Ports: two (one 4-pin header, one board voltage protected by self-resetting Type A on face plate) • Advanced thermal management (overheat s • Serial Ports: Two RS-232 (16C550) with 16alarm and auto slow down) byte FIFO as COM1-2 with BIOS selectable• Designed to meet or exceed:• Multiport support, custom BIOS graphical boot IRQs and addressing, (two male 10-pin- Safety: UL/cUL to 1950; CSA C22.2 y shrouded headers)No 950-93; EN 60950; EN50081-1 • Three-stage programmable watchdog • Parallel Port: One bi-directional with all- EMI/EMC:FCC 47 CFR Part 15 timer drives interrupt on 1st stage, NMI IEEE 1284 protocols supported and BIOSClass A; EN55022 Class A; EN50082 on 2nd stage, system reset on 3rd stage selectable IRQs and addressing, nOrdering Informatio • Hardware system monitor (voltages, CPU, (male 26-pin shrouded header) 0and board temperature, fan speed) • Floppy Disk: Support for two drives PCI/ISA SBC with single 1.26GHz• Power failure and two end-user defined (360 KB to 2.88 MB), (male 34-pin Pentium III 512KB processoropen-drain general purpose I/Os. shrouded header) OS Compatibility• EIDE: PCI Ultra DMA/33, support for 0MT® • Standard: PC and MS-DOSs;four drives (master/slave configuration); PCI/ISA SBC with dual 1.26GHz®®® 5; Windows 98sTNPIO Mode 4, Bus Master IDE or DMA Pentium III 512KB processorsTM 4.0/5.0; 95 OSR2; QNX; Red Hat Linux mode transfers up to 16.6 MB/s, (chipset MTSe• Optional: UnixW; limited) (two male 40-pin shrouded headers) MTMTPC133 SDRAMSCO Openserver; Novell;• Ethernet: Dual PCI 10 Base-T / 100 ®s2VxsBase-TX (Intel 82559), (two shielded RJ-45 on face plate w/ link and activityl )• 13.30 in. x 4.80 in. x 1.78 in. at CPU / fan (338 mm x 122 mm x 70 mm at CPU / fan) o • Double wide face plate • PCI SVGA CRT controller with 2 MB All products are shipped FOB factory (MS). T bus, PC• Conforms to IEEE P996 PC/AI SDRAM memory (C&T 69000), Specifications subject to change without notice. v. 2.1, & PICMG Revs. 2.0 standardRe (female DB-15 on face plate) Trademarks are the property of their respective s with resolution up to• Supports C . 800 x 600, 16.8M colors; 1024 x 768, .Copyright 2001 by Diversified 64K colors; or 1280 x 1024, 256 colors, All rights reserved. d For more information or to orde.r, please contact us mww 7 476 Highland Colony Parkway • Ridgeland, MS 39157 1.800.443.266 w.dtims.co non-interlace Technology owners RT Vide LEDs Mechanica Warp; SolariWorks; OS/ Cable Netware ; LynxOSar OPTION ; WindowWindows 9 3.X; Window LBC8927-D126 LBC8927-126 Supervisor fuse support I/ (Telecordia Reliabilit • Vibration TB • Temperature • Vibration TB BIOsocket Memor • Temperature OPERATIN Environmenta -12Works ServerSe +12 +5 Power Requirement ATION
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the LBC8927?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods