® G MII AIntegrated Single Board Computer S LBC8530 Up to 400Mhz Mobile Pentium II MMC-2:: PROCESSOR : Up to 400MHz Mobile Pentium II512MB EDO DRAM or 66MHz SDRAMThe LBC8530 supports up to 512MB of systemMMC-2 memory using two standard 168-pin DIMMs. BothMEMORY AGP Video with 2MB SGRAMEDO and SDRAM memories are supported. BIOSORGANIZATION: 2 banks(168 pin) DIMMS auto-sized and configured for optimal performance. Flat Panel Connection PCI BUS Integrated onboard the LBC8530 is a PCI-PCIPCI BUS SPEED: 33MHzDUAL PCI 10/100 Base-T bridge. This allows the LBC8530 to support master-Ethernet Ports ing on all backplane slots without having to disableBIOS: DTI Enhanced PHOENIX BIOS on-board peripherals.PCI Ultra Wide SCSI PCI IDE: 4 Drive EIDE, PIO modes 0 to 4,SYSTEM MONITOR PCI Enhanced IDE Controller The LBC8530 includes DTI’s standard Systembootable CDROM, U Floppy, Parallel, And Serial Ports temperatures and chassis fan speeds. User softwarePCI SCSI: Ultra Wide interface, up to can also be controlled through the use of the SystemsUSB port o features external fan/switch monitoring, alarmPCI ETHERNET: 2 Independent 10/100 BASE-TFull Mastering Support at Backplanedauto-negotiating ports serial port for remote communication through a 132 MB/SEC PCI bus Transfer modem or CPU-CPU connectionPROM DISK: ISA Solid State Hard Drive up to rates BAGP Video For maximum video performance, the LBC8530 33MHz PCI Bus Speed includes an AGP video controller integrated on-USB: UHCI compatible host controller board. S3’s Virge MX is provided with 2MB ofw/ 1 portReal Time Clock SGRAM and Flat Panel connectors that allow the LBC8530 to be used with today’s latest flat panelPlug-n-Play compatibleREALTIME: Includes 114 bytes CMOS RAM displays.CLOCK with long life battery Keyboard/Mouse Combined Port I The LBC8530 provides a high performance Ultra-PHYSICAL: 4.2x13.3 Flash BIOS Update Support Wide SCSI interface allowing data transfers to reach 40MB/s using the Adaptec 7880 controller.HUMIDITY : 0%-95% NON-CONDENSINGDTI Enhanced Phoenix BIOS DUAL Ethernet For highly fault tolerant applications, the LBC8530DTI System MonitorPOWER: TBD is integrated with two internally separate ethernet ports. Each port uses an Intel 82558 ethernet con- troller which supports auto-negotiating 10/100 Base- T connections. 601-856-4121 www.dtims.comMade in the U.S.A. 8/98 Rev. 1.0 PENTIUM II is a Trademark of Intel Corporation SCS 72M reporting, two stage watchdog timer, and a dedicate Monitor’s watchdog timer. The system monitor als 40MB/ Monitor. This System Monitor watches over all CP MEMORY FEATURESSPECIFICATIONS BU PCI/IS PENTIU PICM ® PENTIUMII 0 n PCI/ISA CPU Flat PanelwIEtlE nIs y l / ze SDRAM or EDO y / tMouse Por AGP Video r with 2MBAGP Video Mt t 1 e ® mIIsUp To 72MBdt )erkg2 The LBC8530 is a Mobile Pentium II MMC-2 singleels such as VGA, XGA, SVGA, and SXGA active matrixand bootable CDROM. This interface supports enhanced board computer which is offered in a full-size /AT PCITFT panel displays. Passive matrix flat panels like DSTNspeeds up to PIO mode 4. One to four devices can be sup- PICMG card form factor. The LBC8530 uses Intels MMC-a-e 2 Pentium Mobile Module which integrates a Pentium IIn-utilized with device drivers in advanced operating systems processor and an Intel 440BX chipset into one package.els, auto-expansion and centering for text and graphicssuch as Windows 95 and Windows NT. Intended for laptops, the mobile module package allowsmodes on high resolution panels, and advanced powerAn onboard flash disk is also provided. Once enabled industrial users to get the superior Pentium/440BX perfor-sequencing techniques for the panel power and control/datathis device acts like a hard drive and uses standard OS par- mance without the physical cost associated with the desktopsignals. The LBC8530 video control provides flat andtioning, formatting and coping utilities, without cables and SLOT 1 Pentium II package. Currently the maximumGouraud shading for 3D applications, high quality 3D tex-S Pentium II speed is 400MHz, consult DTI sales for higherture mapping, MIP-mapping, depth cueing, fogging, andwithout any floppy or hard drive connected to the system. options. Two standard 168-pin DIMM sockets are providedgThe embedded flash disk comes in a variety of sizes, cur- for support of up to 512MB of EDO DRAM memory orn-rently the maximum available is 72MB. Contact DTI sales 66MHz SDRAM. In addition to the primary cache, a sec-dent images on a CRT or flat panel. to discuss the possibility of size changes to the flash disk. ondary (L2) cache device is integrated in the Pentium IIThe LBC8530 implements a 32-bit PCI interface whichThe LBC8530 also features DTI’s standard System processor module. The Pentium II processor is Intel’sprovides burst transfer speeds up to 133 megabytes per sec-t- newest most advanced 80X86 compatible processor. Likeond. A PCI-PCI bridge is integrated on board the LBC8530age, temperature, fan operation and a watchdog timer. The the Pentium PRO processor, the PII improves the perfor-.system monitor provides eight inputs that can be configured mance from the previous generation of Intel processorsIt is designed to support four PCI devices which operate atas switch closure inputs or strobed inputs useful for moni- through the innovative use of its unique “Dynamic33MHz. The LBC8530 also provides outstanding ISA sup-toring the rotational speed of fans with strobe outputs. A Execution” micro-architecture. This micro-architecture is aport for non-PCI adapter cards. two-stage programmable watchdog timer is built into the wIntegrated onboard are two Intel’s 82558 Ethernet con-e see advanced data integrity, reliability, and serviceability fea-network connections for fault tolerant applications. BothSystem Monitor to transfer data and diagnostic information w-PCI ethernet interfaces provide fully auto-negotiatingthrough a modem or a CPU-CPU connection. 6ee family CPUs. In the case of the secondary (L2) cache, thetwisted-pair for up to 100 meters in length. Support is pro-Controller, Real Time Clock, floppy controller, RS-232 ser- Pentium II is different from the Pentium PRO processorvided for full duplex operation, allowing effective data ratesial ports, ECP/EPP parallel port, and field upgradeable flash where the TagRAM and BSRAM are individual separateto reach 20 Mbps and 200 Mbps, respectively. Support forBIOS are also integrated on to the LBC8530. DTI’s components in the processor module. eenhanced Phoenix BIOS, which includes ROM based The LBC8530 provides enhanced 3D graphics perfor-rSETUP and CONFIGURATION, is year 2000 (Y2K) com- mance by utilizing S3’s ViRGE/MX with 2MB of SGRAMoperating systems. pliant. which provides entry level support for the AcceleratedThe LBC8530 provides a high performance Ultra-Wide Graphics Port (AGP). The AGP interface provides a highSCSI interface. Both 8-bit (narrow) and 16-bit (wide) bandwidth, low latency connection to system resources,p- which improves the performance of 2D and 3D graphicsported, allowing data rates to reach 40 MB/s. The SCSI applications. The ViRGE/MX uses a 64-bit 2D/3D graphicinterface is based on Adaptec’s industry standard AIC-7880 k-controller. dA PCI based enhanced IDE interface on the LBC8530 performance. The LBC8530 provides base line 66MHzprovides excellent performance with all modern high speed AGP support. It also provides support for various flat pan-IDE drives. It supports 32-bit access, LBA mode support, Diversified Technology offers a complete line of industrial rackmount enclosures, fault tolerant systems, industrial chassis and card cages, single board computers, peripheral interfaces, and more. Diversified Technology provides a one year limited warranty on all products sold. 601-856-4121 U.S.A. - 1-800-443-2667 Fax (601) 856 - 2888 www.dtims.com top graphics controllers which provide full-featured high en engine and is a descendant of the S3 ViRGE family of des devices are supported. Double-speed Ultra operation is su provided. Drivers are available for many of today’s popula Remote-Boot operation for diskless workstations can also b Standard ISA bus peripherals like PS/2 Keyboard/Mous10/100 Base-T connection over a standard UTP-5 data gradever, does not affect its compatibility with other Intel 80X8 tures for critical applications. All these improvements, ho failure. A dedicated serial port is also included allowing thtroller. This allows the LBC8530 to be used on two separatanalysis, and speculative execution. The Pentium II include system monitor providing a timeout in the case of a softwarunique combination of multiple branch prediction, data flo which allows all slots in the backplane to support mastering Monitor for monitoring of system critical variables like vol DuoView™ which can simultaneously display two indepe alpha blending. The LBC8530 contains the industry leadin external devices. This allows an LBC8530 to boot to the O tures are its advanced frame rate control (FRC) for STN pa ported through this interface. Also, fast DMA modes can band SSTN are also supported. Some of its more notable fe Port ISA BufferinFlash DisSystem MonitoPCI/PCI Bridg(MMC-2 EtherneDTI EnhanceDTI’Pentiu Mobil Port Etherne PorSGRA Controlle PS/2 Keyboard Memor Mous66MH Keyboard Interna Flopp PortSCSConnectio Primary ID SeriaParallel PorSecondary IDWide SCSNarro Product Specificatio LBC853