Now Now Supports Supports 512MB 512MB SDRAM SDRAM ePCI-X Half-length Single Board Computer ePX-Sx10 ® ® TM • Intel Pentium III or Celeron Low Power Processor Now Now Supports Supports ® • Intel 815E Chipset with 66/100MHz FSB 512MB 512MB SDRAM SDRAM • Up to 512MB SDRAM • Integrated Video with 4MB Display ® Cache and PanelLink / DVI-I • 10/100 Base-TX Ethernet • Ultra ATA/100 EIDE • AC‘97 2.1 Audio • 2x USB, 4x Serial, and 1x Parallel Ports TM • Optional CompactFlash Disk and PMC Support • Hardware Monitor, RTC and Three-stage WDT • ePCI-X Passive Backplane or Stand-alone Operation Diversified Technology's revolutionary ePX-Sx10 single board computer ushers in the PCI centric industrial com- ® puting era. Compliant with the PICMG 1.2 embedded PCI-X open standard, it offers remarkable application config- urability, a robust feature set, and long production life in a space sensitive, low power 1/2-length card form factor. The ePX-Sx10 system host board (SHB), part of DTI’s ePIX Generation product family, features either a Pentium III or Celeron low power processor, the Intel 815E chipset, and up to 512MB PC100 SDRAM on a single 144-pin SODIMM sock- et. The integrated 2D/3D AGP4X video controller is enhanced with a 4MB display cache and PanelLink transmitter for vivid high performance graphics with digital flat panel or CRT output; the integrated AC’97 2.1 controller and CODEC provide excellent audio quality. The 10 Base-T/100 Base-TX Ethernet and Ultra ATA/100 EIDE controllers support fast data/file trans- fer; two Universal Serial Bus (USB), four serial (two configurable as RS-232/422/485), and one parallel ports, and a floppy interface round out the basic board. Operating in a stand-alone mode, via onboard power connector, or with a standard ePCI-X passive backplane (e.g. DTI's ePB-S5/04) via PCI edge connectors, the ePX-Sx10 supports an optional CompactFlash solid-state disk and 32-bit/33MHz IEEE P1386.1 PMC card. The Ultra Low Voltage 300MHz Celeron processor enables fanless operation. Durable and reli- able, the board is designed to operate in elevated temperatures and meet international medical, measurement, control and laboratory safety and EMC standards. The ePX-Sx10 Phoenix BIOS, in field upgradeable Flash, supports software Ethernet enable/disable, serial/parallel port re- mapping/disable, console redirection, and Wake on LAN. Other features include RTOS validation, a serial ID tag (for unique board identification), hardware monitor (input voltages, temperature, and fan speed), programmable three-stage watchdog timer, battery-backed real time clock, power fail circuit, and a 2 year limited warranty. Highly configurable. Low power. Embedded application robustness. Long production life. Diversified Technology's ePX- Sx10 industrial SBC is the "all PCI - all the time" choice for OEMs addressing medical/laboratory, industrial control and automation (test & measurement, inspection/monitoring), instrumentation, data acquisition, transportation monitoring, gam- ing/in-flight entertainment, COTS defense/aerospace, and "engine" markets. www.epixgeneration.com Rev. 1.3 www.dtims.com • sales@dtims.com • 1.800.443.2667 July 2003 All trademarks and tradenames are the property of their respective owners. ePX-Sx10 ePCI-X Half-length Single Board Computer SPECIFICATIONS CPU / Cache Clock / Calendar Environmental (cont’d) • Low Power Pentium III processor - • Replaceable battery powered real-time clock • Vibration: 1g @ 5-100Hz 400/500/700MHz with 256KB L2 cache, with 256 byte CMOS RAM Storage and Transit BGA2 • Temperature: -40° to +70°C / -40° to 158°F Misc. • Low Power Celeron processor - 300/400MHz • Humidity (RNC): 0 to 95% @ 40°C / 104°F • PS/2 mouse/keyboard (one 6-pin mini-DIN with 128KB L2 cache, BGA2 • Altitude: 15,240m / 50,000ft combo on faceplate, two 4-pin headers) • Intel 815E • Shock: 29.5” free fall • Speaker, reset, keylock, HD activity LED (in approved packaging) Bus Interface (10-pin shrouded) • Vibration: 0.5g @ 5-50Hz, 3g @ 50-500Hz • 66/100MHz FSB; 33MHz PCI Busses • Strobed CPU fan supported (3-pin header) (in approved packaging) • Supports four 32-bit/33MHz slots • Power (10-pin) • Supports 32-bit/33MHz PMC card (5V) • Hardware Monitor - CPU and ambient board Reliability temperature, fan rotation, input voltages • MTBF: >TBD hours @ 50°C / 122°F Memory • (MIL-HDBK_217F) • One 144-pin latching right angle SODIMM BIOS • 2 year limited warranty socket (1" or 1.25" modules) • PCI 2.1 compliant field upgradeable Phoenix • Serial ID Tag • Up to 512MB using 64/128 x 72 3.3V single BIOS, boot from LAN (PXE 2.0) • USB and keyboard/mouse voltage protected or double-sided PC100 SDRAM • PnP 1.0a compliant by self-resetting fuses • Setup console redirection to serial port Data Path (VT100/ANSI mode) with CMOS setup Regulatory Compliance • 64-bit/100MHz on CPU and memory bus access • CE Certification • 32-bit/33MHz on off-board PCI bus • Software enable/disable onboard Ethernet • Safety: UL/cUL 60950; EN/IEC 60950; 32-bit/33MHz on onboard PCI bus • Diskless, keyboardless, and videoless CB Report Scheme CB Certificate and Flash Memory operation extensions; system, video, and Report; IEC601 CISPR11; IEC1010 Part 1 • 1MB Firmware Hub for BIOS field upgrade third party option card ROM shadowing • EMC/EMI: FCC 47 CFR Part 15, Subpart B, • Advanced security features for floppy and Class A; EN55022, EN50081-1/CISPR22; I/O HD; SMBIOS V2.3.1 and HD S.M.A.R.T. EN55024 • USB Ports: two (two 5-pin headers) support • Serial Ports: two RS-232 (16C550) and two Ordering Information • ACPI Rev 1.0b compliant RS232/422/485 with 16 byte FIFO as ePX-S210/300 • Custom BIOS graphical boot COM1-4 with BIOS selectable IRQs and 1/2-length ePCI-X SBC with 300MHz Ultra Low • Thermal Management Voltage Celeron processor addressing, (four male 10-pin shrouded headers) • Parallel Port: one bi-directional with all IEEE ePX-S210/P-300 Supervisory 1/2-length ePCI-X SBC with 300MHz Ultra Low 1284 protocols supported and BIOS • Three-stage programmable watchdog timer Voltage Celeron processor and PMC connector selectable IRQs and addressing, (male 26-pin drives Interrupt on 1st stage, NMI on 2nd ePX-S310/700 shrouded header) stage, system reset on 3rd stage 1/2-length ePCI-X SBC with 700MHz Pentium III • Floppy Disk: support for two drives (360 KB • Hardware system monitor (voltages, CPU, processor to 2.88 MB), (male 34-pin shrouded header) and board temperature, fan speed) ePX-S310/P-700 • EIDE: PCI Ultra ATA/100, support for two OS Compatibility 1/2-length ePCI-X SBC with 700MHz Pentium III drives (master/slave configuration); PIO TM ® • Standard: MS-DOS ; Windows 95/98 processor and PMC connector Mode 4, Bus Master IDE or DMA mode 5 ® ® Likewise other CPU speeds 2000/XP/ME/NT 4.0/5.0; VxWorks ; QNX ; transfers up to 100 MB/s, (one male 40-pin TM ® Options MontaVista /Red Hat Linux shrouded header) ® TM CPU Fan • Optional: UnixWare 2.1.1/7.1.1; Solaris • Optional CompactFlash: one type I/II, CompactFlash disk carrier & media Secondary Master (50-pin back-side header) Mechanical PC100 SODIMM • Ethernet: PCI 10 Base-T/100 Base-TX • 7.52 in. x 4.80 in. x 1.55 in. at CPU/fan Cables VxWorks BSP (Intel 82562ET), (one shielded RJ-45 on face (191 mm x 122 mm x 40 mm) plate w/ link and activity LEDs) • Conforms to IEEE P996 PC/AT bus, PCI See also ePB-S5/04 backplane and ePN-705S node • Optional PMC: one 32-bit/33MHz IEEE Rev. 2.2/ 2.2 PCI-X Addendum, & PICMG chassis P1386.1 compliant backside socket Rev. 1.2 standards Video Power Requirements • Integrated 2D/3D SVGA controller with 4MB Max Power Dissipation 70W PC133 display cache & PanelLink transmitter ICC typ. * +5V 3A (female 29-pin DVI-I on face plate, back-light +3.3V 1.8A header) +12V .95A • Supports digital flat panels and CRTs with -12V .25A All products are shipped FOB factory (MS). Specifications subject to change without notice. Trademarks are the property resolution up to 800 x 600, 16.8M colors; VRM 8.4 module for processor Vcore. of their respective owners. 1024 x 768, 64K colors; or 1280 x 1024, 256 * TBD colors, non-interlaced (C) Copyright 2003 by Diversified Technology. Environmental All rights reserved. Audio Operating • AC’97 2.1 controller and CODEC • Temperature: 0° to 65°C / 32° to 149°F (8-pin header with line in, line out and mic) • Humidity (RNC): 5 to 95% @ 40°C / 104°F • Shock: 30g 18ms www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39158