CPB4712 CompactPCI Processor Blade Product Features Form Factor ® PICMG 2.16 PSB System/Peripheral Processor Blade CPU/Cache ® ® Dual-Core Intel Xeon LV processor with max speeds of 2.0GHz and 2MB L2 cache Bus Interface ® • Intel 3100 Chipset • 667MHz Front Side Bus; 32-bit/33MHz CompactPCI Bus interface Memory • Two DDR2-400 SO-DIMM sockets Diversified Technology's CPB4712 PICMG 2.16-compliant packet switched • 512MB to 4GB of total DDR2 memory backplane (PSB) processor blade combines high performance with low power for telecom and Internet IP-based applications. I/O • Two 100/1000 Ethernet Interfaces on The CPB4712 features the low voltage (LV) high performance Dual-Core 2.16 Switched Fabric ® Intel Xeon processors at speeds ranging from 1.67GHz up to 2.0GHz with • 10/100/1000 Ethernet Interface on Front Panel ® 2MB L2 cache. The CPB4712 is based on the Intel 3100 chipset with • Serial ATA 667MHz front side bus. System memory of up to 4GB is supported via two • 1 PMC/XMC Site DDR2-400 SO-DIMMs. Onboard are dual 100/1000Mbps Ethernet ports • 2 High Speed USB Ports routed according to PICMG 2.16, one 10/100/1000Mbps Ethernet port • Serial Port available at the front panel, one PMC/XMC site (64-bit/133MHz and x4 PCIe), High Speed USB, and a serial port. The CPB4712 also includes a BIOS two-stage watchdog timer for enhanced system reliability. AMI BIOS The CPB4712 has a PCI bridge to the backplane and can therefore operate Physical Dimensions: ® in any slot of a PICMG 2.16-compliant Packet Switched Backplane (PSB). 9.2” x 6.3” x 0.8” ® PICMG 2.9 system management is also supported via a satellite management controller. OS Support ® ® Windows Vista, Windows XP with SP2, ® Part of DTI's PlexSys family of PSB products, the CPB4712 was validated in Red Hat Linux , Solaris DTI's PlexSys-4, 4U general purpose, carrier grade computing platform with CSB4240 Ethernet level 2/3 switch. The IPMI 1.5-compliant Baseboard Warranty Management Controller (BMC), when used with a chassis management Parts and labor covered for 2 years module, supports a comprehensive, protected lights-out management scheme. The CPB4712 system/peripheral processor blade is a cost effective choice for application developers addressing high performance, converging Telecom and Internet IP-based markets such as VPN switches, media gateways, 2.5G/3G wireless, server clusters, IP DSLAM and voice/video/data servers. www.dtims.com/cpci • sales@dtims.com • 1.800.443.2667 Rev 1.9 • 10-27-2011 All trademarks and tradenames are the property of their respective owners. QR Code - Scan to Link CPB4712 CompactPCI Processor Blade CPU / Cache BIOS cont’d ® ® • Dual-Core Intel Xeon LV processor (1.67GHz or 2.0GHz) • Pop-up Boot Menu • 32KB internal L1 cache; 2MB 64-bit on-die L2 Cache • PXE 2.1 Boot Rom Bus Interface Management ® • Intel 3100 Chipset • Integrated IPMI compliant satellite management controller • 667MHz Front Side Bus; 32-bit/33MHz CompactPCI Bus interface • Communicates with system management BMC or host processor • 5V/3.3V CompactPCI signaling as host • Compliant with PICMG 2.9 • Supports one onboard 64-bit/133MHz 3.3V PMC card Mechanical • Supports one onboard x4 PCIe XMC card • 9.2 in. x 6.3 in. 0.8 in. (233.35 mm x 160 mm x 20.32 mm) Memory • 6U x 4HP • Two DDR2-400 SO-DIMM sockets • Conforms to PICMG 2.0 R3.0 (Core), 2.9 (Management) • Memory must be registered and ECC-capable for integrity 2.12 (SW interoperability), 2.15 (PTMC) and 2.16 R1.0 (PSB) specifications • 512MB to 4GB of total memory Power Requirements • PC2-3200, PC2-4200, or PC2-5300 Memory at 400MHz Input Power Rails: +12V, +5V, +3.3V Data Path With CPB4712, CRT4712, and 1GB memory • 64-bit/667MHz on CPU and memory bus 1.67GHz or 2.0GHz • 32-bit/33MHz on off-board CompactPCI bus Max Power Dissipation 54.9 W • 64-bit/133MHz on onboard PCI bus ICC typical +12V N/A • x4 PCIe +5.0V 5.65 A Flash Memory +3.3V 4.79 A • 1MB Flash for BIOS Environmental • USB Flash Disk (UDISK) Operating (designed to meet) Ethernet • Temperature: 0° to 50°C full speed, up to 65°C with speed throttling • Two 100/1000 Ethernet Interfaces on 2.16 Switched Fabric • Humidity (RNC): up to 98% • One 10/100/1000 Ethernet Interface on faceplate • Altitude: 13,000ft @ 34°C / 25,000ft @ 25°C • Vibration: 5-100Hz @1g Peripherals and I/O Interface • Shock: 10g half-sine shock for 11ms, 3 in each direction • 2.5" SATA HDD drive mounted on RTM • 64-bit/133MHz PMC site Storage and Transit (in approved packaging) • x4 PCIe XMC • Temperature: -40°C to 70°C • Hardware Monitor • Altitude: 15240m / 50,000ft • Shock: 40” free fall, I/O Interface Front Panel Rear Panel 20g half-sine shock for 6ms, 100 in each direction COM 1 RJ-45 N/A • Vibration: 30 min, random 5-20Hz @ 1m2/s3; 20-200Hz with -3dB USB #1 USB Connector N/A USB #2 USB Connector N/A Reliability and Serviceability 100/1000 ENET N/A J3 • MTBF: 251,306 hours @ 25°C 10/100/1000 ENET RJ-45 N/A (performed using Issue 6, Method I, Case 3 of the Bellcore IR Program) Serial ATA N/A J3 • 2 year limited warranty PCIe N/A J3 Regulatory Compliance Video Via PMC Via PCIe • Designed for NEBS/ETSI Compliance USB #3 N/A J3 • Designed for CE Certification USB #4 N/A J3 • UL/cUL 60950-1; EN/IEC 60950-1 Note: Rear Panel I/O accessible with DTI’s CRT4712 and CRT4712E • EMI/EMC: FCC 47 CFR Part 15 Class B; EN 55024:1998, EN 61000-3-2, Clock / Calendar EN 61000-3-3, EN 55022:1998, CISPR22:1997, AS/NZS3548:1995 Real-time clock with battery backup CMOS RAM Ordering Information Supervisory CPB4712/1670 * Two-stage programmable watchdog timer drives interrupt on 1st stage and CPB4712 Processor Blade with 1.67GHz Low Voltage (LV) hardware reset on 2nd stage ® ® Intel Xeon Processor and 2MB L2 cache Interoperability CPB4712/2000 * • Validated to operate in a PICMG 2.16-compliant system platforms CPB4712 Processor Blade with 2.0GHz Low Voltage (LV) • 3rd party PSB products ® ® Intel Xeon Processor and 2MB L2 cache OS Compatibility * Indicates long life-cycle support ® ® ® Windows Vista, Windows XP with SP2, Red Hat Linux , Solaris Options BIOS DDR2 400 Memory Capacity (512MB, 1GB, 2GB) • AMI BIOS CRT4712 or CRT4712E Rear Transition Module USB Flash Disk Capacity (128MB, 1GB, 4GB) • PCI 2.2 PMC Integration • ACPI 1.0b and 2.0 XMC Integration • SMBIOS 2.3.1 • PnP 1.0a • Serial console redirection • Multi-boot Support (Floppy, HD, CD, USB, Network) • Legacy USB Support • S.M.A.R.T. Support All products are shipped FOB factory (MS). Specifications subject to change without notice. Trademarks are the property of their respective owners. (C) Copyright 2008-2011 by Diversified Technology, Inc. All rights reserved. www.dtims.com/cpci 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39157