Datasheet Station Interface Boards ® Dialogic Station Interface Boards ® Dialogic Station Interface Boards can be used in open-architecture platforms that integrate large-scale switching and voice processing resources under a single hardware and software architecture. This High-Density Station Interface (HDSI) solution is offered in PCI conŢguration, which provides the industry’s highest density analog station connectivity in a single computer chassis slot. Products Discussed in This Datasheet ® ® • Dialogic HDSI/480 Station Interface Board • Dialogic HDSI/960 Station Interface Board ® ® • Dialogic HDSI/1200 Station Interface Board • Dialogic HDSI/720 Station Interface Board The HDSI Boards consists of a PCI board with H.100 compliant CT Bus connectivity connected to a Station Interface ® Box (SIB). The CT Bus provides switching between trunks and stations and also allows expansion for additional Dialogic network and resource boards. Utilizing just one computer chassis slot, this HDSI solution can support up to 120 stations with tone detection and generation, and FSK Caller ID transmission. Each HDSI Station Interface Board connects an application-selectable time slot on the CT Bus to an analog station device. The RJ-21X telephone interface on the SIB enables easy connections to breakout boxes or punchdown blocks. For standard RJ-11 jack connections, Dialogic offers an optional SA/240 station adapter and a 50-pin cable. Features Benefits Programmable ringing with automatic ring trip Requires no additional external circuitry for 20 Hz, 25 Hz, 30 Hz, and 50 Hz ring frequencies Station status event detection Allows collection of call trafŢc statistics via the application for cost-effective management of call setup and call termination Programmable gain Provides station volume control from the application and enables matching line levels from different devices Onboard FSK generation Allows the transmission of Caller ID to CLASS, CLIP, and J- CLIP-type Caller ID phones, as well as the ability to activate and deactivate message waiting indicators Onboard DTMF detection Recognizes tones generated by phones connected to the stations ® Datasheet Dialogic Switching Boards Technical Specifications HDSI Board Interfaces 4 (connects to one SIB) Maximum boards per system 8 (application, call traffic, and CPU dependent) Control processor Up to 8 MB local to control processor Digital signal processor Motorola 5630x, 1 K word program cache DSP memory Up to 15 DSPs @ 100 MIPS each — 256 K word DRAM local to each DSP — 128 K word SRAM local to each DSP Baseboard global memory 32-bit wide DRAM accessible to all signal processors and control processor ® Supported operating systems Windows ; Linux. Details at http://www.dialogic.com/systemreleases CSP No Signaling Analog loop start Host Interface Host interior memory 512 KBr Bus compatibility Rev 2.1 of PCI Bus Specification Bus mode Target and DMS master mode operation SIB connectors 4 RJ-48C on rear bracket Computer telephony bus ECTF H.100 compliant CT Bus, offering — Onboard switching access to 4096 bidirectional 64 kb/s DS0 time slots — SCbus interoperability through provided adapter — 68-pin ribbon cable connector Platform Form factor PCI long card, single-slot width 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector Power Requirements +5 VDC 3.85 A (maximum) +12 VDC 30 mA (maximum) 2 ® Dialogic Switching Boards Datasheet Technical Specifications (cont.) Environmental Operating temperature +32°F (0°C) to +122°F (+50°C) Cooling condition per maximum operating temperature 5 CFM Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC CertiŢcations Canada ICES-003 Class A ULc CSA 950 Listed File E96804 Europe EN60950 EN55022 EN55024 Japan VCCI Class A United States FCC Part 15 Class A UL 1950 UL Listed File E96804 International IEC950 CISPR 22 CISPR 24 Telecom Approvals United States EBZUSA-33951-CE-T Canada IC:885 10020 X Country-specific approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telcordia Method HDSI/480: 38,500 hours HDSI/720: 34,000 hours HDSI/960: 30,000 hours HDSI/1200: 27,000 hours Warranty Warranty information at http://www.dialogic.com/warranties 3 ® Datasheet Dialogic Switching Boards Technical Specifications (cont.) Station Interface Box (SIB) Programmable Tone Parameters Frequency 300 Hz to 3400 Hz, 31.25 Hz increments Level –10 dBm0 to –40 dBm0, 3 dB increments Duration 10 ms to 4 s, 10 ms increments Interval between 2 s to 17 min (tariff tone only) Station Interface Connectors RJ-21X female for connecting to SA-240 Station Adapter Signaling type Loop start originate Telephone set connection Two-wire loop start, balanced Loop current 20 mA +3 mA Default D-to-A signal level gain –3 dB adjustable; ±6 dB in 1 dB steps (to telephone line, approximately) Default A-to-D signal level gain –3 dB Impedance 600 Ohms ±7% 2-wire return lost 25.0 dB typical Receive signal/noise ratio 36 dB + 3 dB (–1 dBm, 1004 Hz) Noise-to-ground 32 dBrnc +3 dB Idle channel noise 15 dBrnc +3 dB Channel-to-channel crosstalk –70 dB max. (0 dBm, 1004 Hz) Open loop voltage –20 VDC +1.5 VDC (with –24 volt supply) Closed loop current –20 mA ±3 mA Clock rate Expansion: 2.048 Mbs or 1.544 Mbs Independent: 1.544 Mbs PCM algorithm A-law or µ-law, software selectable Ring voltage 54 Vrms @ 20 Hz, (balanced) Ringer Equivalency Number (REN) 2 REN max. per station Telephone ring frequency 20 Hz, 25 Hz, 30 Hz, 50 Hz Loop length 5280 ft (1 mi/1.609 km), typical (24 gauge) ® Dialogic Analog Station Interface Usage WARNING ® This Dialogic analog station interface product is designed to support analog station equipment only within the walls of a single standalone building or structure (i.e., on-premise). It is not designed to sustain electrical overstress from external sources and factors such as severe weather conditions. Electrical overstress can be introduced on cables extending outside of the walls of a single standalone building or structure (i.e., off-premise) such as in a campus environment or other multibuilding facility. Severe electrical overstress caused by misuse of this interface product with cables extending outside of the walls of a single standalone building or structure could cause property damage and/or personal injury and/or death. Such misuse voids the warranty for this interface product. SIB Power Requirements 100 V – 120 V 3.0 A maximum 200 V – 250 V 1.5 A maximum 50/60 Hz SIB Interface Cable Type Standard shielded, RJ-48 male Length 6 ft (1.828 m) provided Maximum distance the SIB can be from the HDSI/PCI is 660 ft (201.168 m) 4 ® Dialogic Switching Boards Datasheet Technical Specifications (cont.) SA-240 Station Adapter Kit ® Dialogic Station Interface Boards use the SA-240 station adapter kit. The SA-240 station adapter kit ISA version includes a cable assembly and an RJ-11 breakout box. The cable has two RJ-21X connectors: one male and one female. The breakout box converts the RJ-21X connectors into 24 standard RJ-11 connectors for easy connection to standard telephone sets. The same SA-240 breakout box is used for ® both ISA and PCI products. The SA-240 can be wall-mounted. If RJ-11 connections are desired, Ţve SA-240 kits are needed for one Dialogic HDSI/1200 Station Interface Board. Telephone set connection RJ-11 standard connectors Number of RJ-11 connectors 24 Front panel connector RJ-21X jack Dimensions Length 6.0 in. (15.4 cm) Width 3.8 in. (9.7 cm) Height 1.25 in. (3.2 cm) excluding RJ-21X connector 1.50 in. (3.8 cm) including RJ-21X connector Weight 24 oz. (.68 kg) Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing Cable Length Approx. 4.0 ft (1.2 m) Connectors RJ-21X, 50-pin male to HDSI/SC board RJ-21X, 50-pin female standard USOC to breakout box The HDSI system is provided in four station densities: • HDSI/480 (the base model) supports 48 stations • HDSI/720 supports 72 stations • HDSI/960 supports 96 stations • HDSI/1200 supports 120 stations Model Stations Interface Form Factor SIB Resource Bus OS Support ® HDSI/480 48 RJ-21X, RJ-11 PCI 2U-19 in. CT Bus, SCbus Windows NT, ® Windows 2000, Linux ® HDSI/720 72 RJ-21X, RJ-11 PCI 2U-19 in. CT Bus, SCbus Windows NT, ® Windows 2000, Linux ® HDSI/960 96 RJ-21X, RJ-11 PCI 2U-19 in. CT Bus, SCbus Windows NT, ® Windows 2000, Linux ® HDSI/1200 120 RJ-21X, RJ-11 PCI 2U-19 in. CT Bus, SCbus Windows NT, ® Windows 2000, Linux ** With optional SA/240 Station Adapter and 50-pin cable The SIB has an internal power supply that provides loop current (battery) and ring voltage to local telephony devices. The system can handle multiple stations going on- or off-hook and ringing simultaneously. All HDSI models are capable of providing the AC voltage needed to ring standard 2500-type telephones and some other phones. The ring capability is contained within the SIB. The HDSI board defaults to a 33-percent duty cycle ring cadence and can ring 120 phones simultaneously. Balanced lines ensure low noise and allow stations to be installed up to 5280 ft (1 mi/1.609 km) from the SIB. Built-in Electrostatic Discharge (ESD) protection lets agents insert and remove headset jacks without damaging HDSI board circuits. Application-programmable channel gain controls the volume for each channel and matches line impedances from country-speciŢc telephone sets and devices. Station status event detection collects call trafŢc statistics and enables cost-effective management of call setup/call termination. 5 Optional Components • SA-240 station adapter kit for HDSI • The following kit components can be ordered separately: — RJ-21X cable for SIB — RJ-21X to RJ-11 breakout box Ordering Information Product Code Order Code Description HDSI1200PCIW 884-313 120-port Analog Station, PCI HDSI960PCIW 884-315 96-port Analog Station, PCI HDSI720PCIW 884-314 72-port Analog Station, PCI HDSI480PCIW 884-312 48-port Analog Station, PCI To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC® PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic Corporation. Dialogic's trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic's trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Copyright © 2007 Dialogic Corporation All rights reserved. 10/07 7115-08 www.dialogic.com