® Datasheet Dialogic DSI Signaling Interface Unit Based ® on Dialogic DSI SS7G3x Signaling Servers ® The Dialogic DSI Signaling Interface Unit (DSI SIU) is based ® ® on the Dialogic DSI SS7G31 Signaling Server or Dialogic DSI SS7G32 Signaling Server, which are known collectively as the ® Dialogic DSI SS7G3x Signaling Servers. The DSI SIU offers signaling connectivity for distributed, multi- system-based telecom applications by providing Time Division Multiplex (TDM) interfaces and Internet Protocol (IP) transport to application host servers. This architecture offloads the signal processing from the application servers and allows the load sharing of application processes over 1 to 128 separate systems. The DSI SIU is suitable for a wide variety of solutions, notably those in which high throughput for signaling traffic is required. Large Logo It offers developers an integrated standards-based signaling platform, provides carrier-grade fault resiliency and scalability, and supports a wide range of signaling protocols, including specific local variants, enabling worldwide deployment in a variety of applications. The DSI SIU provides access to all layers of the DSI SS7 stack for circuit and transaction related services. Programs running on ® the application host use the DSI protocol layers as though they were resident locally, while a Dialogic driver provided with the DSI SIU software sends and receives messages over IP to and from the DSI SIU. This architecture facilitates scaling the service node without replicating the network-facing connections with additional hardware, protocol licenses, or point codes. The DSI SIU supports standard operations, administration, and maintenance (OA&M) interfaces via Simple Network Management Protocol (SNMP), allowing easy integration into automated, centralized management systems. Medium Logo To find out more about Dialogic call 800.755.4444 or visit us at: www.dialogic.com Small Logo ® Datasheet Dialogic DSI Signaling Interface Unit Based ® on Dialogic DSI SS7G3x Signaling Servers Features Benefits Accommodates high link density and performance; supports Enables the creation of powerful, scalable, cost-effective, up to: high-density solutions to address the needs of demanding •   192 (DSI SS7G32) or 64 (DSI SS7G31) low-speed, channel- mobile and intelligent networking transaction-intensive ized 64 Kbps SS7 links in 64 link sets applications •   4 high-speed, 2 Mbps Q.703 SS7 links configurable on a  per-link basis •   256 M2PA or 256 M3UA associations •  128 application hosts served over IP •   64,000 ISUP circuits or 64,000 simultaneous TCAP, INAP,  MAP, or ANSI-41 transactions per server •   12,000 transactions per second or 12,000 calls per second  per server ® Common API across Dialogic  Distributed Signaling Interface  Can reduce development costs by allowing easy migration of (DSI) Components – boards, stacks, and servers applications to higher performance server platforms Supports ITU-T, 3GPP, and local variants of SS7 protocols,  Facilitates reliable, global deployment via protocols that are including MTP, ISUP, BICC, SCCP, TCAP, MAP, ANSI-41, INAP,  used in many networks worldwide and CAMEL Supports operation using IETF SIGTRAN M2PA or M3UA in  Can be deployed in a SIGTRAN network without the need Application Server Process and peer-to-peer IP Server Process  for TDM interface hardware or separate signaling gateways (IPSP) configurations Supports resilient system architectures and multiple point  Enables fault-resilient system architectures with redundant codes systems and standby IP ports for single or multiple networks Equipped with redundant hard drives Provides data and system resiliency to maintain application uptime Distributed Transaction Execution When used with TCAP and other transaction based protocols, the DSI SIU acts as a central message server for one or more separate systems running the same or different applications. Incoming traffic to a point code can be initially routed to the application systems on an SCCP Subsystem Number (SSN), with subsequent exchanges routed via the TCAP transaction ID. The execution of protocol layers from TCAP to MAP/ANSI-41 or INAP can be distributed among the host systems or run entirely on the DSI SIU, depending on the performance requirements and resilience objectives of individual deployments. 2 ® Datasheet Dialogic DSI Signaling Interface Unit Based ® on Dialogic DSI SS7G3x Signaling Servers System Resilience DSI SIUs provide carrier-grade qualities, which are required for service provider applications. One of these qualities is fault resilience, which is illustrated in Figure 1: Application Hosts Ethernet ® Dialogic DSI Signaling Interface Units ® Based on Dialogic DSI SS7G3x Signaling Servers Single Linkset SS7 Links Figure 1 - Fault-Resilient Configuration Example DSI SIUs can be configured in pairs that share the same SS7 point code or as multiple point codes. Both configurations provide resilient operation for the service node. In normal operation, the signaling load can be shared across the two units. If one unit fails, the remaining unit handles all signaling. For SIGTRAN networks, IP resilience can be enhanced by using 10/100/1000 Mbit/s Ethernet interfaces in groups, with an active and standby interface for a given IP address. Optionally, each DSI SS7G3x can be configured with dual power supply units, allowing a hot-swap redundant configuration. ATM Connectivity ® A Dialogic DSI SS7MDL4 Network Interface Board can be field-installed in the DSI SS7G32 Signaling Server. When equipped with a DSI SS7MDL4 Board, the DSI SIU is capable of connecting to networks using either MTP or ATM transport technologies. For more information about using an SIU with an SS7MDL4 Board, including ordering information and processing capabilities, please contact your Dialogic sales representative. 3 ® Datasheet Dialogic DSI Signaling Interface Unit Based ® on Dialogic DSI SS7G3x Signaling Servers Technical Specifications Configurations SS7G31 SS7G32 Form factor 1U 2U ® ® Boards per server (may be configured without 1 Dialogic DSI SPCI4 Network Interface Board 1 to 3 Dialogic DSI SPCI4 Network Interface TDM boards for SIGTRAN-only operation) Boards or or ® 1 Dialogic DSI SS7HDP Network Interface ® Board 1 to 3 Dialogic DSI SS7HDP Network Interface Boards Physical ports per unit T-1/E-1 Up to 4 Up to 12 HSL Q.703 links Up to 2 Up to 6 SS7 links per unit (including M2PA) 64 (256) 192 (256) SS7 linksets per unit 64 64 SIGTRAN M2PA associations 256 256 SIGTRAN M3UA associations 256 256 Remote application servers (IPSP) 256 256 Routes via signaling gateway 256 256 Number of SS7 routes 4096 4096 Number of networks 4 4 10/100/1000 Mbit/sec Ethernet interfaces 4 6 Calls per second over TDM 8,500 12,000* Calls per second over SIGTRAN (M3UA) 9,700 12,000* Transactions per second over TDM using TCAP, 4,000 12,000* MAP, ANSI-41, or INAP Transactions per second over SIGTRAN (M3UA) 12,000* 12,000* using TCAP, MAP, ANSI-41, or INAP Number of hosts supported 128 128 Power AC or DC AC or DC NEBS-3 and ETSI Compliant No With 0 boards, DC power only MTBF (hours) in Dual Power Supply 73,000 33,000 configuration** * In some cases, throughput may exceed these measurements. Contact your Dialogic sales representative if your requirements demand higher call or transaction volumes. ** Mean Time Between Interruptions (MTBI) in hours is based on the assumption that a failed power supply module or hard drive is replaced within 24 hours. MTBF prediction for Telcordia Method @ +104°F (+40°C) 4 ® Datasheet Dialogic DSI Signaling Interface Unit Based ® on Dialogic DSI SS7G3x Signaling Servers Technical Specifications (continued) Interfaces LAN interface SS7G31: 4 x 10/100/1000 MBps Ethernet SS7G32: 6 x 10/100/1000 MBps Ethernet Line interface: PCM Up to 12 interfaces, each software-configurable as either T1 or E1 Pulse mask T1: TIA-968-A, CS-03, and AT&T TR62411 E1: ITU-T G.703 Data rate T1: 1544 kbps ± 50 ppm E1: 2048 kbps ± 50 ppm Frame format T1: D4, ESF, and ESF-CRC6 E1: E1 and E1-CRC4 Line codes HDB3 AMI (ZCS) AMI B8ZS Connector type RJ-45 Power SS7G31 DC-powered products Supply voltage (range nominal) –48 VDC to –60 VDC Input power (fully equipped) 230 W Range limits –38 VDC to –75 VDC AC-powered products Supply voltage (auto ranging) 100 VAC to 127 VAC / 200 VAC to 240 VAC Input power (fully equipped) 230 W Frequency 50 Hz/60 Hz SS7G32 DC-powered products Supply voltage (range nominal) –48 VDC to –60 VDC Input power (fully equipped) 300 W Range limits –38 VDC to –75 VDC AC-powered products Supply voltage (auto ranging) 100 VAC to 127 VAC / 200 VAC to 240 VAC Input power (fully equipped) 300 W Frequency 50 Hz/60 Hz 5 ® Datasheet Dialogic DSI Signaling Interface Unit Based ® on Dialogic DSI SS7G3x Signaling Servers Technical Specifications (continued) Physical Dimensions SS7G31 Height 1.7 in. (4.32 cm) Width 17.11 in. (43.53 cm) Depth 20 in. (50.8 cm) Weight – fully equipped 24.2 lbs (11 kg) SS7G32 Height 3.45 in. (8.76 cm) Width 17.11 in. (43.53 cm) Depth 20 in. (50.8 cm) Weight – fully equipped 40 lbs (18 kg) Environmental SS7G31 Operating temperature +50°F (+10°C) to +95°F (+35°C) Storage temperature –40°F (–40°C) to +158°F (+70°C) SS7G32 Operating temperature +41°F (+5°C) to +104°F (+40°C) Storage temperature –40°F (–40°C) to +158°F (+70°C) Safety and EMC International CB Certificate to IEC 60950-1, EN60950-1 EN 300 386, EN55022, EN55024, CISPR 22 United States UL 60950-1 FCC Part 15 Class A Canada CAN/CSA-C22 No 60951-1 ICES-003 Telecommunications International TBR12, TBR13 United States TIA-968-A Canada CS-03 Hazardous substances RoHS compliance information at www.dialogic.com/rohs Country-specific approvals Gobal product approvals database at www.dialogic.com/declarations Warranty Warranty information at www.dialogic.com/warranties Service plan See Service plan information at www.dialogic.com/products/services 6 ® Datasheet Dialogic DSI Signaling Interface Unit Based ® on Dialogic DSI SS7G3x Signaling Servers Host System Requirements ® Operating systems: Linux, Solaris, Windows Ordering Information ® ® Dialogic DSI SS7G3x Signaling Servers are preconfigured with 0 to 3 low-density (4 link) Dialogic DSI SPCI Network Interface ® Boards or high-density (64 link) Dialogic DSI SS7HDP Network Interface Boards. A server software license from Dialogic is ® required for the Dialogic DSI Signaling Interface Unit. Additional protocol software and accessories may be added. Order Code Model Description Signaling Servers 310-893 SS7G310A0W SS7G31, AC powered, 0 SS7 links, 0 T1/E1 ports 310-897 SS7G31QA1W SS7G31, AC powered, 4 SS7 links, 4 T1/E1 ports 310-895 SS7G31HA1W SS7G31, AC powered, 64 SS7 links, 4 T1/E1 ports 310-894 SS7G310D0W SS7G31, DC powered, 0 SS7 links, 0 T1/E1 ports 310-900 SS7G31QD1W SS7G31, DC powered, 4 SS7 links, 4 T1/E1 ports 310-896 SS7G31HD1W SS7G31, DC powered, 64 SS7 links, 4 T1/E1 ports 310-901 SS7G320A0W SS7G32, AC powered, 0 SS7 links, 0 T1/E1 ports 310-910 SS7G32QA1W SS7G32, AC powered, 4 SS7 links, 4 T1/E1 ports 310-905 SS7G32QA2W SS7G32, AC powered, 8 SS7 links, 8 T1/E1 ports 310-902 SS7G32QA3W SS7G32, AC powered, 12 SS7 links, 12 T1/E1 ports 310-912 SS7G32HA1W SS7G32, AC powered, 64 SS7 links, 4 T1/E1 ports 310-903 SS7G32HA2W SS7G32, AC powered, 128 SS7 links, 8 T1/E1 ports 310-904 SS7G32HA3W SS7G32, AC powered, 192 SS7 links, 12 T1/E1 ports 310-906 SS7G320D0W SS7G32, DC powered, 0 SS7 links, 0 T1/E1 ports 310-909 SS7G32QD1W SS7G32, DC powered, 4 SS7 links, 4 T1/E1 ports 310-899 SS7G32QD2W SS7G32, DC powered, 8 SS7 links, 8 T1/E1 ports 310-907 SS7G32QD3W SS7G32, DC powered, 12 SS7 links, 12 T1/E1 ports 310-911 SS7G32HD1W SS7G32, DC powered, 64 SS7 links, 4 T1/E1 ports 310-908 SS7G32HD2W SS7G32, DC powered, 128 SS7 links, 8 T1/E1 ports 310-898 SS7G32HD3W SS7G32, DC powered, 192 SS7 links, 12 T1/E1 ports Server Software G06-035 SS7SBG30SIUV Signaling Interface Unit license for Signaling Server, 4 MTP links, 128 CICS (ISUP/BICC), SNMP G07-035 SS7SBG30SIUU Signaling Interface Unit license for Signaling Server, 16 MTP links, 4096 CICS (ISUP/BICC), SCCP, SNMP G08-035 SS7SBG30SIUL Signaling Interface Unit license for Signaling Server, 64 MTP links, 65535 CICS (ISUP/BICC), SCCP, SNMP G18-035 SS7SBG30SIUJ Signaling Interface Unit license for Signaling Server, 192 MTP links, 65535 CICS (ISUP/BICC), SCCP, SNMP 7 ® Datasheet Dialogic DSI Signaling Interface Unit Based ® on Dialogic DSI SS7G3x Signaling Servers Ordering Information (continued) Order Code Model Description Protocol Software G19-035 SS7SBG30TCAPL TCAP protocol license for Signaling Server, 65535 simultaneous active dialogs G20-035 SS7SBG30INAPL INAP protocol license for Signaling Server, 65535 simultaneous active dialogs G21-035 SS7SBG30IS41L IS41 protocol license for Signaling Server, 65535 simultaneous active dialogs G14-035 SS7SBG30MAPL MAP protocol license for Signaling Server, 65535 simultaneous active dialogs G05-035 SS7SBG30M2PAS M2PA protocol license for Signaling Server, 16 link eq/assoc G04-035 SS7SBG30M2PAR M2PA protocol license for Signaling Server, 32 link eq/assoc G03-035 SS7SBG30M2PAL M2PA protocol license for Signaling Server, 64 link eq/assoc G02-035 SS7SBG30M2PAK M2PA protocol license for Signaling Server, 128 link eq/assoc G01-035 SS7SBG30M2PAJ M2PA protocol license for Signaling Server, 256 link eq/assoc G13-035 SS7SBG30M3UAS M3UA protocol license for Signaling Server, 16 link eq/assoc G12-035 SS7SBG30M3UAR M3UA protocol license for Signaling Server, 32 link eq/assoc G11-035 SS7SBG30M3UAL M3UA protocol license for Signaling Server, 64 link eq/assoc G10-035 SS7SBG30M3UAK M3UA protocol license for Signaling Server, 128 link eq/assoc G09-035 SS7SBG30M3UAJ M3UA protocol license for Signaling Server, 256 link eq/assoc Accessories 300-388 SS7G31SACPSU SS7G31 450W AC power supply 300-392 SS7G31SDCPSU SS7G31 450W DC power supply 300-387 SS7G31BHDD SS7G31 spare hard drive 300-389 SS7G32SACPSU SS7G32 600W AC power supply 300-391 SS7G32SDCPSU SS7G32 600W DC power supply 300-390 SS7G32BHDD SS7G32 spare hard drive 310-869 SS7G30R19LBR 2-post 19” rack mount “L” bracket kit 310-870 SS7G30R19MNT 2/4-post 19” rack mount 310-871 SS7G30R23MNT 2/4-post 23” rack mount 310-872 SS7G30RSLKIT Enabling kit for use with slide rails ® Note: The DSI SS7G32 provides a form, fit, and function replacement for the Dialogic DSI SS7G2x Signaling Servers. ® ™ ® ™ Optional Dialogic  Pro  Premium Per Unit Plan and Dialogic  Pro  Premium Service Agreement ® Support and service plans are available for the Dialogic DSI SS7G3x Signaling Servers as separately ordered items. 8 Large Logo Medium Logo Small Logo www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th floor Montreal, Quebec CANADA H4M 2V9 Dialogic and Dialogic Pro are registered trademarks or trademarks of Dialogic Corporation. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at the address provided above. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this Datasheet other than what is listed under the section entitled Technical Specifications forms part of the specifications of the product and any benefits specified are not guaranteed. No licenses or warranties of any kind are provided under this product brief. Dialogic may make changes to specifications, product descriptions, and plans at any time, without notice. Any use case(s) shown and/or described herein represent one or more examples of the various ways, scenarios or environments in which Dialogic® products can be used. Such use case(s) are non-limiting and do not represent recommendations of Dialogic as to whether or how to use Dialogic products. Copyright © 2009 Dialogic Corporation All rights reserved. 11/09 11139-02