® ® Datasheet Dialogic Diva Analog Media Boards Diva Media Boards ® ® The Dialogic Diva Analog Media Boards provide two, four, and eight ports and serve as an excellent communication platform, which scales from 2 to 64 channels (phone lines) per single server. This datasheet discusses the following products: ® ® •  Dialogic   Diva UM-Analog-2 Media Board (PCI and PCIe version) ® ® •  Dialogic   Diva UM-Analog-4 Media Board (PCI and PCIe version) ® ® •  Dialogic   Diva UM-Analog-8 Media Board (PCI and PCIe version) ® ® •  Dialogic   Diva Analog-2 Media Board (PCI and PCIe version) ® ® •  Dialogic   Diva Analog-4 Media Board (PCI and PCIe version) ® ® •  Dialogic   Diva Analog-8 Media Board (PCI and PCIe version) The Diva Analog Media Boards offer voice, speech, conferencing, VoIP, modem and fax features, Large Logo and can serve as a base for many communication applications. The boards are supported by most standard applications, and are also suitable for new application development. Diva Analog Media Boards are available in Low Profile, Half Size, or Full Size form factors and are ® ® available in both PCI and PCI Express (PCIe) versions. Diva Analog can be seamlessly combined with other Dialogic Diva Media Boards, such as E1/T1, ISDN PRI/BRI, and VoIP. Because both PCI and PCIe versions share the same feature sets, migration from a PCI server hardware to PCI Express server is easy. PCI and PCIe versions can also be used in the same server. ® ® The Diva Analog Media Boards support the same set of programming interfaces as other Diva Media Boards: the three Dialogic ® Diva APIs, CAPI, TAPI, COM port, WAN Miniport, TTY, Asterisk, and SIP/RTP. Because of consistent interface support, applications written for one Diva Media Board will normally work without modification with Diva Analog Media Boards. Medium Logo To find out more about Dialogic call 800.755.4444 or visit us at: www.dialogic.com Small Logo ® ® Datasheet Dialogic Diva Analog Media Boards Diva Media Boards Features Benefits Onboard CPU with large RAM and powerful FPGA chip for fast Can remove performance bottlenecks by offloading key real- data streaming between the host CPU, the DSPs, the phone time tasks that would ordinarily place an excessive burden line and the other active components onboard on the host server, allowing Quality of Service (for example, voice quality and connection speed) to be more consistent One powerful DSP dedicated to each communications Provides real-time processing of complex operations (such as channel V.90 data modem, V.34 fax receiver and transmitter, voice compression, or echo cancellation) without reducing overall system performance, which lowers implementation costs Sophisticated hardware design Operates with low power consumption Conforms to plug-and-play standards Easy installation and operation Implements most supplementary services and many different Allows application compatibility with major PBXs and can ® ® analog signaling protocols make a system based Dialogic Diva technology ready for worldwide use Pulse and tone dialing Handles enterprise voice, conferencing, fax, and remote access applications via any PBX offering analog trunk interfaces Voice packetization into Real-time Transport Protocol (RTP), Permits legacy voice, speech, and conferencing applications adaptive jitter buffer, voice compression (G.726, GSM), and to be used with VoIP clients and IP phones Comfort Noise Generation (CNG) ® Supports the same programming interfaces as other Dialogic Reduces porting efforts and time to market by making Diva ® ® ® Diva Media Boards: CAPI, TAPI, Dialogic Diva APIs and Media Boards compatible with standard telephony and others communications applications Up to eight Diva Media Boards of the same or different types Easy scalability and flexibility to address an organization’s can operate concurrently in a single server communications needs in changing environments, such as VoIP The Diva UM-Analog-2, UM-Analog-4, and UM-Analog-8 Media Boards support fax transmissions on half (50%) of their available channels. The feature set of the Diva Media Boards in the UM series has been designed to meet the needs of typical Unified Messaging applications. The Diva Analog-2, Analog-4, and Analog-8 boards support V.34 fax transmissions on all available channels. The Diva Analog-2, Analog-4 and Analog-8 boards are normally referred to as part of the Universal series. 2 ® ® Datasheet Dialogic Diva Analog Media Boards Diva Media Boards Technical Specifications Quick Reference Voice resources 2, 4, or 8 Fax resources 2, 4, or 8 (Universal-Series) and 1, 2 or 4 (UM-Series) Conferencing resources 2, 4, or 8 Maximum boards/system 8 (tested by Dialogic); more than 8 are possible — depends on the application CSP Yes Form factor Low Profile: 2-port PCI/PCIe; Half Size: 4/8-port PCIe; Full Size: 4/8-port PCI Resource bus PCI rev 2.2 up to 66 MHz or PCI Express 1.0a x1 lane (3.3/12 V) Connection 2, 4, or 8 RJ-11/14 connectors Network interface Analog Signaling Loopstart ® Operating system Windows and Linux. Details at http://www.dialogic.com/systemreleases Volts PCI: 5; PCI Express: 3.3 and 12 Required accessories None Hardware •  32-bit RISC CPU, 100 MHz, 131 MIPS •  2, 4 or 8 DSPs (32.76 MHz and 65 MIPS) •  16 MB onboard SDRAM Memory  •  Telephony interface: — 2 x RJ-10 (2-port), RJ-10/RJ-11 cables supplied — 4 x RJ-10 (4-port), RJ-10/RJ-11 cables supplied — 4 x RJ-45 (8-port), RJ-10/RJ-11 cables and RJ-45/RJ-10 adapters supplied — POTS trunk interface — Loopstart signaling •  Physical dimensions: — 2-port PCI: 167.65 mm x 64.41 mm (PCB) — 2-port PCIe: 167.65 mm x 68.90 mm (PCB) — 2-port PCI/PCIe: 180.96 mm x 120.88 mm (with standard bracket) — 2-port PCI/PCIe: 180.96 mm x 80.06 mm (with low profile bracket) — 4/8-port PCIe: 167.65 mm x 111.15 mm (PCB) — 4/8-port PCIe: 180.96 mm x 126.31 mm (with bracket) — 4/8-port PCI: 312.00 mm x 106.68 mm (PCB) — 4/8-port PCI: 325.310 mm x 126.37 mm (with bracket) — 4/8-port PCI: 352.17 mm x 126.37 mm (with bracket and retainer) •  I/O addresses, memory and interrupt allocated automatically •  Plug-and-play interface •   PCI: PCI 2.2, up to 66 MHz, 32 bit (also supports 64 bit dual address cycle DMA), 5 V supply required, 3.3 V, or 5 V universal signaling, supported in  backwards compatible PCI-X slots •  Production quality: ISO 9002 3 ® ® Datasheet Dialogic Diva Analog Media Boards Diva Media Boards Technical Specifications (continued) Power Consumption and Environmental •  Power consumption:  — 2-port PCI: 0.34A @ +5 V (typical) — 2-port PCIe: 0.26A @ +3.3 V and 0.16A @ 12 V (typical) — 4-port PCI: 0.45A @ +5 V (typical) — 4-port PCIe: 0.26A @ +3.3 V and 0.18A @ 12 V (typical) — 8-port PCI: 0.5A @ +5 V (typical) — 8-port PCIe: 0.34A @ +3.3 V and 0.22A @ 12 V (typical) •  Operating temperature: 10°C to 50°C  •  Storage temperature: 0°C to 70°C •  Maximum tolerance in voltage fluctuation: According to the respective PCI or PCI Express specification ® ® ® ® ® ® ™ Dialogic Diva System Release Software, Dialogic Diva SDK Software and Dialogic Diva SIPcontrol Software ® •  Supported operating systems: Windows and Linux. Details at http://www.dialogic.com/systemreleases •  M-adapter feature (patent pending): Combined Virtual Adapter, Internal Call Transfer, Explicit Call Transfer Emulation •  SNMP support: ® — Windows : v2c — Linux: Net-SNMP v1, v2c and v3 •  Application interfaces (provided by Dialogic Diva System Release Software and Dialogic Diva SDK): ® — Microsoft : Diva API, Diva API for .NET, Diva Component API (VB.NET), COM Port, WAN Miniport, TAPI, CAPI 2.0, extended CAPI, VoIP (SIP/RTP) —Linux: Diva API, TTY, CAPI 2.0, extended CAPI, VoIP (SIP/RTP) •   Dialogic Diva SIPcontrol Software: VoIP and FoIP (T.38) Gateway Software. For up to 2 channels per system, the licenses are free of charge. If more  than 2 channels are required, licenses can be ordered from Dialogic. Diva SIPcontrol Software can be downloaded from http://www.dialogic.com. Features - Signaling •  Pulse dialing  •  Analog caller identification (via FSK and DTMF signaling) •  Tone (DTMF/MF) dialing •  Hold/retrieve (via hookflash) •  Collection of post dial DTMF digits •  Call progress analysis: — Busy tone detection — Ring back tone detection — Special Information Tone (SIT) detection — Fax/modem detection — Dial tone detection 4 ® ® Datasheet Dialogic Diva Analog Media Boards Diva Media Boards Technical Specifications (continued) Features – Media Processing •  Voice and speech: — G.711 coding (A-law, µ-law selectable)  — DTMF detection, generation, clamping and filtering — Generic tone detection and generation — Pulse tone detection — Full-duplex voice, barge-in — Voice Activity Detection (VAD) — Silence detection — Human talker detection — Recording Automatic Gain Control (AGC)  — Pitch control — Audio tap — G.168 echo cancellation, up to 128 ms tail length •  Voice over IP (VoIP): — G.711 voice coder (64 kbps, µ-law, A-law)  — G.726 voice coder (32 kbps) — G.729 voice coder (VoIP licenses required) — GSM voice coder (13 kbps) — Adaptive jitter buffer — Voice Activity Detection (VAD) — Comfort Noise Generation (CNG) — Real-time Transport Protocol (RTP) framing — G.168 echo cancellation, up to 128 ms tail length •  Switching and conferencing: — Onboard and cross-board switching and (large) conferencing via line interconnect (call tromboning) — Automatic Gain Control (AGC) •  Support for Fax Class 1 and 2 •  Support for Fax Group 3, T.30: — V.17, V.29, V.27ter, V.21, V.34 modulation  — Fax polling/ fax on demand — Up to 33.6 kbps with each channel (send and receive) — Page formats: ISO A4, B4, A3 — Fax compression MH, MR, MMR — Error Correction Mode (ECM) — Standard, fine, super-fine and ultra-fine resolution — Color fax (JPEG-format) •  Support for FoIP, T.38 (when using Diva SIPcontrol Software): — Up to 33.6 kbps with each channel (send and receive) •  Data modem (Remote Access, POS and other Low Bit Rate (LBR) applications): — V.21, V.22, V.22bis, Bell 103, Bell 212A, V.32, V.32bis, V.34, V.42, V.42bis, V.90, MNP4, MNP5 — Modem with extension: V.18, V.21, Bell 103, V.23, EDT, Baudot45/47/50 incl. DTMF, V.42, V.42bis 5 ® ® Datasheet Dialogic Diva Analog Media Boards Diva Media Boards Technical Specifications (continued) Safety and EMC Canada: ICES-003 Class B, CSA 60950-1 Europe: EN60950-1, EN55022, EN55024 United States: FCC Part 15 Class B, UL60950-1 Telecommunications United States: TIA-968 Canada: CS03 Approvals, Compliance, and Warranty Hazardous substances: RoHS compliance information at http://www.dialogic.com/rohs Country-specific approvals: Global product approvals at http://www.dialogic.com/declarations Warranty: Warranty information at http://www.dialogic.com/warranties Ordering Information ® ® Dialogic Diva Product Order Code Analog-2 PCI (with additional LP bracket) 306-302 Analog-2 PCIe (with additional LP bracket) 306-386 UM-Analog-2 PCI (with additional LP bracket) 306-385 UM-Analog-2 PCIe (with additional LP bracket) 306-387 Analog-4 PCI 306-232 Analog-4 PCI China 306-260 Analog-4 PCIe 306-389 UM-Analog-4 PCI 306-384 UM-Analog-4 PCIe 306-388 Analog-8 PCI 306-233 Analog-8 PCI China 306-259 Analog-8 PCIe 306-395 UM-Analog-8 PCI 306-383 UM-Analog-8 PCIe 306-390 Diva G.729 2 CH SW License* G01-029 Diva G.729 4 CH SW License* G02-029 Diva G.729 8 CH SW License* G03-029 * To be used when VoIP applications like Diva SIPcontrol Software need to support the G.729 coder. 6 Large Logo Medium Logo Small Logo www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th floor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF THE DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic, Diva and SIPcontrol are either registered trademarks or trademarks of Dialogic Corporation or its subsidiaries. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at the address listed above. Any authorized use of Dialogic’s trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time, and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. None of the information provided in this datasheet other than what is listed under the section entitled Technical Specifications forms part of the specifications of the product and any benefits specified are not guaranteed. Dialogic may make changes to specifications, product descriptions, and plans at any time, without notice. This document discusses one or more open source products, systems and/or releases. Dialogic is not responsible for your decision to use open source in connection with Dialogic products (including without limitation those referred to herein), nor is Dialogic responsible for any present or future effects such usage might have, including without limitation effects on your products, your business, or your intellectual property rights. Copyright © 2008 Dialogic Corporation All rights reserved. 10/08 11236-01