Datasheet Station Interface Boards ® Dialogic Station Interface Boards ® Dialogic Station Interface Boards are next-generation building blocks for converged communications systems. These boards are single-slot PCI or PCI Express solutions that connect analog telephone devices directly to converged communications platforms to create affordable, small- to mid-size, server-based Private Branch Exchanges (PBXs), telemarketing systems, and call centers. These products are highly reliable and cost effective, offering an optimized mix of analog station interfaces and resources on which to build highly scalable systems. Products Discussed in This Datasheet ® ® • Dialogic DI/SI32 Switching Board • Dialogic DI/SI16 Switching Board ® • Dialogic DI/SI24 Switching Board DI/SI16, DI/SI24, and DI/SI32 are full-size, single-slot PCI or PCI Express boards, which are based on DM3 architecture. They provide connectivity for up to 16, 24, or 32 station interfaces and include conferencing, voice play/record, tone detection and generation, and Caller ID capabilities. DM3 architecture allows access to independent, high-performance, Ţrmware-based network protocol and media processing resources that can be operated and integrated on compatible hardware platforms. Features Benefits Single-slot PCI solution Can connect up to 32 analog telephone devices directly to converged communications platforms Conferencing resources Supports up to 16 conferees in ţexible conŢgurations of 2 to 16 parties per conference Enhanced conferencing features Includes coach-pupil mode, volume controls, and active-talker identiŢcation Frequency Shift Keying (FSK) station signaling Enables Caller ID delivery and message-waiting-indicator control Off-hook FSK signaling Allows messaging implementations to Caller ID Type 2 devices, such as Caller ID or Call Waiting Separate models available with Universal PCI or PCI Express Universal PCI form factor compatible with 3.3 V and 5.0 V bus edge connector signals enabling deployment in a wide variety of PCI chassis from popular manufacturers; PCI Express form factor compatible with 1x slots (x1 or higher compatible) also available ® Datasheet Dialogic Station Interface Boards Technical Specifications DI/SI16, DI/SI24, and DI/SI32 Maximum boards per system 8 Analog station interfaces DI/SI16: 16 DI/SI24: 24 DI/SI32: 32 Fixed voice resources 16, 24, 32 Sharable conference resources 16 CLASS signaling Frequency Shift Keying (FSK) CT Bus loads per board 1 Maximum CT Bus loads per system 20 Resource sharing bus CT Bus/H.100 Control microprocessor ARM7 TDMI Digital signal processor Freescale DSP56303 @ 100 MHz, with 128Kx24 private ® Supported operating systems Windows ; Linux. Details at http://www.dialogic.com/systemreleases Host Interface — PCI Bus compatibility Complies with PCI-SIG Bus SpeciŢcation, Rev. 2.2 Bus speed 33 MHz Bus mode 32- to 16-bit conversion in target mode Shared memory 128 KB page Interrupt level 1 IRQ shared by all DI/SI boards I/O ports None Platform — PCI Form factor PCI long card 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) Power Requirements — from Host PCI Slot DI/SI32 DI/SI24 DI/SI16 +5 VDC 3.5 A max. 3.1 A max. 2.7 A max. +12 VDC 5 mA max. 5 mA max. 5 mA max. –12 VDC 20 mA max. 20 mA max. 20 mA max. Host Interface — PCI Express Bus compatibility Complies with PCI-SIG PCI Express Base SpeciŢcation, Rev. 1.1 Bus speed 2.5 Gbps maximum per direction Bus mode x1 lane conŢguration (x1 or higher compatible) Shared memory 32 KB to 64 KB page Interrupt level Message Signaled Interrupt (MSI) I/O ports None Platform — PCI Express Form factor PCI Express x1 lane conŢguration (or higher) 12.28 inch (31.2 cm) long 4.2 inch (10.67 cm) high 2 ® Dialogic Station Interface Boards Datasheet Technical Specifications (cont.) Power Requirements — from Host PCI Express Slot DI/SI32 DI/SI24 DI/SI16 +3.3 VDC 1.4A 1.2 A 1.0 A +12 VDC 1.0A 0.9A 0.8 A Environmental — PCI and PCI Express Operating temperature +32ºF (0ºC) to +122ºF (+50ºC) Storage temperature –4ºF (–20ºC) to +158ºF (+70ºC) Humidity 8% to 80% non-condensing Cooling Conditions for Maximum Operating Temperatures +122ºF (+50°C) 1.8 CFM per board +104ºF (+40°C) 1.2 CFM per board +86ºF (+30°C) .9 CFM per board Station Interface Signaling type Loop start originate Loop current range 25 ± 5 mA Open loop voltage 20.5 ± 1 VDC External power supply 1 required per board Ring frequency 20 Hz Ring amplitude 40 Vrms @ 20 Hz minimum into 4 REN 2-wire return loss 25 dB Connectors 68-pin SCSI to RJ-11 breakout box Maximum loop length 3500 ft (1050 m) using 24 AWG ® Dialogic Analog Station Interface Usage WARNING This Dialogic analog station interface product is designed to support analog station equipment only within the walls of a single standalone building or structure (i.e., on-premise). It is not designed to sustain electrical overstress from external sources and factors such as severe weather conditions. Electrical overstress can be introduced on cables extending outside of the walls of a single standalone building or structure (i.e., off-premise) such as in a campus environment or other multi-building facility. Severe electrical overstress caused by misuse of this interface product with cables extending outside of the walls of a single standalone building or structure could cause property damage and/or personal injury and/or death. Such misuse voids the warranty for this interface product. Audio Input Interface Input impedance 1000 Ohms, AC coupled Maximum input level 600 mVpp Connector 1/8-in. (.31 cm) mini-phone jack Conferencing Conference resources 16 Conference size 2 to 16 conferees Number of conferences Up to 5 Features Automatic gain control Dynamic create/destroy Dynamic add/delete Echo cancellation Coach/pupil mode DTMF volume control Tone clamping Active talker notiŢcation 3 ® Datasheet Dialogic Station Interface Boards Technical Specifications (cont.) Approval and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC Canada ICES-003 Class A ULc CSA 950 File E96804 Europe EN60950 EN55022 EN55024 Japan VCCI Class A United States FCC Part 15 Class A UL 1950 File E96804 International IEC 950 CISPR 22 CISPR 24 Telecom Approvals United States EBZUSA-43111-CE-T Canada IC:885 11531 X Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telecordia Method 1 PCI: 134,000 hours Warranty Warranty information at http://www.dialogic.com/warranties MSI Global Power Module The MSI Global Power Module generates –24 and –70 volts to power the integrated station interface loop. One power module is required per board when station modules are used. The power module connects to a pre-wired power cable attached to the board. Connectors Input connector Standard North American AC input Output connector 6-pin female mini-DIN Internal fusing Not user replaceable Power Requirements Input voltage 90 VAC to 265 VAC, 47 Hz to 63 Hz Output voltage –24 VDC: 1.0 A –70 VDC: 300 mA Output ripple 100 mV (peak-to-peak main) Percent regulation ± 2.5% for –24 V ± 7.5% for –70 V Operating temperature +32ºF (0ºC) to +122ºF (+50ºC) Dimensions Length: 6.5 in. (16.25 cm) Width: 3.75 in. (9.375 cm) Height: 2.17 in. (2.425 cm) Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Warranty Warranty information at http://www.dialogic.com/warranties Safety Certifications UL 1950 3rd edition File No: E148586 TUV EN60950 File No: B970624072005 CE CUL (CSA 950) File No: E160908 DENAN PS-E MEL 080801-NC 4339 4 ® Dialogic Station Interface Boards Datasheet Technical Specifications (cont.) DI/SI Breakout Box and Cable DI/SI16, DI/SI24, and DI/SI32 use a 68-pin SCSI connector to provide physical analog station interfaces. The DI/SI Breakout Box includes a 68-pin SCSI cable to connect the DI/SI boards to a 32-port RJ-11 patch panel. DI/SI Telephony Adaptor Cable DI/SI16, DI/SI24, and DI/SI32 use a 68-pin SCSI connector to provide physical analog station interfaces. The DI/SI telephony adaptor cable is a 12-inch (30.5 cm) cable with a 68-pin SCSI connector to attach to the DI/SI boards at one end, and two RJ-21X male amphenol-style connectors at the other end, carrying 16 stations each. System Hardware Requirements Pentium processor based bus or compatible computer (PCI or PCI Express). Operating system hardware requirements vary according to the number of channels being used. Ordering Information Product Code Order Code Description DISI16W 882-698 16-port Analog Station, PCI DISI24W 882-701 24-port Analog Station, PCI DISI32W 882-702 32-port Analog Station, PCI DISI16EW 884-570 16-port Analog Station, PCIe DISI24EW 884-595 24-port Analog Station, PCIe DISI32EW 884-658 32-port Analog Station, PCIe MSISCGBLPWRMODW 882-818 MSI Global Power Module: external station power supply; supports up to 32 stations; supports one board DISIBOBKITW 882-759 DI/SI Breakout Box: 68-pin SCSI connector from DI/SI board breakouts to (32) RJ-11 jacks; 68-pin cable included CBLTAC0X32Q 883-037 DI/SI Telephony Adaptor Cable: 68-pin SCSI connector to (2) RJ-21X male amphenol-style connectors, 12 inch (30.5 cm) total length 5 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF THE DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED ® WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic. Dialogic's trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Copyright © 2007 Dialogic Corporation All rights reserved. 10/07 8492-10 www.dialogic.com