™ ™ ® The BradCommunications SST PROFIBUS scanner ® ™ connects your Allen-Bradley SLC 5/03 or higher controller to PROFIBUS DP. 30 Oct. 09 DW2006134 PROFIBUS DP Scanner Features For the Allen-Bradley SLC 500 Controller • Enhanced design! … 100% backward compatible with previous generation (SST-PFB-SLC) … Manages DP-V1 Services including SLC ladder logic samples … Doubling of M0 and M1 data area up to 1000 words … Module can “Set Slave” address • PROFIBUS DP Master Configuration Software • Supports all PROFIBUS baud rates including 31.25 and 45.45 kbps • Simultaneous operation of PROFIBUS DP Master and Slave Overview • Flash memory for storage of DP Master I/O configuration The BradCommunications SST PROFIBUS scanner connects your • Fast, easy set up into SLC Allen-Bradley SLC 5/03 or higher controller to PROFIBUS as a master or slave to backplane, PROFIBUS I/O data is scan or emulate PROFIBUS DP I/O. With the new user-defined data space of 2064 automatically mapped into the ™ ™ Bytes Input and 2064 Bytes Output, the BradCommunications SST Profibus SLC’s processor’s I, O files and into module provides a cost efficient solution to connect the SLC CPU with large MO and MI files residing on PB3- PROFIBUS networks. SLC • Supports exported configuration files from the SST DP configuration software and Siemens COM PROFIBUS • Multiple SST-PB3-SLC modules can be used in one SLC rack Protocols SST-PB3-SLC • PROFIBUS DP-V0 Master Class 1&2 • PROFIBUS DP-V1 Master Class 1&2 • PROFIBUS DP-V0 Slave Typical Applications • Packaging machinery • Conveyor & handling systems • Food products machinery A 9-pin serial port included on the scanner provides for firmware upgrades in the field and the upload of I/O configurations. The SLC’s processor logic scan and the PROFIBUS I/O scan are independent of each other. The SLC processor reads the scanner input data during its input scan and writes the output data during its output scan. The scanner reads input data from the slaves and writes output data to the slaves independent of what the SLC is doing. Slave status, diagnostic status information on all slaves, network diagnostic counters and DP Master diagnostic counters are maintained by the scanner. The scanner does not require the set up of a G-file in the SLC. ® PROFIBUS DP Scanner Diagnostic & Software Tools Network Specifications Configuration Software • PROFIBUS DP-V0 Master, class 1&2 • Browse your DP network for slave • PROFIBUS DP-V1 Master, class 1&2 Protocol devices you want to include in your • PROFIBUS DP-V0 Slave (up to 122 words of input data and 122 words of output data as slave) DP Master configuration using the LAN Controller • Siemens ASPC2 DPView component Slaves Supported • Maximum of 125 Scanner Software I/O per Slave • Maximum of 244 bytes in/out • I and O files: 32 words input + 32 words output • Maintains slave status, diagnostic • M1 and M0 files: 1000 words input + 1000 words status information on all slaves, output (128 words in / out if configuring with COM I/O Mapping network diagnostic counters, and PROFIBUS) ™ (for SLC ) DP Master diagnostic counters • Slave data is mapped into I, O, M0, M1 files in the SLC. Mapping depends on addresses assigned in • Maintains network and I/O module the configuration created status information including: • 9600, 19200, 31.25k, 45.45k, 93.75k, 187.5k, 500k, • DP Master Slave status table Data Rate 1.5M, 3M, 6M, 12M • Network diagnostic counters • Belden 3079A ™ ® • DP Master diagnostic counters Cable • BradConnectivity Brad Harrison 85-0001 PVR2 conductor with shield, UL-listed Connector • DB9 female connector Diagnostic LEDs Hardware Specifications • COMM and SYS LEDs provide immediate notification of network ® ™ and system errors Bus Interface Allen-Bradley SLC 5/03 or higher Protocol processor: Freescale Coldfire MCF5272 Processors Backplane processor: Altera Cyclone II Other PROFIBUS Products • 2 MB of local Coldfire SDRAM • 32 MB of local NIOS DDR • PROFIBUS modules for Memory ® ® • 512 KB of onboard shared memory Allen-Bradley ControlLogix • 512 KB of sectored flash memory • PROFIBUS network interface cards for storage of program and configuration data (USB, PCI, CompactPCI, PC/104, Two LEDs indicate: ISA, VME64) with many user Diagnostics 1. health of the PROFIBUS network (COMM) interfaces (DLL, OPC, ActiveX…) 2. communication status with PROFIBUS slaves (SYS) Backplane 750mA @ 5V from a supply delivering Separated Extra • PROFIBUS gateways to Serial and Current Consumption Low Voltage (SELV) Ethernet networks Operating T° 0ºC (32ºF) up to +50ºC (122ºF) • IP67 PROFIBUS I/O modules Storage T° -40ºC (-40°F) up to +85ºC (185°F) (M8/M12 connectors) Relative Humidity 5% to 95% non-condensing • Full metal PROFIBUS connector Degree 1 - no pollution, or only non-conductive or non- Pollution degree • Cable, cordsets, receptacles corrosive pollution RoHS Compliant Yes Ordering Information Part Number SAP Description BradCommunications™ SST™ PROFIBUS Scanner SST-PB3-SLC 1120160022 for Allen-Bradley SLC 500 Other related products: Part Number SAP Description BradCommunications™ SST™ PROFIBUS Scanner SST-PB3-CLX-RLL 1120160018 for Allen-Bradley ControlLogix BradCommunications™ SST™ PROFIBUS Scanner SST-PB3-CLX-DTM 1120160019 for Allen-Bradley ControlLogix and CommDTM driver To contact us: www.woodhead.com North America: US: + 1 800 225 7724 – Canada: +1 519 725 5136 Europe: France: +33 2 32 96 04 20 – Germany: +49 7252 94 96 0– Italy: +39 010 59 30 77 – United Kingdom: +44 1495 356300 Asia: Shanghai, China: +86 21-5835-9885 - Tianjin, China: +86 22-23321717 Singapore: +65 6268-6868 – Yamato, Japan: +81 46-265-2428 – Nagoya, Japan: +81 52-221-5950 Brad is a registered trademark and BradCommunications, SST and applicom are trademarks of Molex Incorporated. © 2008 Molex