Circuit Breakers & Supplementary Protectors 45-54 10 – 225 Amperes August 2006 F-Frame F-Frame Technical Data and Specifications Table 45-92. UL 489 Interrupting Capacity Ratings Circuit Number Interrupting Capacity (kA Symmetrical Amperes) Breaker of Poles � Volts ac (50/60 Hz) Volts dc Type �� 240 277 480 600 125 250 EDB 2, 3 22 — — — 10 — EDS 2, 3 42 — — — 10 — ED 2, 3 65 — — — 10 — EDH 2, 3 100 — — — 10 — EDC 2, 3 200 — — — 10 — EHD 1 — 14 — — 10 — 2, 3 18 — 14 — — 10 FDB 2, 3, 4 18 — 14 14 — 10 FD, 1 — 35 — — 10 — � FDE 2, 3, 4 65 — 35 18 — 10 Typical F-Frame Breaker HFD, 1 — 65 — — 10 — � HFDE 2, 3, 4 100 — 65 25 — 22 � FDC , 2, 3, 4 200 — 100 35 — 22 �� FDCE � dc ratings apply to substantially non-inductive circuits. � 2-pole circuit breaker, or two poles of 3-pole circuit breaker. � Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 22 kA. � Electronics available on 3-pole only. � Current limiting. Table 45-93. IEC 157-1 (P1) Interrupting Capacity Ratings (P1) Circuit Number Interrupting Capacity (kA Symmetrical Amperes) Breaker of Poles � Volts ac (50/60 Hz) Volts dc Type �� 220, 240 380, 415 440 500 125 250 F-Frame Breaker with Electronic Trip Unit EDB 2, 3 22 — — — 10 — 45 EDS 2, 3 42 — — — 10 — ED 2, 3 65 — — — 10 — Product Description EDH 2, 3 100 — — — 10 — EDC 2, 3 200 — — — 10 — ■ All Eaton’s Cutler-Hammer F-Frame FDB 2, 3, 4 18 14 14 14 — 10 Circuit Breakers by are HACR rated. FD 1 35 — — — 10 — ■ All circuit breakers 10 through 2, 3, 4 65 35 35 18 — 10 30 amperes are suitable for HID HFD 1 65 — — — 10 — (high intensity discharge) use. 2, 3, 4 100 65 65 25 — 22 ■ All F-Frame circuit breakers are FDC 2, 3, 4 200 100 100 35 — 22 suitable for reverse feed use � dc ratings apply to substantially non-inductive circuits. � 2-pole circuit breaker, or two poles of 3-pole circuit breaker. � Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 22 kA. Table 45-94. Digitrip Electronic Trip Units Circuit Frame Ratings Breaker Type FDE, HFDE, 225 100, 110, 125, 150, 160, FDCE 175, 200, 225 FDE, HFDE, 160 60, 70, 80, 90, 100, 125, FDCE 150, 160 FDE, HFDE, 80 15, 20, 30, 40, 50, 60, FDCE 70, 80 For more information visit: www.EatonElectrical.com CA08102001E Circuit Breakers & Supplementary Protectors 45-55 10 – 225 Amperes August 2006 F-Frame Table 45-95. F-Frame Digitrip Specifications Trip Unit Digitrip Type RMS 310+ rms Sensing Yes Breaker Type Frame FDE Ampere Range 15 – 225 A Interrupting Rating at 480 V 35, 65, 100 (kA) Protection Ordering Options LS LSI LSG LSIG Fixed Rated Plug (I ) No n Overtemperature Trip Yes Long Delay Protection (L) Adjustable Rating Plug (I ) No n Long Delay Pickup 40 – 100% Frame 2 Long Delay Time I t 2 – 24 Seconds 4 Long Delay Time I t No Long Delay Thermal Memory Yes High Load Alarm Yes Short Delay Protection (S) Short Delay Pickup 200 – 1000% x (I ) r 2 Short Delay Time I t Yes No Short Delay Time Flat No Inst – 300 ms Short Delay Time Z.S.I. No Instantaneous Protection (I) Instantaneous Pickup No Discriminator No Instantaneous Override Yes Ground Fault Protection (G) Ground Fault Alarm No Ground Fault Pickup 20 – 100% Frame 45 2 Ground Fault Delay I t No Ground Fault Delay Flat Inst – 300 ms Ground Fault Z.S.I. No Ground Fault Thermal Memory Yes System Diagnostics Cause of Trip LEDs No Magnitude of Trip Information No Remote Signal Contacts No System Monitoring Digital Display No Current No Voltage No Power and Energy No Power Quality Harmonics No Power Factor No Communications PowerNet No Testing Testing Method Test Kit I = Rating Plug n I = LDPU Setting x I n r CA08102001E For more information visit: www.EatonElectrical.com Circuit Breakers & Supplementary Protectors 45-56 10 – 225 Amperes August 2006 F-Frame Dimensions/Weights Table 45-96. Dimensions in Inches (mm) Table 45-97. Approximate Shipping Weight, Lbs. (kg) Number Width Height Depth Breaker Number of Poles of Poles Type 12 3 4 1 1.38 (35.1) 6.00 (152.4) 3.38 (86.0) ED, EDB, EDS, EDH, EDC — 3 (1.4) 4.5 (2.0) — 2 2.75 (70.0) 6.00 (152.4) 3.38 (86.0) EHD, FDB, FD, HFD, FDC 2 (.9) 3 (1.4) 4.5 (2.0) 6 (2.7) 3 4.13 (105.0) 6.00 (152.4) 3.38 (86.0) FDE, HFDE, FDCE — — 4.5 (2.0) — 4 5.50 (139.7) 6.00 (152.4) 3.38 (86.0) Product Selection This information is presented only as an aid to understanding Catalog Numbers. It is not to be used to build Catalog Numbers for circuit breakers or trip units. Table 45-98. Circuit Breaker Catalog Numbering System FDC 3 100 L Circuit Number Trip Amperes Suffix Breaker Type of Poles 010 E = 100% Protected (4-Pole only) Neutral Pole EHD 1 = 1 Pole 015 EH = 50% Protected (4-Pole only) FDB 2 = 2 Poles 020 K = High Magnetic Molded Case Switch FD 3 = 3 Poles 025 L = Line and Load Terminals HFD 4 = 4 Poles 030 S = Stainless Steel Terminals FDC 035 V = 50°C Calibration 040 W = Without Terminals 045 Y = Line Terminals Only 050 Z = Aluminum Terminals () 100 Amperes) 060 070 080 45 090 100 110 125 150 175 (FD, HFD, FDC, 2-, 3-, 4-Pole Only) 200 (FD, HFD, FDC, 2-, 3-, 4-Pole Only) 225 (FD, HFD, FDC, 2-, 3-, 4-Pole Only) EDC 3 200 L Circuit Number Trip Suffix Breaker Type of Poles Amperes L = Line and Load Terminals ED 2 = 2 Poles 100 W = Without Terminals EDB 3 = 3 Poles 125 Y = Line Terminals Only EDS 150 Z = Aluminum Terminals (100 Amperes) EDH 175 EDC 200 225 FDE 3 225 32 W Circuit Number Trip Trip Suffix Breaker Type of Poles Amperes Unit W = Without Terminals FDE 3 = 3 Poles 80 33 = LS HFDE 160 32 = LSI FDCE 225 35 = LSG 36 = LSIG For more information visit: www.EatonElectrical.com CA08102001E