® FDC Unit Connector Panels ® An Evolant Solutions Product and Modules Corning Cable Systems offers a variety of panels and features and benefits | ® modules for use in the FDC unit family of products. Compatible with Corning Reduced inventory The panels are used with field-installable connectors or Cable Systems Fiber complexity in applications where the preconnectorized cables are Distribution Centers routed directly to the FDC unit housing. Both the panels Termination of inter- Variety of deployment and the modules may be equipped with 900 µm single- building backbone options fiber or ribbon-fiber pigtails for pigtail splicing. cables at main or inter- mediate cross-connect Panels and modules are available with a variety of Modules accommodate Flexibility of deployment connector types. Plastic modules include molded-in various fiber and areas for coiling fiber slack and protecting the minimum connector types bend-radius of the fiber. Fiber routing and bend- Clean and easily radius protection accessible fiber routing designed into modules with fewer breaks FDC-CM125-8 ZA-3556 Connector Module FDM12P12-3C-3RH000 Connector Module FDM08P08-3C-3RH000 | Drawing ZA-3556 | Drawing ZA-3557 SPECIFICATION SHEET EVO-245-EN | PAGE 1 OPEN CLOSE | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | HARDWARE | COPPER CONNECTIVITY | SPLICE AND TEST EQUIPMENT | TRAINING | ® FDC Unit Connector Panels ® An Evolant Solutions Product and Modules ordering information| Connector Panels – with Adapters ® FDC - CP1P -     -     6-in FDC Unit Connector Panel with factory-installed adapters |1 |2 FDC - CP8P -     -     7.5-in FDC Unit Connector Panel with factory-installed adapters Note: 7.5-in FDC Connector Panels fit Housing FDC-CMH-096 |1 |2 and FHC-CMH-144 only. |1 |2 Select fiber count. Select Adapter/Connector Code 06 = 6 fibers (6-in panels only) (see Adapter/Connector Code Options table on page 4). 08 = 8 fibers (7.5-in panels only) 12 = 12 fibers 24 = 24 fibers (LC duplex only) FDC-CP1P-38 6-in panel fits FDC-CMH-072 7.5-in panel fits FDC-CMH-096 and CMH-024 Connector Panel FDC-CP1P-06-3C and FDC-CP8P-08-3C ZA-3554 | Drawing ZA-3554 and ZA-3555 SPECIFICATION SHEET EVO-245-EN | PAGE 2 ® FDC Unit Connector Panels ® An Evolant Solutions Product and Modules ordering information | (continued) Pigtailed Panels and Modules           P     -     -       0 0 0 |1 |2 |3 |4 |5 |6 |7 |3 |5 |6 |1 Select number of fibers Select pigtail length in Select mode of Select housing type. ® FDM = FDC Unit Module per panel. meters (1 m = 3.281 ft; operation. FDP = FDC Unit Panel 06 = 6 fiber R= Single-mode 0-9 m, enter number; 08 = 8 fiber C= 50/125 µm multimode 9+, enter first digit of 12 = 12 fiber K= 62.5/125 µm multimode alphanumeric code |2 S= Laser-optimized from Table A). multimode (50 µm) Select total fiber count. Examples: |4 06 = 6 fiber (6-in FDM 3= 3 m (Standard) Select adapter/ or FDP) A= 10 m |7 connector code 08 = 8 fiber (7.5-in FDM only) F = 15 m 12 = 12 fiber (6-in FDM Select pigtail type. (see Adapter/Connector or FDP) ® H= Jacketed MIC Cable Code Options table subunit, Enhanced on page 4). ™ OptiStrip Buffered Fiber J= Ribbon Table A: Codes for Over 9 _ A = 10 _ M = 21 Examples: _ B = 11 _ N = 22 E4 = 144 m _ C = 12 _ P = 23 A5 = 105 m _ D = 13 _ Q = 24 M6= 216 m _ E = 14 _ R = 25 T9 = 279 m _ F = 15 _ S = 26 _ G = 16 _ T = 27 Notes: _ H = 17 _ U = 28 1) “I” and “O” are not used. _ J = 18 _ V = 29 2) FDC Pigtailed Panels and Modules are generally limited _ K = 19 _ W = 30 to lengths of 31 meters (100 ft). Please contact customer _ L = 20 _ service if longer lengths are required X = 31 SPECIFICATION SHEET EVO-245-EN | PAGE 3 | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | HARDWARE | COPPER CONNECTIVITY | SPLICE AND TEST EQUIPMENT | TRAINING | ® FDC Unit Connector Panels ® An Evolant Solutions Product and Modules adapter/connector code options | Available Fibers/Panel Counts FDC 6-in Panel FDC 7.5-in Panel (FDC-CP1P) (FDC-CP8P) Adapter Fiber/ Code Fiber Type Alignment Housing Adapter 6 12 24 8 12 LC Duplex A7 62.5 µm multimode Metal Composite 2XXX XX A8 62.5 µm multimode Ceramic Composite 2XXX XX D3 50 µm multimode Ceramic Composite 2XXX XX E4 50 µm LOMMF Ceramic Composite 2XXX XX A9 Single-mode, UPC Ceramic Composite 2XXX XX SC Duplex 91 62.5 µm multimode Metal Composite 2XX- XX G7 50 µm multimode Ceramic Composite 2XX- XX E7 50 µm LOMMF* Ceramic Composite 2XX- XX 59 Single-mode, UPC Ceramic Composite 2XX- XX D9 Single-mode, APC Ceramic Composite 2XX- XX SC 56 62.5 µm multimode Metal Composite 1XX- XX G6 50 µm multimode Ceramic Composite 1XX- XX E6 50 µm LOMMF* Ceramic Composite 1XX- XX 3C Single-mode, UPC Ceramic Composite 1XX- XX 6C Single-mode, APC Ceramic Composite 1XX- XX ® ST Compatible Connector (Flanged) 25 62.5 µm multimode Composite Composite 1XX- X- 15 62.5 µm multimode Ceramic Composite 1XX- X- 19 Single-mode, UPC Ceramic Composite 1XX- X- E5 50 µm LOMMF* Ceramic Composite 1XX- X- G4 50 µm multimode Ceramic Composite 1XX- X- FC 11 Single-mode, UPC Metal Metal 1XX- XX 21 Single-mode, APC Metal Metal 1XX- XX Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-901-5973 • International: +1-828-901-5000 • www.corning.com/cablesystems Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. Evolant, FDC and MIC are registered trademarks of Corning Cable Systems Brands, Inc. OptiStrip is a trademark of Corning Cable Systems Brands, Inc. ST is a registered trademark of Lucent Technologies. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. © 2003, 2010 Corning Cable Systems. All rights reserved. Published in the USA. EVO-245-EN / February 2010 SPECIFICATION SHEET EVO-245-EN | PAGE 4