® OptiTap 1F Single-Tube, OptiTap to OptiTap, Toneable, Gel-Filled Cable Assembly Single-mode (OS2), 200 ft 133 As an indus- try leader As an industry leader in optical connectivity products, Corning Cable Systems designs and manufactures the SST -Drop™ Cable Assembly with factory -terminated, en- vironmentally sealed and hardened connectors to reduce the cost and the time of drop cable deployment in optical ® access networks. The OptiTap Single -Fiber Drop Cable Assembly is specifically designed to significantly reduce required drop cable installation. Features and Benefits Smaller profile and reduced bend-radius Designed for rapid connection to external flush-mounted bulkhead adapters on terminals or closures Robust design keeps connector intact during instal- lation Integral pulling eye/connector cap designed for 100 lb Part Number: 434301EB1TD200F-P maximum pulling tension 1 1 Standards Approval and Listings SST-Drop™ Cable fully compliant with Telcordia GR-20 requirements Design and Test Criteria Telcordia GR-3120 19.48 115 0 Specifications General Specifications Application Aerial, Direct Buried, Duct Cable Type SST-Drop™ toneable Fiber Category Single-mode (OS2) Termination Both ends Product Type Drop Assemblies Packaging Individual Packaging Specification Sheets 434301EB1TD200F-P_NAFTA_AEN Page 1 | Revision date 2011-12-18 ® OptiTap 1F Single-Tube, OptiTap to OptiTap, Toneable, Gel-Filled Cable Assembly Single-mode (OS2), 200 ft Temperature Range Operation -40 °C to 70 °C (-40 °F to 158 °F) Mechanical Characteristics Axial pull, plug to cable, through the dust cap 100 lb in axial pull with load applied to the dust cap Axial pull, plug to adapter coupling strength 50 lb Cold mate / demate -40 °C mechanical testing Weight 2.04 kg (4.5 lb) Cable Length 61 m (200 ft) Design - Connector A ® Connector Type SC APC OptiTap Connector Optical Specifications - Connector A Insertion Loss, Insertion Loss, T Typical ypical ≤ ≤ 0.15 dB 0.15 dB Reflectance, Reflectance, T Typical ypical -65 -65 dB dB Design - Connector B ® Connector Type SC APC OptiTap Connector Optical Specifications - Connector B Insertion Loss, Typical ≤ 0.15 dB Reflectance, Typical -65 dB Specification Sheets 434301EB1TD200F-P_NAFTA_AEN Page 2 | Revision date 2011-12-18 ® OptiTap 1F Single-Tube, OptiTap to OptiTap, Toneable, Gel-Filled Cable Assembly Single-mode (OS2), 200 ft Chemical Characteristics Free of hazardous substances according to RoHS 2002/95/ RoHS EG Fiber Specifications Optical Characteristics (cabled) Fiber Core Diameter 9 µm Fiber Type Single-mode Fiber Category OS2 Fiber Code E Performance Option Code 01 Wavelengths 1310 nm / 1383 nm / 1550 nm Maximum Attenuation 0.65 dB/km / 0.65 dB/km / 0.5 dB/km Serial 1 Gigabit Ethernet 5000 m / - / - Serial 10 Gigabit Ethernet 10000 m / - / 40000 m * ITU-T G.652 D compliant ® * Meets 0.75 ns optical skew when used in all Corning Cable Systems Plug & Play™/Pretium EDGE Systems Solutions Notes: 1) Improved attenuation and bandwidth options available 2) Bend-insensitive single-mode fibers available on request 3) Contact a Corning Cable Systems Customer Service Representative for additional information Ordering Information Order Number 434301EB1TD200F-P ® OptiTap Single-Fiber SST-Drop™ Single-Tube, OptiTap to Product Description OptiTap, Toneable, Gel-Filled Cable Assembly, individual packaging, Single-mode (OS2), 200 ft Shipping Information Units per Delivery 1/1 Packaging Dimensions (L x H x W) 508 mm x 76 mm x 508 mm (20 in x 3 in x 20 in) Packaging Method Box Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/trademarks. Corning Cable Systems is ISO 9001 certified. © 2012 Corning Cable Systems. All rights reserved. Specification Sheets 434301EB1TD200F-P_NAFTA_AEN Page 3 | Revision date 2011-12-18