R4AB-976VL-P7X - COMMELL - Industrial Trading

Description

Commell R4AB-976VL-P7X 4U Rackmount Socket 478 Pentium 4 DDR Industrial Multiple7 PCI / 5 ISA platform. Support Intel Pentium 4 / Celeron CPU @ 533/400 MHz FSB, DDR200/266 SDRAM with 3D SVGA / 64MBSGRAM, LAN, Audio, USB 2.0, and 300W P4 Power Supply

Part Number

R4AB-976VL-P7X

Price

Request Quote

Manufacturer

COMMELL

Lead Time

Request Quote

Category

Systems

Specifications

(Optional SCSI)

Support up to three bus master PCI embedded modular peripheral

CPU

Intel Socket 478 Pentium 4 / Celeron CPU up to 3.06 GHz @ 533 / 400 MHz FSB Intel 0.13- / 0.18-micron Northwood / Willamette Pentium 4 / Celeron CPU Support Intel Hyper-Threading Technology

CPU Card (SBC)

COMMELL FS-976 PICMG Socket 478 Pentium 4 DDR Single Board Computer Based on Intel 845E MCH and ICH2 chipset

Drive Bay

External 3 x 5.25”and 1 x 3.5”drive bay, internal 1 x 3.5”drive bay All with advanced shock / vibration proof construction

Expansive Interface

12 x PCI / ISA expansive bus interface with PICMG industrial passive / active backplane

Form Factor

4U 19”Rackmount EIA RS-310C industrial PC chassis PICMG version 1.0 (Rev. 2.0) and PCI version 2.0 compliant

Front Panel

Lockable front door for system safety, security and dust-proof

LAN Interface

Onboard dual Intel PRO/100+ LAN interfaces, IEEE 802.3U compliant 1st LAN with Intel ICH2 and 82562ET, 2nd LAN with Intel 82559ER

Memory

Two 184-pin DIMM sockets support 2 GB DDR200/266 SDRAM / ECC (No-registered)

Multi-I/O Port

2 x RS-232 serial ports (1 jumper selectable RS-232/422/485 serial port) 1 x SPP/EPP/ECP parallel port, 2 x USB 1.1 ports

PC/104-Plus Interface

32-bit PCI-based PC/104-plus embedded peripheral interface

PCI Enhanced IDE

Dual UltraATA/100 bus master IDE channels up to 4 ATAPI devices Jumper selectable +5V Vcc on IDE2 for power cable free DOM (DiskOnModule)

Power Manegement

ACPI 1.0 compliant, supports power saving mode with ATX power supply

Solid State Disk

M-systems 32-pin DIP JEDEC DiskOnChip socket up to 1 GBytes of capacity IDE-based DOM (DiskOnModule) or M-systems DiskOnChip IDE Pro on IDE port

Thermal Control

One dual ball-bearing 12cm / 85 CFM system cooling fan on the front panel

VGA Interface

Onboard 4xAGP SiS315 VGA controller with 256-bit 3D engine Onboard 64 MB DDR333 SGRAM for independent video memory

Watchdog Timer

Generates NMI or system reset with 1 to 255 sec. / min. of time out value

Features

12 cm dual ball bearing system fan with easy-to-remove / replace air filter
Excellent mechanical designed for shock, dust, water and vibration protection
External 3 x 5.25" and 1 x 3.5", internal 1 x 3.5" drive bay
High reliability Intel 82845E MCH and 82801BA ICH2 chipset
Industrial EIA RS-310C rackmount 4U chassis with EMI shielding and protection, heavy-duty steel / rugged construction for harsh industrial environment
Integrated 4xAGP 256-/128-bit 3D/2D SVGA controller with onboard 64 MB DDR333 SGRAM of video memory
Lockable front door for dust-proof, system safety and security
M-systems DiskOnChip 2000, Millennium and IDE Pro embedded SSD supported
Multiple PCI/ISA expansibility with high reliability of Intel PCI-to-PCI bridge for multiple PCI platform or ISA 64mA high drive capacity for multiple ISA platform
Optional 300+300 watt mini-redundant P4 ATX power supply
Optional onboard dual channel Ultra160 SCSI or other PCI-based embedded peripheral interfaces
Optional onboard dual Intel PRO/100+ LAN Interface
Powerful computing capacity with Intel mPGA478 Pentium 4 / Celeron CPU at 533/400 MHz of FSB with Intel NetBurst micro-architecture and high memory capacity up to 2 GB DDR200/266 (PC1600/2100) SDRAM w
System stability and anti-vibration hold-down clamp

Datasheet

Commell-R4AB-976-datasheet1-1691934326.pdf

87 KiB

Download

Extracted Text

Industrial PC Platform Industrial PC Platform Performance Rackmount PICMG Pentium 4 DDR Solution R4AB-976 4U Rackmount PICMG Pentium 4 DDR Platform with 533/400 MHz FSB, Intel Hyper-Threading 4xAGP SVGA/64 MB SGRAM, Dual LAN, SCSI External 3 x 5.25” and 1 x 3.5” Drive Bay Free 12 PCI/ISA Expansive Slots and ISA High Drive Form Factor 4U 19” Rackmount EIA RS-310C industrial PC chassis PICMG version 1.0 (Rev. 2.0) and PCI version 2.0 compliant CPU Card (SBC) COMMELL FS-976 PICMG Socket 478 Pentium 4 DDR Single Board Computer Based on Intel 845E MCH and ICH2 chipset CPU Intel Socket 478 Pentium 4 / Celeron CPU up to 3.06 GHz @ 533 / 400 MHz FSB Intel 0.13- / 0.18-micron Northwood / Willamette Pentium 4 / Celeron CPU Support Intel Hyper-Threading Technology Memory Two 184-pin DIMM sockets support 2 GB DDR200/266 SDRAM / ECC (No-registered) Watchdog Timer Generates NMI or system reset with 1 to 255 sec. / min. of time out value Power Manegement ACPI 1.0 compliant, supports power saving mode with ATX power supply Solid State Disk M-systems 32-pin DIP JEDEC DiskOnChip socket up to 1 GBytes of capacity IDE-based DOM (DiskOnModule) or M-systems DiskOnChip IDE Pro on IDE port PCI Enhanced IDE Dual UltraATA/100 bus master IDE channels up to 4 ATAPI devices Jumper selectable +5V Vcc on IDE2 for power cable free DOM (DiskOnModule) VGA Interface Onboard 4xAGP SiS315 VGA controller with 256-bit 3D engine Onboard 64 MB DDR333 SGRAM for independent video memory LAN Interface Onboard dual Intel PRO/100+ LAN interfaces, IEEE 802.3U compliant 1st LAN with Intel ICH2 and 82562ET, 2nd LAN with Intel 82559ER PC/104-plus Interface 32-bit PCI-based PC/104-plus embedded peripheral interface (Optional SCSI) Support up to three bus master PCI embedded modular peripheral Optional dual channel Ultra160 SCSI interface with PC/104-plus module Multi-I/O Port 2 x RS-232 serial ports (1 jumper selectable RS-232/422/485 serial port) 1 x SPP/EPP/ECP parallel port, 2 x USB 1.1 ports IrDA port, floppy port, AT keyboard, PS/2 keyboard and mouse port Drive Bay External 3 x 5.25” and 1 x 3.5” drive bay, internal 1 x 3.5” drive bay All with advanced shock / vibration proof construction Expansive Interface 12 x PCI / ISA expansive bus interface with PICMG industrial passive / active backplane Optional free 4 x PCI / 8 x ISA, 7 x PCI / 5 x ISA, 12 x PCI and 12 x ISA expansive slots Intel PCI bridge for multiple PCI and ISA 64mA high drive for multiple ISA platform Free 8 x full-size and 4 x half-size add-on cards with hold-down clamp Thermal Control One dual ball-bearing 12cm / 85 CFM system cooling fan on the front panel Removable air / dust filter on the external front panel Front Panel Lockable front door for system safety, security and dust-proof Power / access LED, power / reset switch and AT keyboard connector COMMELL SYSTEMS Corporation OMMELL 8F, No. 94, Sec. 1, Shin Tai Wu Rd., Hsi Chih, Taipei Shien, Taiwan Csystems TEL : +886-2-26963909 Website : http://www.commell-sys.com info@commell-sys.com FAX : +886-2-26963911 E-mail : www.commell-sys.com

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products