LV-67A
Mini-ITX motherboard
User’s Manual
Edition: 1.5
2011/9/27
LV-67A User’s Manual
Copyright
Copyright 2009. All rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT.
2
LV-67A User’s Manual
Packing List
Please check package component before you use our products.
Hardware:
LV-67A Mini-ITX motherboard x 1
Cable Kit:
SATA Cable x 2
26-pin Slim Type Floppy Cable x 1
(OALSATA-L)
(OALFD/NB)
VGA Cable x 1 (LV-67AT only)
COM Port Cable x 1
USB Cable x 1
(OAL1S)
(OAL-10PCRT)
(OALUSBA-1)
DVI module with bracket x 1 DVI module with bracket x 1
(BADPDVI2P_A & OALDVI-P) (BADPDVIP_A & OALDVI-P)
(LV-67AD2 Only) (LV-67AD Only)
I/O Shield x 1
(OPLATE-67A)
Other Accessories:
Divers CD (including User’s Manual) x 1
3
LV-67A User’s Manual
Index
Chapter1 ......................................................................................... 7
1.1 ................................................................................. 7
1.2 ........................................................................... 8
1.3 .................................................................................... 10
1.4 .......................................................................... 11
Chapter 2 ............................................................................... 12
2.1 ............................................................................ 12
2.2 ............................................................................. 13
2.3 ......................................................................... 14
2.3.1 ................................................................ 14
2.3.2 ............................................................... 14
2.4 .................................................................... 15
2.4.1 ...................................................................... 15
2.4.2 ................................................................ 16
2.5 ...................................................................................... 18
2.6 ......................................................................... 19
2.7 .............................................................................. 20
2.8 .................................................................................. 21
2.9 ................................................................. 22
2.9.1 ....................................................................... 22
2.9.2 ................................................. 23
2.9.3 ..................................... 26
2.10 .............................................................................. 27
2.11 ............................................................. 29
2.12 ................................................................................ 30
2.13 .............................................................. 32
2.14 ........................................................................................ 34
2.15 ......................................................................... 37
4
LV-67A User’s Manual
Chapter 3 ...................................................................... 39
3.1 ............................................................................. 39
3.2 .................................................................. 40
3.3 ........................................................................... 44
3.4 ......................................................................... 45
3.5 .................................................................. 47
Chapter 4 ...................................................................................... 49
Appendix A ................................................................ 51
A.1 ................................................................................... 51
A.2 ......................................................................................... 51
A.3 ............................................................................................ 52
A.5 ............................................................................................ 53
A.6 ............................................................................................ 53
Appedix B .......................................................................... 54
B.1 ........................................................................ 54
B.2 ........................................................................ 56
B.3 ..................................................................... 57
Appedix C ...................................................................................... 58
C.1 ........................................................................ 58
C.2 ..................................................................................... 58
Appendix D .................................................................... 59
Appendix E .............................................................. 60
Contact Information............................................................................................... 61
5
LV-67A User’s Manual
(This Page is Left for Blank)
6
LV-67A User’s Manual
Chapter1
1.1
LV-67A is the motherboard with last Intel desktop technology with Mini-ITX form factor.
Based on Intel® Q45 and ICH10DO, the board integrates a new Core 2 Quad / Core 2 Duo
Celeron processor 775-pin socket, DDR3 memory socket, Intel® Graphic Media Accelerator
4500 technology, Serial ATA II with RAID function for a powerful desktop system.
Intel® LGA775 processor
The Intel® Core 2 Quad / Core 2 Duo / Celeron processor now comes with a new form
factor with 775-pin PLGA package, for 800/1066/1333MHz front-side-bus, 12MB L2 cache,
for 65nm and 45nm manufacturing technology, the PLGA processor without pin header on
solder side can make user installing the processor on the socket easier.
Intel® Q45 and ICH10DO chipset
The Intel Q45 integrates DDR3 800/1066MHz for memory, and Graphic Media Accelerator
(GMA) 4500 technology for new graphic engine. It can provide up to 1024MB of frame
buffer when you install over 1GB of system memory. The ICH10DO integrates with up to 8
USB2.0 interfaces, and serial ATA II interface with RAID function.
Flexible Extension Interface
The board provides one PCI-slot for graphics card, it also can support PCI-slot for LAN card
or other devices. The board also provides mini-PCI socket.
7
LV-67A User’s Manual
1.2
General Specification
Form Factor Mini-ITX motherboard
CPU Intel® Core 2 Quad / Core 2 Duo / Celeron processor
With LGA775 socket
Package type: PLGA 775
Front side bus: 800/1066/1333MHZ (200/266/333MHz x 4)
Memory 2 x 240-pin DDR3 800/1066MHz SDRAM up to 4GB
Unbufferred, none-ECC memory supported only
Chipset Intel® Q45 (Northbridge) and ICH10DO (Southbridge)
BIOS Phoenix-Award v6.00PG 8Mb SPI flash BIOS
Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 1.0 and APM version 1.2 compliant
Watchdog Timer System reset programmable watchdog timer with 1 ~ 255 sec./min.
of timeout value
Real Time Clock Intel® ICH10DO built-in RTC with lithium battery
Serial ATAII Intel® ICH10DO integrates 6 Serial ATA II interface
RAID 0, 1,5,10 Intel Matrix Storage Technology supported
Multi-I/O Port
Chipset Intel® 82801HDO( ICH10DO) with Winbond® W83627DHG
Controller
Serial Port Three RS-232 and one RS232/422/485 serial ports
USB Port Eight Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
Floppy Port One slim type Floppy port
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel
GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O
Interface
Smart Fan One CPU fan connectors for fan speed controllable
VGA Display Interface
Chipset Intel® Q45 GMA4500 (Graphic Memory Controller Hub)
Frame Buffer Up to 1024MB shared with system memory
Display Type CRT, LCD monitor with analog display
Onboard 18/24-bit dual channel LVDS interface (LV-67AX)
Onboard DVI interface (LV-67AD/LV-67AD2)
Optional Secondary CRT Connector (LV-67AT)
Connector External DB15 female connector on rear I/O panel
Onboard 40-pin LVDS connector (LV-67AX)
Onboard 26-pin DVI Connector (LV-67AD/L-67AD2)
Onboard 10-pin CRT2 Connector (LV-67AT)
8
LV-67A User’s Manual
Ethernet Interface
Controller Two Intel 82574L Gigabit Ethernet controller
Type Triple speed 10/100/1000Base-T
Auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector Two External RJ45 connectors with LED on rear I/O panel
Audio Interface
Chipset Intel® ICH10DO with Realtek ALC888HD Audio
Intel High Definition Audio compliance
Interface 2 channels sound output
Connector External 3 phone jack for 2 channel audio on rear I/O panel
External SPDIF connector on rear I/O panel
Internal 10-pin header for line-out, MIC-in, 4-pin header for CD-IN
Expansive Interface
Mini PCI One Mini-PCI socket TYPE III A (32-bit, 33MHz)
Power supply: +3.3V, +5V
Power and Environment
Power Standard ATX 24-pin (20-pin is compatible) power supply
Requirement Additional +12V 4-pin power connector
Dimension 170 (L) x 170 (H) mm
O O
Temperature Operating within 0 ~ 60PpC (32 ~ 140PpF)
O O
Storage within –20 ~ 85PpC (-4 ~ 185PpF)
Ordering Code
LV-67AD Onboard VGA, 2 x Intel® Gigabit LAN, 8 x USB2.0, Mini-PCI PCI,
4 x serial Port, 1 x FDD, Realtek ALC888 HD Audio
6 x SATA, 1 x IrDA, 1x DVI Interface
LV-67AD2 Same as LV-67AD with secondary DVI Interface
LV-67AX Same as LV-67AD with 18/24-bits LVDS instead of DVI
LV-67AT Same as LV-67AD with secondary CRT instead of DVI
The specifications may be different as the actual production.
9
SPI
LV-67A User’s Manual
1.3
Intel Core 2 Quad / Core Due with 775 Pin PLGA
CRT1
DVI CH7318
2 x 240-pin DDR3
LVDS CH7308
Intel Q45
800/1066MHz up
to 4GB
CRT2 CH7317
8 x USB2.0 ports 6 x Serial ATAII ports
Intel 82574L
HD Audio ICH10DO
2 x GLAN
Mini-PCI slot
PCI Slot
2 x Serial ports
1 x Floppy port
PCI bus
BIOS
8-bit GPIO
COM3/4
IrDA
10
LV-67A User’s Manual
1.4
Unit: inch
11
LV-67A User’s Manual
Chapter 2
2.1
DDRIIIA/B
ATX
JFRNT
CN_SMBUS
SYSFAN
CN_USB
S_ATA1~6
FDD
PCI
CN_DIO
CN_IR
CN_USB4
CN_DVI2
JAT
CPUFAN
Mini-PCI
CN_12V
CN_AUDIO
CDIN
CN_COM4
CN_DVI1 JCSEL1
JP1/JP2
JCSEL2
COM2+COM3 Audio SPDIF
PS2 USB_RJ45_1/2 COM1 + CRT
12
LV-67A User’s Manual
2.2
Jumper Function
JRTC CMOS Operating/Clear Setting
JVLCD Panel Voltage Setting (LV-67AX)
JP1 COM1 signal mode switch (For Pin-1 & Pin-9)
JP2 COM2 signal mode switch (For Pin-1 & Pin-9)
JAT Power mode select
JCSEL1 CN_COM2 RS-232 RS422 RS485 Setting
JCSEL2
CN_IR IrDA Setting
JAT
3
1
Jumper: JAT
Type: Onboard 3-pin jumper
JAT Mode
1-2 AT Power mode
2-3 ATX Power mode
Default setting
13
LV-67A User’s Manual
2.3
2.3.1
Connector Function Remark
CPU LGA775 CPU socket
DDRIII1/2 240 –pin DDR2 SDRAM DIMM socket
FDD 26-pin slim type floppy connector
S_ATAII1/2/3/4/5/6 7-pin Serial ATA II connector
ATX 24-pin power supply connector
CN_12V 4-pin +12V additional power supply connector
CN_AUDIO 5 x 2-pin audio connector
CDIN 4-pin CD-ROM audio input connector
CN_DIO 6 x 2-pin digital I/O connector
CN_USB1/4 10-pin USB connector
CPUFAN 4-pin CPU cooler fan connector
SYSFAN 3-pin system cooler fan connector
NBFAN 3-pin Northbridge cooler fan connector
CN_IR 5-pin IrDA connector
CN_SMBUS 5-pin SMBUS connector
CN_INV 5-pin LCD inverter connector LV-67AX
CN_LVDS 20 x 2-pin LVDS connector LV-67AX
JFRNT 14-pin front panel switch/indicator connector
PCI1 120-Pin PCI socket
Mini-PCI 1 x Mini-PCI socket
CN_DVI1 26-Smd Pin connector LV-67AD
CN_DVI2 26-Pin connector LV-67AD2
CN_CRT 10-Pin connector LV-67AT
CN_COM2 5 x 2-pin com connector
2.3.2
Connector Function Remark
PS2 PS/2 Keyboard/Mouse connector
CRT+COM1 DB15 VGA + Serial port connector
USB_RJ45_1/2 Dual USB and one RJ45 LAN Port
COM 2/3 Serial port connector
AUDIO Audio connectors
SPDIF SPDIF digital audio output connector
14
LV-67A User’s Manual
2.4
2.4.1
LV-67A has a LGA775 CPU socket onboard; please check following steps to install the
processor properly.
Attention If LV-67A need RMA please Keep CPU socket cover on the CPU Socket.
Warning If CPU Socket internal Pin damage We could not provide warranty.
Intel® Quad Core 2 Quad / Core 2 Duo
Cleron processor
Package type: 775 pin PLGA
FSB:/800/1066/1333MHz
Manufacturing: 65nm / 45nm
Intel Hyper Threading Technology and
Core 2 Duo Quad / Duo supported
Checked point
1. Lift this bar
3. Place the CPU on the top of
2. Uncover this plate
the pins
3. Cover this plate
4. Lock this bar
Notice: Please place the CPU on the pins tenderly to avoid bending the pins
15
LV-67A User’s Manual
2.4.2
LV-67A has two 240-pin DDR3 DIMM support up to 4GB of memory capacity. The memory
frequency supports 800/1066 MHz. Only Non-ECC memory is supported.
DDRIII A/B
96-pin
144-pin
Please check the pin number to match the socket side well
before installing memory module.
16
LV-67A User’s Manual
17
LV-67A User’s Manual
2.5
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
3 1
JRTC
18 CMOS Setup
LV-67A User’s Manual
2.6
LV-67A has Six Serial ATA II interfaces with RAID function, the transfer rate of the Serial
ATA II can be up to 300MB/s. Please go to http://www.serialata.org/ for more about Serial
ATA technology information. Based on Intel® ICH10DO, it supports Intel® Matrix Storage
Technology with combination of RAID 0,1,5 and 10. The main features of RAID on
ICH10DO are listed below:
1. Supports for up to RAID volumes on a single, two-hard drive RAID array.
2. Supports for two, two-hard drive RAID arrays on any of six Serial ATA ports.
3. Supports for Serial ATA ATAPI devices.
4. Supports for RAID spares and automatic rebuild.
5. Supports on RAID arrays, including NCQ and native hot plug.
For more information please visit Intel’s official website.
For more about the system setup for Serial ATA, please check the chapter of SATA
configuration.
SATA1/2/3/4/5/6
Serial ATA installation 19
LV-67A User’s Manual
2.7
LV-67A has one slim type 26-pin floppy interface, it supports notebook use floppy and
powering from onboard, please follow up the steps below to install the device.
FDD
Floppy rear side
4. Lift up this plastic bar
5. Slot the cable in (Blue paste for outside)
6. Press back the plastic bar
1. Lift up the brown plastic bar
2. Slot the cable in (Blue paste for
brown bar side)
3. Press back the plastic bar
20 Floppy Installation
LV-67A User’s Manual
2.8
The board integrates with two Intel 82574L Gigabit Ethernet controllers, as the PCI Express
bus. The Intel 82574L supports triple speed of 10/100/1000Base-T, with IEEE802.3
compliance and Wake-On-LAN supported.
LAN2 LAN1
LAN Installation 21
LV-67A User’s Manual
2.9
Based on Intel Q45 chipset with built-in graphics, the board provides one DB15 Connector
on real external I/O port, or optional Secondary CRT connector (LV-67AT) and One 40-pin
LVDS interface with 5-pin LCD backlight inverter connector. (LV-67AX)
The board also provides 26-pin DVI interface (LV-67AD) or two DVI interface (LV-67AD2)
Notice: When you install any PCI Graphic card, the onboard graphics would be disabled
automatically.
2.9.1
Please connect your CRT or LCD monitor with DB15 male connector to the onboard DB15
female connector on rear I/O port or optional Secondary CRT connector Dip 10 Pin
(LV-67AT)
CRT1
CN_CRT2
9 1
10 2
Connector: CN_CRT2
Type: onboard 10-pin connector for CRT2 (Pitch = 2.00 mm)
Pin Signal Pin Signal
2 CRT2 DDC_DA 1 CRT2 DDC_DC
4 CRT2 R 3 GND
6 CRT2 G 5 CRT2 B
8 CRT2 HSYNC 7 CRT2 VSYNC
10 GND 9 GND
22
LV-67A User’s Manual
2.9.2
The board provides one 40-pin LVDS connector for 18/24-bit dual channel panels, supports
up to 1600 x 1200 (UXGA) of resolution, with one LCD backlight inverter connector and one
jumper for panel voltage setting.
Warning :
Default settings of resolution is 1024 x 768, please offer us panel’s datasheet
to make OEM BIOS with customized made resolution.
39 40
1 2
CN_LVDS
CN_INV
5
JVLCD
6 5
2 1
23
LV-67A User’s Manual
Connector: CN_INV Connector: JVLCD
Type: 5-pin LVDS Power Header Type: 6-pin Power select Header
Pin Description
Pin Description
1-2 LCDVCC (3.3V)
+12V
1
3-4 LCDVCC (5V)
GND
2
5-6 LCDVCC (12V)
GND
3
Default setting: 1-2
GND
4
ENABKL
5
Connector: CN_LVDS
Type: onboard 40-pin connector for LVDS connector
Connector model: HIROSE DF13-40DP-1.25V
Pin Signal Pin Signal
2 LCDVCC 1 LCDVCC
4 GND 3 GND
6 ATX0- 5 BTX0-
8 ATX0+ 7 BTX0+
10 GND 9 GND
12 ATX1- 11 BTX1-
14 ATX1+ 13 BTX1+
16 GND 15 GND
18 ATX2- 17 BTX2-
20 ATX2+ 19 BTX2+
22 GND 21 GND
24 ACLK- 23 BTX3-
26 ACLK+ 25 BTX3+
28 GND 27 GND
30 ATX3- 29 BCLK-
32 ATX3+ 31 BCLK+
34 GND 33 GND
36 N/C 35 N/C
38 N/C 37 N/C
40 N/C 39 N/C
24
LV-67A User’s Manual
To setup the LCD, you need the component below:
1. A panel with LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because
every panel has its own pin assignment, so we do not provide a standard cable; please find a
local cable manufacture to make cables.
LCD Installation Guide:
1. Preparing the LV-67AX, LCD panel and the backlight inverter.
2. Please check the datasheet of the panel to see the voltage of the panel, and set the
jumper JVLCD to +5V +3.3V and 12V.
3. You would need a LVDS type cable.
Panel side
Board side
For sample illustrator only
4. To connect all of the devices well.
25
LV-67A User’s Manual
2.9.3
The board provides optional DVI1-D (LV-67AD) and two DVI (LV-67AD2) interfaces with
Intel Q45, compliant with DVI 1.0 standard.
Connector: CN_DVI1, CN_DVI2
Connector type: 26-pin header connector (pitch = 2.00mm)
Pin Number Assignment Pin Number Assignment
1 TX1+ 2 TX1-
3 Ground 4 Ground
5 TXC+ 6 TXC-
7 Ground 8 PVDD
9 N/C 10 N/C
11 TX2+ 12 TX2-
13 Ground 14 Ground
15 TX0+ 16 TX0-
17 N/C 18 HPDET
19 DDCDATA 20 DDCCLK
21 GND 22 N/C
23 N/C 24 N/C
25 N/C 26 N/C
25 26
CN_DVI2
1 2
CN_DVI1
25 1
26 2
26
LV-67A User’s Manual
2.10
The board integrates onboard audio interface with REALTEK ALC888 codec, with Intel next
generation of audio standard as High Definition Audio, it offers more vivid sound and other
advantages than former HD audio compliance.
The main specifications of ALC888 are:
z High-performance DACs with 100dB S/N ratio
z 2 DAC channels support 16/20/24-bit PCM format for 2 audio solution
z 16/20/24-bit S/PDIF-OUT supports 44.1K/48K/96kHz sample rate
z Compatible with HD
z Meets Microsoft WHQL/WLP 2.0 audio requirements
The board provides 2 channels audio phone jacks on rear I/O port, Line-in/MIC-in ports for
front I/O panel through optional cable.
CN_AUDIO
1
9
10
2
CDIN
4
1
27
LV-67A User’s Manual
Connector: CN_AUDIO
Type: 10-pin (2 x 5) header (pitch = 2.54mm)
Pin Description Pin Description
1 MIC_L 2 Ground
3 MIC_R 4 ACZ_DET
5 Speaker_R 6 MIC Detect
7 SENSE 8 N/C
9 Speaker_L 10 Speaker Detect
Connector: CDIN
Type: 4-pin header (pitch = 2.54mm)
Pin Description
1 CD – Left
2 Ground
3 Ground
4 CD – Right
LINE-IN
Rear I/O phone jacks
LINE-OUT
MIC-IN
28
LV-67A User’s Manual
2.11
The board provides a programmable 8-bit digital I/O interface, and a SMBUS (System
management bus) interface for control panel application.
Connector: CN_DIO
Type: onboard 2 x 6-pin header, pitch=2.0mm
Pin Description Pin Description
1 Ground 2 Ground
3 GP10 4 GP14
5 GP11 6 GP15
7 GP12 8 GP16
9 GP13 10 GP17
11 VCC 12 +12V
CN_SMBUS
1
5
CN_DIO
11
12
2 1
Connector: CN_SMBUS
Type: 5-pin header for SMBUS Ports
Pin Description
1 VCC
2 N/C
3 SMBDATA
4 SMBCLK
5 Ground
29
LV-67A User’s Manual
2.12
LV-67A integrates eight USB2.0 ports. The specifications of USB2.0 are listed below:
Interface USB2.0
Controller Intel ICH10DO
Transfer Rate Up to 480Mb/s
Voltage 5V
The Intel® ICH10DO contains two Enhanced Host Controller Interface (EHCI) and five
Universal Host Controller Interfaces (UHCI), it can determine whether your connected
device is for USB1.1 or USB2.0, and change the transfer rate automatically.
USB3/4/5/6
30
LV-67A User’s Manual
Connector: CN_USB
Type: 10-pin (5 x 2) header for USB5/6 Ports
Pin Description Pin Description
1 VCC 2 VCC
3 Data0- 4 Data1-
5 Data0+ 6 Data1+
7 Ground 8 Ground
9 Ground 10 N/C
CN_USB1
10 9
2 1
CN_USB4
1
9
10 2
31
LV-67A User’s Manual
2.13
The LV-67A provides a standard ATX power supply with 24-pin ATX connector and
additional 12V connector, and the board provides one 4-pin fan connectors supporting
smart fan for CPU cooler and one 3-pin cooler fan connectors for system and Northbridge
chip. The 4-pin CN_12V additional power connector is necessary for CPU powering; please
connect this well before you finishing the system setup.
2
24
23 1
ATX
SYSFAN
3
1
CPUFAN
1
4
CN_12V
4 3
2 1
32
LV-67A User’s Manual
Connector: ATX
Type: 24-pin ATX power connector
PIN assignment
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 5V 16 PS_ON
5 GND 17 GND
6 5V 18 GND
7 GND 19 GND
8 PW_OK 20 -5V
9 5V_SB 21 5V
10 12V 22 5V
11 12V 23 5V
12 3.3V 24 GND
Connector: CN_12V
Type: 4-pin standard Pentium 4 additional +12V power connector
Pin Description Pin Description
1 Ground 2 Ground
3 +12V 4 +12V
Connector: CPUFAN
Type: 4-pin fan wafer connector
Pin Description Pin Description
1 Ground 2 +12V
3 Fan Speed Detection 4 Fan Control
Connector: SYSFAN
Type: 3-pin fan wafer connector
Pin Description Pin Description Pin Description
1 Ground 2 +12V 3 Sense
33
LV-67A User’s Manual
2.14
The board supports Three RS232 serial port and one jumper selectable RS232/422/485
serial ports. The jumper JCSEL1 & JCSEL2 can let you configure the communicating
modes for COM2.
COM1 COM3
COM2
Connector: COM2
Type: 9-pin D-sub male connector on bracket for COM2
Pin Description Pin Description
1 DCD/422TX-/485- 2 RXD/422TX+/485+
3 TXD/422RX+ 4 DTR/422RX-
5 GND 6 DSR
7 RTS 8 CTS
9 RI 10 N/C
34
LV-67A User’s Manual
Setting RS-232 & RS-422 & RS-485 for COM2C
JP1 JP2
1 5 5 1
JCSEL1
7 1
2 2 6 6
8 2
CN_COM4
1
9
JCSEL2
1
11
10 2
2
12
35
LV-67A User’s Manual
Function JCSEL1 JCSEL2
1
7 1 11
SIR
8 2 2
12
1
11
1
7
RS-485
8 2
12 2
1
7 1 11
RS-422
8 2
12 2
1
11
7 1
RS-232
2
8 2 12
Default setting:
JCSEL1: (1-2) JCSEL2: (1-3, 2-4, 7-9, 8-10)
Jumper: JP1/JP2 (COM1/2)
Type: onboard 6-pin header
Power Mode JP1/JP2
1 5
Pin 1 with 5V Power 1-3,4-6
2 6
1
5
Pin 9 with 12V Power 2-4,3-5
2 6
Default setting: 3-5, 4-6
36
LV-67A User’s Manual
2.15
The JFRNT provides front control panel of the board, such as power button, reset and
beeper, etc. Please check well before you connecting the cables on the chassis.
Connector: JFRNT
Type: onboard 14-pin (2 x 7) 2.54-pitch header
Function Signal PIN Signal Function
HDLED+ 1 2 PWDLED+
IDE LED Power
HDLED- 3 4 N/C
LED
Reset+ 5 6 PWDLED-
Reset
Reset- 7 8 SPKIN+
N/C 9 10 N/C
Speaker
PWRBT+ 11 12 N/C
Power
Button
PWRBT- 13 14 SPKIN-
JFRNT
13
14
2
1
37
LV-67A User’s Manual
(This Page is Left for Blank)
38
LV-67A User’s Manual
Chapter 3
3.1
SATA Mode:
This option can let you select whether the Serial ATA hard drives would work under normal
IDE mode or RAID mode. The RAID mode need more than one HDD is applied.
39
LV-67A User’s Manual
3.2
The board integrates Intel® ICH10DO with RAID function for Serial ATA II drives, and
supports the configurations below:
RAID 0 (Stripping): Two hard drives operating as one drive for optimized data R/W
performance. It needs two unused drives to build this operation.
RAID 1 (Mirroring): Copies the data from first drive to second drive for data security, and if
one drive fails, the system would access the applications to the workable drive. It needs two
unused drives or one used and one unused drive to build this operation. The second drive
must be the same or lager size than first one.
RAID 5 (striping with parity)
A RAID 5 array contains three or more hard drives where the data is divided into
manageable blocks called strips. Parity is a mathematical method for recreating data that
was lost from a single drive, which increases fault-tolerance. The data and parity are striped
across all the hard drives in the array. The parity is striped in a rotating sequence to reduce
bottlenecks associated with the parity calculations.
RAID 10 (RAID 0+1)
A RAID 10 array uses four hard drives to create a combination of RAID levels 0 and 1. The
data is striped across a two-drive array forming the RAID 0 component. Each of the drives
in the RAID 0 array is then mirrored by a RAID 1 component.
Intel Matrix Storage Technology: This technology would allow you to use RAID 0+1 mode
on only two drives (4 drives needed on traditional RAID 0+1). It will create two partitions on
each hard drive to simulate RAID 0 and RAID 1. It also can let you modify the partition size
without re-formatted.
For more information of Intel Matrix Storage Technology, please visit Intel’s website.
If you need to install an operation system on the RAID set, please use the driver disk
attached in the package when it informs you to obtain the RAID drivers.
40
LV-67A User’s Manual
Please press to enter the RAID configuration menu.
You can setup the RAID under operation system for Microsoft® Windows XP SP1 or
Windows 2000 SP4 version, please install the Intel® Application Accelerator Ver.4.5 later to
support RAID configuration with Intel® Matrix Storage Technology.
41
LV-67A User’s Manual
1. After installing Intel Application Accelerator, please execute Intel® Storage Utility.
Demo configuration for 2 SATA Drives and
set as Intel Matrix Storage Technology set
2. Select Actions to Create RAID Volume
Rename the Volume name
Select RAID Level as 0
Left as default
42
LV-67A User’s Manual
3. Please select two hard drives to prepare to set the RAID volume
4. Specify the Volume size
Tune this bar to specify
the volume size, if you
specify the volume size
lower than maximum,
you can create a second
volume for another
RAID set.
(Make RAID 0+1 on only
two hard drives)
5. Repeat the step 1 to create second volume as RAID Level 1.
For other configuration set please click Help on tool bar.
43
LV-67A User’s Manual
3.3
The board integrates Intel® ICH10DO with REALTEK® ALC888 codec. It can support
2-channel sound under system configuration. Please follow the steps below to setup your
sound system.
1. Install REALTEK HD Audio driver.
2. Lunch the control panel and Sound Effect Manager.
3. Select Speaker Configuration
4. Select the sound mode to meet your speaker system.
44
LV-67A User’s Manual
3.4
Based on Intel® Q45 chipset with GMA (Graphic Media Accelerator) 4500, the board
supports Intel® DVMT (Dynamic Video Memory Technology) 3.0, which would allow the
video memory be triggered up to 384MB.
To support DVMT, you need to install the Intel GMA4500 Driver with supported OS.
BIOS Setup:
On-Chip Frame Buffer Size:
This item can let you select video memory which been allocated for legacy VGA and SVGA
graphics support and compatibility. The available option is 32MB and 128MB.
45
LV-67A User’s Manual
Total GFX Memory Size:
This item can let you select a static amount of page-locked graphics memory; which will be
allocated during driver initialization. Once you select the memory amount, it will be no
longer available for system memory.
DVMT Memory Size:
This item can let you select a maximum size of dynamic amount usage of video memory,
the system would configure the video memory depends on your application, this item is
strongly recommend to be selected as MAX DVMT.
Fixed + DVMT Memory Size:
You can select the fixed amount and the DVMT amount at the same time for a guaranteed
video memory and additional dynamic video memory
Notice:
1. The On-Chip Frame Buffer Size would be included in the Total GFX Memory Size.
46
LV-67A User’s Manual
3.5
Based on Intel Q45 GMCH with GMA3000 (Graphic Media Accelerator), the board supports
two DACs for display device as different resolution and color bit.
Please install the Intel Graphic Driver before you starting setup display devices.
1. Click right button on the desktop to lunch display properties
2. Click Advanced button for more specificity setup.
Click Graphics Properties... for
advanced setup
3. This setup options can let you define each device settings.
47
LV-67A User’s Manual
Click Monitor to setup the CRT
monitor for Colors, Resolution
and Refresh Rate
Click Intel® Dual Display
Clone to setup the dual
display mode as same screen
Set the main display device here
Click Extended Desktop to
setup the dual display mode
as different screen display
48
LV-676 User’s Manual
Chapter 4
The motherboard uses the Award BIOS for the system configuration. The Award
BIOS in the single board computer is a customized version of the industrial standard
BIOS for IBM PC AT-compatible computers. It supports Intel x86 and compatible CPU
architecture based processors and computers. The BIOS provides critical low-level
support for the system central processing, memory and I/O sub-systems.
The BIOS setup program of the single board computer let the customers modify the
basic configuration setting. The settings are stored in a dedicated battery-backed
memory, NVRAM, retains the information when the power is turned off. If the battery
runs out of the power, then the settings of BIOS will come back to the default setting.
The BIOS section of the manual is subject to change without notice and is provided here
for reference purpose only. The settings and configurations of the BIOS are current at
the time of print, and therefore they may not be exactly the same as that displayed on
your screen.
To activate CMOS Setup program, press ＜DEL＞ key immediately after you turn on
the system. The following message “Press DEL to enter SETUP” should appear in the
lower left hand corner of your screen. When you enter the CMOS Setup Utility, the Main
Menu will be displayed as Figure 4-1. You can use arrow keys to select your function,
press ＜Enter＞ key to accept the selection and enter the sub-menu.
Figure 4-1 CMOS Setup Utility Main Screen
49
LV-674 User’s Manual
(This Page is Left for Blank)
50
LV-67A User’s Manual
Appendix A
A.1
17
Connector: S_ATA1/2/3/4/5/6
Type: 7-pin wafer connector
1 2 3 4 5 6 7
GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND
A.2
Connector: FDD
Type: 26-pin connector
Pin Description Pin Description
1 VCC 2 INDEX
3 VCC 4 DRV0
5 VCC 6 DSKCHG
7 DRV1 8 N/C
9 MTR1 10 MTR0
11 RPM 12 DIR
13 N/C 14 STEP
15 Ground 16 WRITE DATA
17 Ground 18 WRITE GATE
19 N/C 20 TRACK 0
21 N/C 22 WRPTR
23 Ground 24 RDATA-
25 Ground 26 SEL
51
LV-67A User’s Manual
A.3
Connector: CN_IR
1
Type: 5-pin header for SIR Ports
5
Pin Description
1 VCC
2 N/C
3 IRRX
4 Ground
5 IRTX
A.4
1
6
2
7
3
8
4
Connector: COM1/2/3
9
5
Type: 9-pin D-sub male connector on bracket
Pin Description Pin Description
1 DCD 6 DSR
2 SIN 7 RTS
3 SO 8 CTS
4 DTR 9 RI
5 Ground
1
9
10 2
Connector: COM4
Type: 9-pin header connector for COM4
Pin Description Pin Description
1 DCD 6 DSR
2 SIN 7 RTS
3 SO 8 CTS
4 DTR 9 RI
5 Ground
52
LV-67A User’s Manual
A.5
6
1
11
2
12
Connector: CRT1
3
13
Type: 15-pin D-sub female connector on bracket
4
14
5
15
10
Pin Description Pin Description Pin Description
1 RED 6 Ground 11 N/C
2 GREEN 7 Ground 12 DDC_DA
3 BLUE 8 Ground 13 HSYNC
4 N/C 9 +5V 14 VSYNC
5 Ground 10 Ground 15 DDC_CLK
A.6
Connector: RJ451/2
Type: RJ45 connector with LED on bracket
Pin 1 2 3 4 5
Description TRD0+ TRD0-TRD1+TRD2+TRD2-
Pin 6 7 8 9 10
Description TRD1- TRD3+TRD3- NC NC
53
LV-67A User’s Manual
Appedix B
B.1
54
LV-67A User’s Manual
55
LV-67A User’s Manual
B.2
56
LV-67A User’s Manual
B.3
57
LV-67A User’s Manual
Appedix C
C.1
The board is based on Award BIOS and can be updated easily by the BIOS auto flash
tool. You can download the tool online at the address below:
TUhttp://www.award.comUT
TUhttp://www.commell.com.tw/support/support.htmUT
File name of the tool is “awdflash.exe”, it’s the utility that can write the data into the BIOS
flash ship and update the BIOS.
C.2
1. Please make a bootable floppy disk.
2. Get the last .bin files you want to update and copy it into the disk.
3. Copy awardflash.exe to the disk.
4. Power on the system and flash the BIOS. (Example: C:/ awardflash XXX.bin)
5. Re-star the system.
Any question about the BIOS re-flash please contact your distributors or visit the
web-site at below:
http://www.commell.com.tw/support/support.htm
58
LV-67A User’s Manual
Appendix D
The GPIO’can be programmed with the MSDOS debug program using simple
IN/OUT commands.The following lines show an example how to do this.
GPIO0…..GPIO7 bit0……bit7
-o 2E 87 ;enter configuration
-o 2E 87
-o 2E 07
-o 2F 09 ;enale GPIO function
-o 2E 30
-o 2F 02 ;enable GPIO configuration
-o 2E F0
-o 2F xx ;set GPIO as input/output; set ‘1’ for input,’0’for output
-o 2E F1
-o 2F xx ;if set GPIO’s as output,in this register its value can be set
Optional :
-o 2E F2
-o 2F xx ; Data inversion register ; ‘1’ inverts the current valus of the bits ,’0’
leaves them as they are
-o 2E 30
-o 2F 01 ; active GPIO’s
For further information ,please refer to Winbond W83627DHG datasheet.
59
LV-67A User’s Manual
Appendix E
The watchdog timer makes the system auto-reset while it stops to work for a period. The
integrated watchdog timer can be setup as system reset mode by program.
Timeout Value Range
- 1 to 255
- Second or Minute
Program Sample
Watchdog timer setup as system reset with 5 second of timeout
2E, 87
2E, 87
2E, 07
2F, 08 Logical Device 8
2E, 30 Activate
2F, 01
2E, F5 Set as Second*
2F, 00
2E, F6 Set as 5
2F, 05
* Minute: bit 3 = 0; Second: bit 3 = 1
You can select Timer setting in the BIOS, after setting the time options, the system will
reset according to the period of your selection.
60
LV-67A User’s Manual
Contact Information
Any advice or comment about our products and service, or anything
we can help you please don’t hesitate to contact with us. We will do
our best to support you for your products, projects and business.
Taiwan Commate Computer Inc.
Address 19F, No. 94, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City
22102, Taiwan
TEL +886-2-26963909
FAX +886-2-26963911
Website TUhttp://www.commell.com.twUT
E-Mail TUinfo@commell.com.twUT (General Information)
TUtech@commell.com.twUT (Technical Support)
Facebook https://www.facebook.com/pages/Taiwan-Commate-Computer-Inc/547993955271899
Twitter https://twitter.com/Taiwan_Commate
Commell is a brand name of Taiwan commate computer Inc.
Contact Information 61
Manufacturers
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods