Manufacturers
COMMELL LV-671ZNSMP
Description
Commell LV-671ZSMP - Mini-ITX Embedded Intel Celeron M processor Motherboard with Intel Extreme VGA, LAN, 5.1-CH/SPDIF Audio, USB 2.0, mini-PCI and LVDS
Part Number
LV-671ZNSMP
Price
Request Quote
Manufacturer
COMMELL
Lead Time
Request Quote
Category
Single Board Computers
Specifications
Form Factor
Mini ITX
Mini-ITX form factor at 170 x 170 mm
Ethernet Chipset
Intel 82541PI
Audio
Intel® ICH4 with onboard ACL650 AC97 3D audio codec 5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface
Board Type
Mini-ITX
Chipset
Intel® 82852GM GMCH and 82801DB ICH4
CPU
Onboard Intel® ULV Celeron M 600Mhz @ 400 MHz FSB uFCBGA CPU
Environment
Power Requirement: Single 19V 6A DC input or 12V 10A DC input Board Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor Operation Temperature: 0 ~ 60oC (32 ~ 140oF)
Expansions
One 32-bit PCI slot supports 2 bus master PCI via riser card, and Mini-PCI or Mini-AGP port can be used optionally.
External Card
Back panel : PS/2 keyboard and mouse port, VGA, parallel port, Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0, DC power input. Front panel : MIC, Line in & earphone or Central/Base, Rear & Front audio outputs and 2 x Dual USB port
IDE
Dual UltraATA/100 bus master IDE channels Support up to 4 ATAPI devices on 40-/44-pin IDE ports Jumper selectable Vcc power output on 40-pin IDE1 for power cable free DiskOnModule flash disk
LAN
Intel® 82541PI Gigabit Mbps Ethernet interface
LVDS
Intel® 852GM GMCH built-in Intel® Extreme Graphics 2 with onboard Chrontel CH7017A built-in LVDS transmitter Resolution up to 1400 x 1050 SXGA+ Support 24-bit Dual channel LVDS TFT LCD Onboard 20-pin Hirose DF13-20DP-1.25V connector
Memory
One 184-pin DIMM socket Support up to 1 GBytes DDR 266 SDRAM
Multi I/O
2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x FDD, 1 x PS/2 keyboard and mouse port.
PCI
PCI RICOH R5C475II PCMCIA PC card / CardBus controller Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification 16-/32-bit data bus, support hot swap function Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card One PCMCIA type-I/II slot
Power consumption
ACPI 1.0 compliant, supports power saving mode with ATX PSU
Processor
Intel Celeron M
RTC
Intel® ICH4 built-in RTC with onboard lithium battery
SSD
CompactFlash Card CompactFlash socket supports CompactFlash Card (CFC) Support PIO mode 4 up to 16.6 MBytes of data transfer rate Default setting as secondary IDE port at master mode Bootable, driver free IDE-based flash disk Flash memory capacity up to 1 G Bytes (and beyond) DiskOnModule Flash Disk IDE-based, bootable, driver free DiskOnModule flash disk PIO mode 4 with 16.6 Mbps of data transfer rate Flash memory capacity up to 1 GB ytes (and beyond)
Tv-out
Intel® 852GM GMCH built-in Intel® Extreme Graphics 2 with MA-SDTV Mini-AGP add on card
USB
Intel® ICH4 chipset built-in Hi-Speed USB 2.0 interface with 480 Mbps of data transfer rate and bootable setting in BIOS
VGA
Intel® 852GM GMCH built-in Intel Extreme Graphics 2 with 266 MHz VGA core and 256-bit 3D engine Intel® Dynamic Video Memory up to 64 MB shared with system External DB15 female connector on rear I/O panel
Watchdog Timer
Programmable generates NMI or system reset watchdog timer with 1 to 255 sec. / min. of time out value
Features
- External DC jack with +12V or +19V DC input (with external AC/DC adapter)
- High memory capacity with 1 GB DDR 266 SDRAM
- IDE-based DiskOnModule and CompactFlash embedded flash disk interface
- Integrated AC97 3D 5.1-Channel & S/P DIF audio interface
- Integrated Intel 82540EM Gigabit Ethernet interface
- Intel 852GM GMCH built-in Intel Extreme Graphics 2 with 266 MHz VGA core, 256-bit 3D/2D graphic engine and Intel Dynamic Video Memory Technology up to 64 MB shared with system memory
- Mini-AGP socket supports DVI / HDTV (Intel 852GM basis) and 4xAGP VGA add-in module (Intel 852GM basis)
- Onboard Intel Celeron M 600MHz @400MHz FSB uFCBGA CPU
- Onboard single / dual channel 18-/24-bit LVDS interface for TFT LCD
- One 40-pin and one 44-pin IDE port for both of desktop and slim type ATAPI devices
- PCI, Mini-PCI, and PCMCIA type-III PC card interface
- Ultra compact MiniITX form factor at 170 x 170mm (W x L) of dimension
Datasheet
Extracted Text
Distribue par Anteor - www.anteor.com - Tel : 01 61 37 07 00 Industrial Single Board Computer Mini-ITX motherboard LV-668 AMD Geode NX Platform Onboard VGA, LAN, SATA, USB2.0, Serial Port AC97 5.1 Channel Audio Form Factor Mini-ITX compact motherboard CPU AMD Geode NX Processors NX 1250@6W/1500@6W Processors supported Fanless with CPU heatsink 1 x 184-pin DDR SDRAM up to 2GB Memory Chipset VIA KM400A & VT8237R Chipset integrated RTC with onboard lithium battery Real Time Clock Power Management ACPI 1.0 compliant, supports power saving mode with ATX PSU One UltraATA/100 IDE channels up to 2 ATAPI devices PCI Enhanced IDE Onboard 1 x 40-pin IDE connectors VGA Interface VIA KM400A integrates S3 Graphics UniChrome IGP graphics core MPEG-II hardware accelerator integrated Up to 64MB shared with system memory Video Memory Serial ATA interface 2 x Serial ATA interface with 150MB/s transfer rate RAID 0/1 supported VIA VT8237R integrates with REALTEK ALC655 AC97 5.1CH codec Audio Interface LAN Interface 1 x AMD NetPHY 10/100Mbps PHY 1 x Onboard PCI slot Extended Interface External I/O Port 1 x RJ45 LAN ports, 1 x DB15 VGA port and 1 x PS/2 Keyboard/Mouse Port, 1 x RS232 Serial Ports, 1 x S/PDIF, 2 x USB2.0 ports, 1x Parallel Port Line-out/Front, Line-in/Rear and MIC-in/Center 1 x IrDA 2 x USB2.0 port Internal I/O ports Power Requirement Standard 20-pin ATX power supply 170mm x 170 mm (L x W) Board Dimension Operation Operating within 0~60 centigrade Temperature Storage within -20~85 centigrade Distribue par Anteor - www.anteor.com - Tel : 01 61 37 07 00 Ordering Code LV-668 AMD Geode NX processors Mini-ITX motherboard with onboard VGA, LAN, SATA, USB 2.0 Ports, Audio, 1 x RS232 serial port, S/PDIF LV-668-12 Same as LV-668 and with AMD Geode NX 1250 processor LV-668-15 Same as LV-668 and with AMD Geode NX 1500 processor For further product information please visit the website at http://www.commell.com.tw Taiwan Commate Computer Inc. 8F, NO. 94, Sec. 1, Shin Tai Wu Rd., Hsi Chih, Taipei Shien, Taiwan. TEL: +886-2-26963909 Website:www.commell.com.tw FAX: +886-2-26963911 E-mail:info@commell.com.tw
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the LV-671ZNSMP?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods