Industrial Trading

Description

Full-size PICMG Pentium 4 DDR CPU Card with 4xAGP 3D SVGA/64 MB DDR VRAM Dual Intel LAN, PC/104-plus, DiskOnChip Interfaces and ISA 64mA High Drive Capacity

Part Number

FS-976VL2S

Price

Request Quote

Manufacturer

COMMELL

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

PICMG
Full-size PICMG (PCI/ISA)-bus CPU Card / Slot PICMG version 1.0 (Rev. 2.0) and PCI version 2.0 compliant with 4 x 32-bit bus master PCI and 8/16-bit ISA bus interface

Ethernet Chipset

Intel 82559

System Chipset

Intel MCH

Video Chipset

SiS 315

Board Dimension

338 x 122 mm (L x W)

Chipset

Intel 845E chipset with 82845E MCH and 82801BA ICH2

CPU

Socket 478 Intel Pentium 4 / Celeron CPU up to 3.06 GHz @ 533 / 400 MHz FSB. Support Intel 0.13- / 0.18-micron Northwood / Willamette CPU. Support Intel Hyper-Threading Technology

ISA High Drive

64mA ISA high drive capacity with TI 245 buffer. on the ISA address and data bus

LAN Interface

Dual Intel PRO/100+ 10/100 Mbps Fast Ethernet interface. 10/100Base-TX auto-switching, IEEE802.3U compliant. Primary LAN with Intel ICH2 and 82562ET Phy. Optional secondary LAN with PCI Intel 82559ER. External dual RJ45 connector with LED on bracket

Memory

Two 184-pin DIMM sockets. Support up to 2 GB DDR200/266 SDRAM with ECC (No-register)

Multi-I/O Port

Intel ICH2 and LPC Winbond W83627HF-AW super-I/O controller, 2 x RS-232 serial ports, 1 x SPP/EPP/ECP parallel port, 2 x USB ports with USB 1.1 compliant, IrDA port, Floppy port, AT keyboard, PS/2 keyboard / mouse port

Operation Temperature

0 ~ 60oC (32 ~ 140oF)

PC/104-Plus Interface

32-bit PCI-based PC/104-plus embedded peripheral interface

PCI Enhanced IDE

Dual UltraATA/100 bus master IDE channels. Support up to 4 ATAPI devices on two 40-pin IDE ports. Jumper selectable Vcc power output on IDE2 for DiskOnModule

Power Management

ACPI 1.0 compliant, supports power saving mode with ATX PSU

Power Requirement

+5V, +12V, -12V (5Vsb for ATX mode) with Intel P4 additional +12V power input

Processor

Intel Pentium 4

Real Time Clock

Intel ICH2 built-in RTC with onboard lithium battery

Solid State Disk DiskOnChip)

M-systems DiskOnChip socket supports DiskOnChip2000 32-pin DIP JEDEC single chip flash disk. Flash memory capacity up to 1 GBytes with ECC / EDC. 8 KBytes of memory window

VGA Interface

4xAGP SiS315 VGA controller with 256-bit 3D engine. Onboard 64 MBytes DDR SGRAM independent video memory. External DB15 female connector on bracket. Internal 16-pin header connector

Watchdog Timer

Programmable generates NMI or system reset watchdog timer with 1 to 255 sec. / min. of time out value

Features

High memory capacity with 2 GB DDR200/266 (PC1600/2100) SDRAM
High reliability / high compatibility / long term supply Intel 82845E MCH and 82801DB ICH2 solution
Integrated advanced 4xAGP SVGA controller with 256-bit 3D engine and onboard 64 MB DDR SGRAM video memory
Integrated dual Intel PRO/100+ 10/100 Mbps Fast Ethernet interfaces for redundant, double speed and external / internal networking applications
Integrated SSD (Solid State Disk) interface with M-systems DiskOnChip embedded flash disk
ISA high drive capacity with enhanced 64mA on data and address bus
PC/104-plus flexible embedded peripheral expansive interface
Pentium 4 additional +12V power free for standard ATX power supply (with the power from backplane only)
Powerful computing capacity with Intel mPGA478 Pentium 4 / Celeron CPU at 533/400 MHz of FSB with Intel NetBurst micro-architecture

Datasheet

COMMELL-FS-976-datasheet.pdf

53 KiB

Download

Extracted Text

Advanced Pentium 4 DDR Platform Intel Pentium 4 CPU @ 533 FSB with DDR Solution Onboard 64 MB DDR SGRAM for Frame Buffer 4xAGP SVGA Controller with 256-bit 3D Engine Onboard 64 MB DDR SGRAM Video Memory IDE-free Solid State Disk Interface 576 MB Flash Memory Capacity PC/104-plus Interface Supports Embedded Peripheral Module Dual Intel PRO/100+ 10/100 Mbps LAN mPGA478 Socket Intel Pentium 4 CPU up to 3.06+ GHz @ 533 FSB ISA 64mA High Drive Capacity with Intel Hyper Threading FS-976 Features - Intel Socket 478 Pentium 4 / Celeron CPU @ 533/400 MHz FSB up to 3.06+ GHz with Intel Hyper Threading Technology - Memory Capacity up to 2 GBytes DDR200/266 SDRAM with ECC - Powerful 4xAGP SVGA Controller with built-in 256-bit 3D Engine and Onboard 64 MB DDR SGRAM Independent Video Memory - Powerful Network Capacity with Dual Intel PRO/100+ LAN Interface - PC/104-plus Interface supports Add-in Multiple LAN, Ultra160 SCSI, IDE Adapter, IDE RAID, and Other PCI-based Peripheral Modules - M-systems DiskOnChip Single Chip Solid State Flash Disk Interface - ISA 64mA High Drive Capacity for CT Server and Multiple ISA Platform Industrial Pentium 4 CPU Card 533MHz FSB, DDR and 64 MB DDR SGRAM FS-976 Full-size PICMG Pentium 4 DDR CPU Card with 4xAGP 3D SVGA/64 MB DDR VRAM Dual Intel LAN, PC/104-plus, DiskOnChip Interfaces and ISA 64mA High Drive Capacity Form Factor Full-size PICMG-bus CPU Card / Slot PC PICMG version 1.0 (Rev. 2.0) and PCI version 2.0 compliant CPU Intel Socket 478 Pentium 4 / Celeron CPU @ 400/533 MHz FSB up to 3.06 GHz and above with Intel Hyper Threading Technology Intel 0.13/0.18-micron Northwood / Willamette Pentium 4 CPU supported Memory 2 GBytes DDR SDRAM on 2 x 184-pin DIMM sockets with ECC supported Chipset Intel Brookdale-E chipset with 82845E MCH and 82801BA ICH2 Watchdog Timer Generates NMI or system reset with 1 to 255 sec. / min. of time out value Real Time Clock Intel ICH2 integrated RTC with onboard lithium battery ISA High Drive ISA 64mA high drive capacity with TI 245 buffer on address and data bus PCI Enhanced IDE Dual UltraATA/100 bus master IDE channels up to 4 ATAPI devices IDE2 supports +5V Vcc for additional DiskOnModule (DOM) flash disk VGA Interface Integrated SiS315 4xAGP SVGA with 256-/128-bit 3D/2D engine Onboard 64 MBytes DDR SGRAM independent video memory External DB15 female connector on bracket and internal 16-pin header LAN Interface Integrated dual Intel PRO/100+ LAN interfaces, IEEE802.3U compliant 1st LAN with Intel ICH2 and 82562ET, 2nd LAN with Intel 82559ER External dual RJ45 connectors on bracket PC/104+ Interface One 120-pin 32-bit PCI-based embedded PC/104-plus module connector supports up to 3 PC/104-plus add-in modules (SCSI, Multiple LAN, and others) Multi-I/O Port 1 x RS-232 and 1 x RS-232/422/485 serial ports 2 x USB ports with USB verison 1.1 compliant 1 x SPP/EPP/ECP parallel port 1 x IrDA port, 1 x FDD port 1 x external PS/2 keyboard / mouse and 1 x internal AT keyboard port Solid State Disk Onboard 32-pin DIP JEDEC DiskOnChip socket Flash memory capacity up to 1GBytes with ECC/EDC data protection Environment Power Requirement: +5V, +12V, -12V (P4 additional +12V power free) Board Dimension: 338 x 122 mm (L x W) o o Operation Temperature: 0 ~ 60 C (32 ~ 140 F) Ordering Code FS-976VL with VGA, 64MB DDR SGRAM, Intel LAN FS-976VL2 Same as FS-976VL but with Dual Intel LAN and PC/104+

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products