TR10R060-12A03 - CINCON ELECTRONICS

Description

Cincon TR10R060-12A03(ROHS) Adapter - Interchangeable Plug Adapters 6VDC 2.5mm DC

Part Number

TR10R060-12A03

Price

Request Quote

Manufacturer

CINCON ELECTRONICS

Lead Time

Request Quote

Category

Adapters

Specifications

Altitude

2000m

Conducted EMI

CISPR/FCC Class B

Cooling

Natural Convection

Dimensions

2.835x1.811x1.378Inches (72.00x46.00x35.00mm)

Efficiency (Typ)

68%

Emission and Immunity

EN55022 Class B, FCC Part 15 Class B, EN61000-6-3, EN61000-3-2, EN61000-3-3, EN55024, EN61204-3, EN61000-6-1

Holdup Time

10ms typ. @115Vac

Humidity

93% RH max. Non condensing

Input Current

0.4A max.

Input Frequency

47 to 63Hz

Input Voltage

90~264Vac

Inrush Current

40A max. @240Vac

Isolation

Input to output is 4,242VDC

Leakage Current

0.25mA max.

Line Regulation

±1%

Load Regulation

±3%

Max Load

1500mA

Min Load

MTBF

MIL-HDBK-217F, GB, 25°C/115VAC:200K hrs min.

Output Voltage

Over Current Protection

Constant Current type

Ripple & Noise

Safety

IEC60950-1, EN60950-1, UL60950-1

Short Circuit Protection

Continuous(Auto Recovery)

Switching Frequency

40KHz Typical

Temperature

Operating:0 ~ 60°C(see derating curve); Storage:-20~85°C

Temperature Coefficient

±0.05%/°C

Voltage Accuracy

±2%

Weight

155g(0.34 Pounds)

Datasheet

Cincon=EC4A07(ROHS)=datasheet1-154329403.pdf

166 KiB

Download

Extracted Text

EC4A SERIES 5-6 WATT 2:1 INPUT RANGE ︳ DC-DC CONVERTERS FEATURES * 5-6W Isolated Output * 24-Pin DIP Package * Efficiency to 87% * 2:1 Input Range * Regulated Outputs * Pi Input Filter * Continuous Short Circuit Protection * Meet EMI EN55022 class A (“-E” model) * No Tantalum Capacitor inside (“-E” model) * Wide Operating Temperature Range (“-E” model) * UL60950-1 Approval for H/HM Versions only and “-E” Model OUTPUT INPUT CURRENT (3) % EFF. MODEL INPUT OUTPUT CAPACITOR CURRENT (1) (2) NO LOAD FULL LOAD NUMBER VOLTAGE VOLTAGE LOAD MAX. “-E” “-E” “-E” “-E” EC4A01 9-18 VDC 5 VDC 1000 mA 1000 mA 7.5 mA 7.5 mA 541 mA 514 mA 77 81 4700uF EC4A02 9-18 VDC 12 VDC 470 mA 500 mA 7.5 mA 10 mA 573 mA 595 mA 82 84 4700uF EC4A03 9-18 VDC 15 VDC 400 mA 400 mA 7.5 mA 15 mA 625 mA 588 mA 80 85 4700uF EC4A04 9-18 VDC ±12 VDC ±230 mA ±250 mA 12 mA 12 mA 554 mA 588 mA 83 85 2200uF EC4A05 9-18 VDC ±15 VDC ±190 mA ±200 mA 12 mA 18 mA 556 mA 588 mA 81 85 2200uF EC4A06 9-18 VDC ±5 VDC ±500 mA ±500 mA 12 mA 12 mA 541 mA 514 mA 77 81 2200uF EC4A07 9-18 VDC 3.3 VDC 1000 mA 1200 mA 7.5 mA 7.5 mA 382 mA 429 mA 72 77 4700uF EC4A11 18-36 VDC 5 VDC 1000 mA 1000 mA 5 mA 5 mA 260 mA 251 mA 80 83 4700uF EC4A12 18-36 VDC 12 VDC 470 mA 500 mA 5 mA 8 mA 280 mA 291 mA 84 86 4700uF EC4A13 18-36 VDC 15 VDC 400 mA 400 mA 5 mA 8 mA 298 mA 287 mA 84 87 4700uF EC4A14 18-36 VDC ±12 VDC ±230 mA ±250 mA 7.5 mA 8 mA 280 mA 291 mA 82 86 2200uF EC4A15 18-36 VDC ±15 VDC ±190 mA ±200 mA 7.5 mA 10 mA 293 mA 287 mA 81 87 2200uF EC4A16 18-36 VDC ±5 VDC ±500 mA ±500 mA 7.5 mA 8 mA 260 mA 254 mA 80 82 2200uF EC4A17 18-36 VDC 3.3 VDC 1000 mA 1200 mA 5 mA 5 mA 186 mA 209 mA 74 79 4700uF EC4A21 36-72 VDC 5 VDC 1000 mA 1000 mA 2 mA 3 mA 132 mA 126 mA 79 83 4700uF EC4A22 36-72 VDC 12 VDC 470 mA 500 mA 2 mA 6 mA 142 mA 144 mA 83 87 4700uF EC4A23 36-72 VDC 15 VDC 400 mA 400 mA 2 mA 6 mA 154 mA 144 mA 81 87 4700uF EC4A24 36-72 VDC ±12 VDC ±230 mA ±250 mA 3 mA 6 mA 142 mA 144 mA 81 87 2200uF EC4A25 36-72 VDC ±15 VDC ±190 mA ±200 mA 3 mA 6 mA 147 mA 144 mA 81 87 2200uF EC4A26 36-72 VDC ±5 VDC ±500 mA ±500 mA 3 mA 5 mA 130 mA 126 mA 80 83 2200uF EC4A27 36-72 VDC 3.3 VDC 1000 mA 1200 mA 2 mA 2 mA 93 mA 104 mA 74 79 4700uF NOTE: 1. Suffix “-E” of the models are high efficiency and wide operating temperature version. 2. Nominal Input Voltage is 12, 24 or 48 VDC. 3. Typical value at nominal input voltage and full load. 1 SPECIFICATIONS All Specifications Typical At Nominal Line, Full Load, and 25℃ Unless Otherwise Noted INPUT SPECIFICATIONS: GENERAL SPECIFICATIONS: Input Voltage Range ....…………..........….... 12V .............................. 9-18V Efficiency ................................................................................. See Table 24V ............................ 18-36V Isolation Voltage: 48V ............................ 36-72V 500 VDC min. ………….…………………………… Standard Models Input Surge Voltage (100ms max.) ………… 12V …….….......... 25Vdc max. 3K VDC min. ... (Non-Conductive Black Plastic Only) …… Suffix “H” Models 24V ....................... 50Vdc max. 1.5K VDC min. ………….………………………… Suffix “HM” Models 9 48V ..................... 100Vdc max. Isolation Resistance .....................................................…… 10 ohm min. Input Filter ………………………………………………….…….……..... Pi Type Isolation Capacitance…………………..…………………… 250pF Typ. Switching Frequency ...................................................... 100KHz, min. OUTPUT SPECIFICATIONS: Voltage Accuracy .......................................................................... ±2.0% max. ℃ ℃ Operating Ambient Temperature Range .......................... -25 to +71 Voltage Balance (Dual) .................................................................. ±1.0% max. “-E” models: -40℃ to +85℃ with Derating /℃ Power de-rating Curve ……………………………………….. see Figure1 Temperature Coefficient …………………………………………… ±0.05% Ripple & Noise, 20MHz BW (Note 5) ……. 3.3V/5V ….…… 100mV p-p, max Case Temperature (Note 4) … Plastic/Copper case... 95℃/100℃ max. 12V/15V ………… 1% p-p max. Cooling ……………………………………………….. Natural Convection Short Circuit Protection ……………………………………………… Continuous ℃ ℃ Storage Temperature Range ………....….......……........ -40 to +100 Line Regulation ……...… Single/Dual (Note 1) ….……………. ±0.5% max. Humidity .................................................. 95% RH max. Non condensing Load Regulation …….… Single (Note 2) ..….…......……….... ±0.5% max. MTBF ………. MIL-STD-217F ..……..……………………… 2000Khrs typ. Dual (Note 3) ……….…………………±1.0% max. “-E” models: 1800Khrs typ. Start up time …………………………………….………………..…... 5 ms max. Dimensions …….. DIP…..… 1.25×0.80x0.40 inches(31.8x20.3×10.2mm) SMD ..… 1.25×0.80x0.45 inches(31.8x20.3×11.4mm) NOTE: 1. Measured From High Line to Low Line S/HS Models (note 6) … 1.25×0.80x0.41 inches(31.8x20.3×10.4mm) 2. Measured From Full Load to 10% Load Case Material: 3. Measured From Full Load to 1/4 Load Standard Models ………….…………… Non-Conductive Black Plastic 4. Maximum case temperature under any operating condition should Suffix “M” Models .. Black Coated Copper with Non-conductive Base not exceed 95℃(Plastic Case),100℃(Copper Case) Suffix “S” Models …….……………………..…………… SMD package 5. The output noise is measured with 0.1uF MLCC across for SMD package Weight …………………………………………………………………... 12.5g 6. S and HS models for “E” Version Only Figure1.Typical Derating curve for Natural Convection 120% -40 71 80 100% 80% 60% Plastic Case Copper Case 40% Case A Dimensions: -E Version 20% NOTE:Pin Size is 0.02 ±0.002Inch (0.5±0.05mm)DIA 100 100 All Dimensions In Inches (mm) -40 Tolerances Inches: X.XX= ±0.02 , X.XXX= ±0.010 0% Millimeters: X.X= ±0.5 , X.XX=±0.25 -40 -20 0 20 40 60 80 100 o Ambient Temperature( C) CASE AS PIN CONNECTION 500 VDC 1.5K & 3K VDC SEE NOTE Single Output Dual Output Single Output Dual Output Pin Pin DIP SMD DIP SMD DIP SMD DIP SMD 1,24 +V Input 1,24 NC NC TOP +V Input NP NP 2,23 NC -V Output 2,3 -V Input -V Input VIEW BOTTOM VIEW 3,22 NC Common 4,5 NP NC NP NC NP NP 9 4 NC NC NC Common NP NP 10,15 5 NC NC NC NC 9 NP NP 11 NC NC NC -V Output 10,15 -V Output Common 12,13 NP NC NP NC 11,14 +V Output +V Output 14 +V Output +V Output 16 Common 12,13 -V Input -V Input -V Output NP NP 16 NC NC 20,21 NP NC NP NC 20,21 NP NC NP NC 22,23 +V Input +V Input *0.41(10.4)mm for "-E" Version S/HS Models * NP-NO PIN * NC-NO CONNECTION WITH PIN 2 LOAD(%)

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products