Manufacturers
CINCON ELECTRONICS EC5C01
Description
Cincon EC5C01(ROHS) DC/DC Converter; 15W; 9-36VDC, 5 VDC, 3000mA
Part Number
EC5C01
Price
Request Quote
Manufacturer
CINCON ELECTRONICS
Lead Time
Request Quote
Category
DC-DC Converters
Specifications
Input Voltage (nominal)
24 V
Input Voltage Range
9 V to 36 V
Isolation Voltage
500 V
Number of Outputs
1
Output Current (Channel 1)
3 A
Output Power
15 W
Output Voltage (Channel 1)
5 V
Product
Isolated
Features
- 15W Isolated Output
- 2" x 2" Six-Sided Shield Metal Case
- 4 : 1 Input Range
- Efficiency to 82%
- Regulated Outputs
- Remote On/Off Control
Datasheet
Extracted Text
0.400 0.400 0.400 0.40 (10.16) (10.16) (10.16) (10.2) 8 7 6 5 1.800 2.00 BOTTOM VIEW (45.72) (50.8) 4 3 2 1 0.90 3-0.200 (22.9) (5.08) 2.00 0.22 (50.8) (5.6) min. 0.040 DIA Remote On/Off Control Specifications (1.02) Logic Compatibility CMOS or Open Collector TTL Ec-On >+5.5 VDC or Open Circuit INPUT SPECIFICATIONS: Ec-Off <1.8 VDC Input Voltage Range......................24V.................................................9-36V 0.40 Shutdown Idle Current 10mA 48V................................................18-72V (10.2) Control Common Referenced to Input Minus Input Filter..............................................................................................Pi Type E C 5 C External Output Trimming S E R I E S OUTPUT SPECIFICATIONS: Output may optionally be externally trimmed (±10%) with a fixed resistor Voltage Accuracy or an external trimpot as shown. Single Output................................................................................ ±1.0% max. PIN 7 Dual +Output................................................................................±1.0% max. 10K 15 WATT -Output................................................................................ ±3.0% max. TRIM PIN 6 DOWN Triple, 5V.........................................................................................±2.0% max. TRIM TRIM 12V/15V................................................................................ ±3.0% max. UP/DOWN UP 4:1 INPUT RANGE Voltage Balance (Dual)...............................................................±1.0% max. PIN 5 Transient Response: DC-DC CONVERTERS Single, 25% Step Load Change....................................................<500µ sec. PIN CONNECTION Dual-FL-1/2L ±1% Error Band..........................................................<500µ sec. External Trim Adj. Range........................................................................±10%. Pin Single Dual Tripe ® Ripple & Noise, 20MHz BW..................................................10mV RMS, max. US 75mV p-p max. 1 Remote On/Off Control E176177 Temperature Coefficient..............................................................± 0.02%/°C No Pin No Pin No Pin 2 Short Circuit Protection............................................................... Continuous Features 3 -Vin -Vin -Vin 1 Line Regulation , Single/Dual.......................................................±0.2% max. 4 +Vin +Vin +Vin Triple...................................................... ±1.0% max. • 15W Isolated Output • Regulated Outputs 2 5 Trim Trim -Aux. Out Load Regulation , Single/Dual.................................................... ±1.0% max. Triple......................................................±5.0% max. 6 -Vout -Vout Common • 2" x 2" Six-Sided Shield Metal Case • Efficiency to 82% +Vout Common +5V out 7 • 4 : 1 Input Range • Remote On/Off Control 8 No Pin +Vout +Aux. Out GENERAL SPECIFICATIONS: Efficiency...........................................................................................See Table Isolation Voltage........................................................................500 VDC min. TRIPLE OUTPUT LOADING TABLE (1) OUTPUT 9 MODEL INPUT OUTPUT INPUT CURRENT Isolation Resistance............................................................................10 ohms Output Amperes % EFF. SIZE Voltage Switching Frequency...................................................................300KHz, typ. VOLTAGE VOLTAGE CURRENT NO LOAD FULL LOAD NUMBER ( Pin No.) Min.(2) Nom. Case Grounding.......................................Connected to Output Common 7 +5 0.25 1.5 EC5C01 5 VDC 3000 mA 15 mA 810 mA 77 Operating Ambient Temperature Range ........................... -25˚C to +71˚C 8 & 5 +12 & -12 0.10 0.31 De-rating, Above 71˚C …………………... Linearly to Zero power at 100˚C EC5C02 12 VDC 1250 mA 15 mA 780 mA 80 3 Case Temperature ……………....................................................100˚C max 8 & 5 +15 & -15 0.10 0.25 Cooling ………………………………………………..........Natural Convection NOTE: EC5C03 15 VDC 1000 mA 15 mA 780 mA 80 Storage Temperature Range..............................................-55°C to + 105°C 1. Maximum total power from all outputs is limited to 15 watts but no output should EMI/RFI.................................................................Six-Sided Continuous Shield exceed its maximum current. EC5C04 ±5 VDC ±1500 mA 20 mA 810 mA 77 Dimensions................................................................2.00 x 2.00 x 0.40 inches 2. Minimum current on each output is required to maintain specified regulation. (50.8 x 50.8 x 10.2 mm) EC5C05 9-36 VDC ±12 VDC ±625 mA 20 mA 780 mA 80 2" x 2" Case Material....................................................Black Coated Copper with CASE C Non-Conductive Base All Dimensions In Inches(mm) EC5C06 ±15 VDC ±500 mA 20 mA 780 mA 80 Tolerance Inches: .xx= ±.04, .xxx= ±.010 Weight.........................................................................................................59g Millimeters: .x= ±1.0, .xx= ±0.25 EC5C07 5/±12 VDC 1500/±310 mA 20 mA 780 mA 80 0.400 0.400 0.400 0.40 (10.16) (10.16) (10.16) (10.2) NOTE: EC5C08 5/±15 VDC 1500/±250 mA 20 mA 780 mA 80 1. Measured From High Line to Low Line 8 7 6 5 2. Measured From Full Load to 1/4 Load EC5C09 3.3 VDC 3000 mA 15 mA 545 mA 76 3. Maximum case temperature under any operating condition should not exceed 100˚C. EC5C11 5 VDC 3000 mA 10 mA 410 mA 77 1.800 2.00 BOTTOM VIEW (45.72) (50.8) EC5C12 12 VDC 1250 mA 10 mA 390 mA 80 EC5C Series Derating Curve 120% EC5C13 15 VDC 1000 mA 10 mA 390 mA 80 -25 71 100% EC5C14 ±5 VDC ±1500 mA 15 mA 400 mA 79 4 3 2 1 80% 0.90 3-0.200 EC5C15 18-72 VDC ±12 VDC ±625 mA 15 mA 380 mA 82 2" x 2" (22.9) (5.08) 60% 2.00 0.22 (50.8) EC5C16 ±15 VDC ±500 mA 15 mA 380 mA 82 (5.6) min. Natural 0.040 DIA 40% Convection (1.02) EC5C17 5/±12 VDC 1500/±310 mA 15 mA 380 mA 82 20% EC5C18 5/±15 VDC 1500/±250 mA 15 mA 380 mA 82 0.40 100 0% (10.2) -25 0 25 50 75 100 EC5C19 3.3 VDC 3000 mA 10 mA 270 mA 76 Ambient Temperature(˚C) NOTE: 1. Nominal Input Voltage 24 or 48 VDC PIN 7 All Specifications Typical At Nominal Line, Full Load and 25˚C Unless Otherwise Noted. All Specifications Typical At Nominal Line, Full Load and 25˚C Unless Otherwise Noted. 10K TRIM PIN 6 DOWN TRIM TRIM UP UP/DOWN PIN 5 Output Load(%) E C 5 C
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the EC5C01?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Cincon EC3A01(ROHS) DC-DC Converters - 3W, 4.5-6V IN, 5V OUT
Cincon EC3A02 DC-DC Converters - 3W, 4.5-6V IN, 12V OUT
Cincon EC3A03(ROHS) DC-DC Converters - 3W, 4.5-6V IN, 15V OUT
Cincon EC3A04(ROHS) DC-DC Converters - 3W, 4.5-6V IN, +/-5V OUT
Cincon EC3A05(ROHS) DC-DC Converters - 3W, 4.5-6V IN, +/-12V
Cincon EC3A06(ROHS) DC-DC Converters - 3W, 4.5-6V IN, +/-15V
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods