FXS 8B 8-Channel Voice Service Card FXS 8B 8-Channel Voice Service Card For use in Adit 600 Platform Part Number: 740-0240 Key Benefits: • Provides up to 96 FXS voice lines in a 2RU rack space • Provides integrated GR-909 test capabilities • Supports migration from TDM to VoIP service delivery while preserving existing capital investment • Supports loop range, ringing and protection for end-office or customer premises • Provides overvoltage and overcurrent protection to minimize service calls due to lightning and power cross incidents • Minimizes power consumption for high-density service delivery with automated battery voltage switching • Ringing voltage/cadence generation and ring trip detection • Loop hold and programmable impedance and termination for international compliance • Selectable µ-Law and A-law encoding Expand business or residential voice service revenues and realize operational efficiencies with GR-909 integrated loop testing ® As part of the Adit 600 solution, the FXS 8B 8- A unique range of software-controlled signaling capa- Channel Voice Service Card enables a high capacity bilities designed into the FXS voice service cards con- platform for a range of integrated voice and data serv- nect virtually any type of 2-wire battery-feed tele- ice offerings. The Adit 600 platform's carrier-grade phone line service. Supported features include caller design with the FXS 8B Service Card’s GR-909 loop ID, calling party disconnect, distinctive ringing, ground test capability offer a range of deployment options start, and E&M signaling conversion. V.90 transmission includes customer premises and local loop termination is supported for optimal dial-up modem performance. in the service provider's point of presence. GR-909 loop test capability provides service providers with a The FXS 8B Service Card is supported with several valuable tool to help quickly diagnose customer serv- local and remote management options. The card can ice issues, which results in enhanced customer care. be configured and managed locally using the Command Line Interface (CLI). On-site installation and mainte- The FXS 8B Service Card can be inserted into any nance is supported with multi-color channel status card slot of the six-slot Adit 600 Multi-service Delivery LEDs for monitoring call progress and channel status. Terminal. This allows the provisioning of up to 48 FXS Remote management is accomplished directly either lines in a single chassis and up to 96 lines in two side- over an in-band DS0 management channel or via a sep- by-side units occupying just two rack units of space. arate SNMP Ethernet connection. Alternatively, The lines can be configured as FXS loop-start or remote management can be accomplished through the ® ground-start interfaces, which can be used to deploy Access Navigator over the Facility Data Link (FDL). either external phone lines, or on-premises customer business line services from T1 access lines. Sales Representative: Phone/ 800-365-2593 5395 Pearl Parkway E-mail/ sales@carrieraccess.com Fax/ 303-218-5680 Boulder, Colorado 80301 www.carrieraccess.com Technical Specifications for the FXS 8B 8-channel Voice Service Card Components : GR-909 Line Tests : • Requires Adit 600 Dual T1 or E1 Controller Card • Hazardous potential: DC voltage >135 V or an AC voltage software release 9.1 or higher >50 V • Foreign electromotive force: DC voltage >6 volts or an AC Management : voltage >10 V • Command Line Interface (CLI) • Resistive faults: resistance tip-ring, tip-GND (ground), ring- GND FXS Transmission Performance : • Receiver off-hook (differentiated from a short tip-ring) • Return loss: ERL ≥19 dB, SRL ≥11 dB with respect to 900 Ω + 2.16µF Power : • Trans-hybrid loss:THL @1010 Hz >23 dB at frequencies • 15 W maximum between 310 Hz and 3210 Hz >16 dB with respect to 900 Ω + 2.16µF Regulatory Approvals : • Idle Noise:A/D <19 dBrnC, D/A <15 dBrnC • USA • Crosstalk: <65 dB - UL60950 • Signal/distortion: - FCC Part 15, Class A - >33 dB @ 0 dBm0 to –30 dBm0 - FCC Part 68 lightning protection - interbuilding levels - >27 dB @ -30 dBm0 to –40 dBm0 - Designed to NEBS Level-3 for type 2 and 4 equipment - >22 dB @ -40 dBm0 to –45 dBm0 (not certified) • Terminating Impedances: 19 selectable impedances • Canada • Transmit gain/loss: +6 dB to -12 dB (in .25 dB increments) - CSA C22.2 No. 60950-00 software selectable - ICES-003, Class A • Receive gain/loss: +6 dB to -12 dB (in .25 dB increments) • European Union software selectable - EN 55022, Class A • Overload: - EN 60950, Safety of Information Technology Equipment - ≤ 0.5 dB @ +3 dB - EN 61000-3-2, Harmonics - ≤ 1.8 dB @ +6 dB - EN 61000-3-3, Flicker - ≤ 4.5 dB @ +9 dB - EN 55024, Immunity • Frequency Response: +0.25 dB -1.5dB from 300 Hz to • Australia/New Zealand 3400 Hz (relative to 1010Hz) - AS/NZS 60950 • Longitudinal balance: >58 dB per NEBS GR-57 and TIA- - AS/NZS CISPR22, Class A 464-C • Modem support: Full compatibility with V.90 modems Physical : • FXS connections made on RJ21-X telco connector rear FXS Signaling Performance : panel • DC Loop Range:≥1700 Ω • Dimensions: • Loop Feed: Nominal 27 mA with automatic battery - 3.5 in (H) x 0.75 in (W) x 11.25 in (D) switching - 8.9 cm (H) x 1.9 cm (W) x 28.6 cm (D) • Off-Hook Detection: Detects tip/ring currents >14mA • Weight: 5.8 oz (0.16 kg) • Ring Ground: Detects ring ground currents >33mA • Ringing Voltage: 85 V rms, 20 Hz, optionally 25 Hz Environment : • Maximum Ringers: 5 REN, FCC Class B ringers • Operating temperature range: 0 °C to 40 °C (32 °F to • Internal Ringing Cadence: 2 seconds on, 4 seconds off for 104 °F) E&M wink start conversion modes • Storage temperature range: -40 °C to 70 °C (-40 °F to • Control Technique: Solid-state with no mechanical relays 158 °F) SM • CLASS features supported: Calling party ID, three-way • Cooling method is by free air convection and requires calling, and distinctive ringing long axis of unit to be mounted horizontally • Calling Party Disconnect: Calling party (forward) • Maximum operating altitude: 3,048 m (10,000 ft) disconnect provides 2 second current interruption to • Maximum non-operating altitude: 12,192 m (40,000 ft) disconnect answering devices and modems – requires • Relative humidity (non-condensing) range: 0% to 95% E&M signaling on the T1 • FXS Signaling: FXS loop start or FXS ground start with LS/GS selection per channel. • FXSDN Signaling: E&M immediate or wink start with ring- ® back tone for carrier services such as Megacom , ® ® ® ® Flexpath , DSS ,VPN ,VNET , etc.Wink delay for advanced ANI/DNIS 800 number services and Direct Inward-Dial (DID) conversion. R2 signaling for E1 applications. • Encoding: Selectable for µ-Law and A-Law Copyright © 2005 Carrier Access Corporation. Adit and the Carrier Access logo are registered trademarks of All rights reserved. Carrier Access Corporation. All other trademarks are the prop- erty of their respective companies. All specifications subject to 027-0228-0002 change without notice. Revision: February 2005 www.carrieraccess.com