Customer Premises Equipment Battery Customer Premises Equipment Battery Backup System Backup System For Customer Premises Installations Battery Unit Part Number: 730-0114 Power Supply/Battery Charger Unit Part Number: 730-0116 Key Benefits : • Wall or rack mounting maximizes space efficiency • No in-service maintenance required with sealed, lead-acid batteries other than recommended three to four year replacement of Battery Unit • Perform Battery Unit installation and replacement without interrupting unit operation (if plugged into AC power) • Easy-to-read LED AC “line” status on Power Supply/Battery Charger Unit • AC “line” power fail alarm • Extended operational life with power drain-prevention feature • Protection against AC power surges with built-in circuit breaker • Limited five-year warranty for the Power Supply/Battery Charger Unit and 90 days for the Battery Unit from the date of the shipment Protect your customers against service interruptions The Customer Premises Equipment (CPE) Battery Backup System (BBS) provides a low-cost, low-maintenance tool to guard service interruptions due to power failure. Offering four to eight hours of ® battery backup for the Adit 600 and eight to twelve ® ® for Access Bank I and II,Wide Bank 28, and Access TM Exchange , it is the ideal solution to boosting cus- tomer satisfaction. In the event of a power outage, the BBS supplies con- tinuous -48 VDC power to the equipment being backed up. Normal AC operation will recharge the battery then switch to trickle-charging the sealed lead-acid batteries. Sales Representative: Phone/ 303-218-5707 5395 Pearl Parkway E-mail/ sales@carrieraccess.com Fax/ 303-218-5680 Boulder, Colorado 80301 www.carrieraccess.com Technical Specifications for the Customer Premises Equipment Battery Backup Solution Features: Power: Product Supported Backup Time • 120 VAC power input with continuous -48 VDC ® • Access Bank I 8-12 hours power output ® • Access BankII 8-12 hours • Maximum recharge time of approximately 24 hours ® • Wide Bank28 8-12 hours TM • Adit 600 4-8 hours Regulatory Approvals: • NRTL safety listed: UL 1950, CSA Backup times are at battery temperature of 68 °F • National Electrical Code 1996 safety requirements (20 °C) • CSA C22.2 No. 950-93 Components: Physical: • AD-to-DC Power Supply/Battery Charger unit with Power Supply/Battery Charger Unit external “telco gound” stud (not required for Adit • Dimensions: 600) - 3.25 in.(H) x 4.0 in.(W) x 5.0 in.(D) • AC power “line” cable (US grounded 3-prong 120 - 8.26 cm (H) x 10.16 cm (W) x 12.7 cm (D) VAC outlet only) • Weight: 6.0 lbs.(2.72 kg) • -48 VDC power cable with “quick connect” for battery charging (2-conductor DC cable) Battery Unit: • -48 VDC power cable for Carrier Access product • Dimensions: power connection (3-conductor DC cable) - 3.0 in.(H) x 17 in.(W) x 6.25 in.(D) - 7.62 cm (H) x 43.18 cm (W) x 15.86 cm (D) Alarms: • Weight: 30 lbs. (13.62 kg) • AC power fail alarm Environment: • Operating temperature range: 32 °F to 122 °F (0 °C to 50 °C) • Ideal operating temperature: 68 °F (20 °C) • Temperatures outside this range will significantly affect battery lifetime Copyright © 2005 Carrier Access Corporation. Adit,Access Bank, the Carrier Access logo and Wide Bank are registered All rights reserved. trademarks and Access Exchange is a trademark of Carrier Access Corporation.All other trademarks are the property of their respective 027-0055-1101 companies. All specifications subject to change without notice. Revision: September 2005 www.carrieraccess.com