BOSER HS-6037LV
Specifications
System Chipset
Intel 82443BX
Form Factor
PICMG
Ethernet Chipset
Intel 82559
Video Chipset
C&T 69000
Bus Interface
PICMG Bus
Chipset
Intel 82443BX
FDD
Support up to two floppy disk drives
I/O Chipset
Winbond W83977
IDE Interface
Four IDE disk drives support DMA33 transfer rate up to 33MB/sec
IR Interface
One IrDA TX/RX connector
Keyboard/Mouse
Keyboard:PS/2 6pin Mini Din or 5pin connector Mouse: PS/2 6pin Mini Din or 4pin header
LAN
Dual Intel 82559 100 Based LAN
Memory
Three DIMM sockets provide up to 768 MB
Parallel
Support SPP/ECP/EPP
PCI
PC/104 connector for 16bit ISA Bus
PCI to ISA Bridge
Intel 21152 or equivalent device
Processor
Intel Celeron/Coppermine
Socket 370 for Intel Celeron/Coppermine 300~850 MHz
SATA
Symbios 53C895 Ultra II SCSI
Serial
One RS-232 and one RS-232/422/485 serial ports include 16C550 UART with 16byte FIFO
USB
Support up to two USB ports
VGA
69000 with 2MB memory support CRT/Panel display up to 1280x1024x256 colors
Features
- 100 MHz system clock rate
- ATX Power Function support
- CPU Temperature Alarm Function support
- CPU Temperature Monitor support
- DiskOnChip memory size up to 144MB
- Fast PCI DMA33 controller support four IDE disk drives
- On board 69000 CRT/Panel display controller
- On board dual Intel 82559 100 based LAN
- On board PCI Bridge
- On board PS/2 Keyboard and PS/2 mouse connector
- On Board Symbios 53C895 Ultra II SCSI
- On board Winbond W83977 Super I/O chipset
- One enhanced bi-directional parallel port supports SPP/ECP/EPP
- One RS-232 and one RS-232/422/485 serial ports include 16C550 UART with 16byte FIFO
- PC/104 Bus connector
- PnP I/O address & IRQ selection
- Socket 370 for Intel Celeron/Coppermine 300~850 Mhz CPU
- Three DIMM sockets provide up to 768 MB
Datasheet
Extracted Text
Socket 370 PICMG SBC with PCI VGA and panel display ROBO-608 Specifications Feat Feat ure ure ® ® CPU Intel Pentium III processors in the FC-PGA 370 package ® ® ® Intel Celeron processors in the PPGA & FC-PGA 370 package Reliable design for high speed Intel ® ® Pentium III or Celeron processor System Bus Frequency 66/100 MHz ® ® Chipset Intel 82440BX AGPset Intel 440BX AGPset, the most stable and ® highly market recognized chipset from Intel Memory - Up to 1GB PC100 SDRAM on four 168-pin DIMM sockets - ECC support PC100 MHz SDRAM for cost effective memory support L2 Cache Memory Built-in CPU BIOS AMI BIOS ECC function for data sensitive application On-Board I/O - On-board Winbond W83977ATF super I/O C&T 69000 and 2 MB SDRAM provide a high - Support for four EIDE devices with Ultra DMA/33 performance, low power, highly integrated - Up to two floppy disk drives solution and versatile panel support - Two serial, one parallel, one IrDA and two USB ports Standard features for embedded system, like Watchdog Timer - Programmable via software from 0.5 sec. to 254.5 min. H/W monitoring, WDT, SSD and Wake-on- LAN - Adjustable via hardware jumper setting from 0.5 sec. to 64 sec. Keyboard/Mouse - One mini-DIN 6-pin connector for keyboard and mouse One DOC socket for booting Windows NT directly - One 5-pin header for external keyboard connection Expansion Interface PC/104 expansion connector PC/104 expansion connector for higher flexibility and expandibility ISA Bus 64mA high drivig ISA bus interface to backplane for legacy ISA slots Hardware Monitor System monitor (fan, temperature, voltage) ACPI Function ATX function with 4-pin header connect to backplane Power Consumption +5V@6A (typ.) ; +12V@140mA, -12V@30mA Approval FCC, CE class A Board Dimension 338.5(L) x 129(W) mm ; 13.33"(L) x 5.1"(W) 6-layer PCB Operating Temperature 0 to 55 ˚C Storage Temperature -20 to 75 ˚C Relative Humidity 5% to 95%, non-condensing Ordering Guide Additional Functionality Display - C&T 69000 video display chip ROBO-608 - 2MB display memory Socket 370 PICMG SBC with PCI VGA - Display resolution up to 1280 x 1024 x 8 bpp @ 60 Hz ROBO-608V - Support for CRT display or TFT/DSTN flat panel (optional) Socket 370 PICMG SBC without PCI VGA - DSUB-15 VGA connector at the rear panel Solid State Disk DOC socket for up to 288 MB SBC/ROBO-608 14
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the HS-6037LV?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods