HS-6037 ™ ™ Socket 370 Celeron /Coppermine • Full Size•All in one•CRT/Panel•Dual LAN•SCSI•PC/104• • WDT•DOC•CTA•RS-232/422/485•CTM•USB•IrDA • PICMG Industrial Single Board Computer• HS-6037LLV ™ ™ Socket 370 Celeron /Coppermine • Full Size•All in one•CRT/Panel•Dual LAN•PC/104• • WDT•DOC•CTA•RS-232/422/485•CTM•USB•IrDA PICMG Industrial Single Board Computer• HS-6037LV ™ ™ Socket 370 Celeron /Coppermine • Full Size•All in one•CRT/Panel•LAN•PC/104• • WDT•DOC•CTA•RS-232/422/485•CTM•USB•IrDA PICMG Industrial Single Board Computer• HS-6037V ™ ™ Socket 370 Celeron /Coppermine • Full Size•All in one•CRT/Panel•PC/104• • WDT•DOC•CTA•CTM•USB•IrDA PICMG Industrial Single Board Computer• Copyrights This manual is copyrighted and all rights are reserved. It is not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer. In general, the manufacturer will not be liable for any direct, indirect, special, incidental or consequential damages arising from the use of inability to use the product or documentation, even if advised of the possibility of such damages. The manufacturer keeps the rights in the subject to change the contents of this manual without prior notices in order to improve the function design, performance, quality and reliability. The author assumes no responsibility for any errors or omissions, which may appear in this manual, nor does it make a commitment to update the information contained herein. Trademarks BOSER is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. ISB is a registered trademark of BOSER Technology Co., Ltd. All other trademarks, products and or product's name mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners. © Copyright 2000 All Rights Reserved. User Manual edition 2.5, June 03, 2003 Contents HS-6037 ......................................................................................................1 HS-6037LLV ...............................................................................................1 HS-6037LV..................................................................................................1 HS-6037V....................................................................................................1 GENERAL INFORMATION .............................................................................3 1.1 MAJOR FEATURES .....................................................................................4 1.2 SPECIFICATIONS.........................................................................................5 1.3 DELIVERY PACKAGE...................................................................................7 HARDWARE INSTALLATION ........................................................................8 2.1 CAUTION OF STATIC ELECTRICITY.............................................................8 2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION .............................9 2.3 HS-6037’S LAYOUT.................................................................................10 2.4 QUICK LISTING OF JUMPERS ...................................................................11 2.5 QUICK LISTING OF CONNECTORS............................................................12 2.6 JUMPER SETTING DESCRIPTION..............................................................13 2.7 SETTING THE BUS CLOCK FREQUENCY...................................................14 2.8 SETTING THE RTC CONFIGURATION.......................................................14 2.9 SYSTEM MEMORY DRAM........................................................................14 2.10 SETTING THE FLAT PANEL VOLTAGE.....................................................15 2.11 WATCH-DOG TIMER...............................................................................15 2.12 SCSI CONTROLLER...............................................................................18 2.13 VGA CONTROLLER................................................................................18 2.14 DISKONCHIP ADDRESS SETTING.......................................................18 CONNECTION .................................................................................................20 3.1 POWER AND FAN CONNECTORS ............................................................20 3.2 IDE'S LED, KEY-LOCK AND RESET BUTTON..........................................21 3.3 EXTERNAL SPEAKER................................................................................22 3.4 PCI E-IDE DRIVE CONNECTOR..............................................................23 3.5 PARALLEL PORT CONNECTOR.................................................................25 3.6 THE FLOPPY DISK DRIVE CONNECTOR...................................................26 3.7 SERIAL PORTS CONNECTORS .................................................................27 3.8 KEYBOARD/MOUSE CONNECTORS ..........................................................29 Contents • i 3.9 VGA CONNECTORS.................................................................................31 3.10 IR CONNECTOR .....................................................................................33 3.11 USB CONNECTOR .................................................................................34 3.12 LAN INTERFACE CONNECTOR ..............................................................34 3.13 ULTRAⅡSCSI INTERFACE CONNECTOR..............................................36 3.14 ATX POWER CONTROLLER CONNECTOR .............................................37 AWARD BIOS SETUP....................................................................................38 4.1 MAIN MENU..............................................................................................39 4.2 STANDARD CMOS SETUP.......................................................................40 4.3 BIOS FEATURES SETUP..........................................................................41 4.4 CHIPSET FEATURES SETUP.....................................................................42 4.5 INTEGRATED PERIPHERALS .....................................................................43 4.6 POWER MANAGEMENT SETUP.................................................................45 4.7 PNP/PCI CONFIGURATION SETUP ..........................................................46 SOFTWARE UTILITIES .................................................................................47 5.1 VGA DRIVER INSTALL FOR WIN95&98....................................................48 5.2 VGA DRIVER INSTALL FOR WIN NT4.0 ..................................................51 5.3 NETWORK DRIVER INSTALL FOR WIN 95&98 .........................................55 5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0..........................................58 5.5 ULTRA II SCSI INSTALL FOR WIN95&98 .................................................60 5.6 ULTRA II SCSI INSTALL FOR WIN NT4.0.................................................64 ii •Contents Chapter-1 General Information ® The HS-6037 is a 100MHz bus Intel BX chipset design PICMG bus Socket TM TM 370 for Celeron™/Coppermine (Coppermine just for PCB V2.1) Industrial Single Board (I.S.B.) CPU card with features combine together to make it an ideal all-in-one industrial single board computer, enhanced I/O effects with VGA, LAN and Ultra II SCSI interface. With on board DMA33 of mode 4 to IDE drive interface architecture, the HS-6037 supports with maximum 33.3 MB/sec in data transfer rating to two ® IDE drive connection. Design with Intel 82443 BX core logic chipset TM supports all series Celeron™/Coppermine 300~850MHz CPU. On board ® Intel 69000 VGA controller support up to 1280 x 1024 256 colors display resolution. And it also provides one internal 50pin connector for various type of the LCD Panel connection. The advanced PICMG bus add-on connection of HS-6037 allows user could easily obtain both ISA's 16bit and PCI's 32bit full set signals from a full size PICMG slot for suitable plug into a any size system with 8/16/32-bit ISA and-or PCI slots operating. The HS-6037 provides with three 168pin DIMM sockets support up to 768MBytes of main system memory. A single Flash chip holds the system BIOS, and you can easy update the Flash BIOS by the Utility Update. Advanced USB and IR ports also provide for faster and easily in data transmission. You can also use the DOS version of the "DiskOnChip" socket by issuing commands from the DOS prompt without the necessity of other software supports up to 144MB. ® The HS-6037 features include two Intel 82559 10/100-Based LAN design on board. With one external RJ45 and two 10 pin header connector provides an easily for user’s LAN application. If a non-expect program cause halts, the onboard watchdog timer will automatically reset the CPU or generate an interrupt. The watchdog is designed with hardware only and doesn’t need any arithmetical functions of a real-time clock chip. This ensures the reliability in an unmanned or standalone system. 3 1.1 Major Features ® TM TM � Socket 370 for Intel Celeron /Coppermine 300~850MHz CPU � Three DIMM sockets provides up to 768MB � Fast PCI DMA33 controller support four IDE disk drives � 100MHz system clock rate � PnP I/O address & IRQ selection � One RS-232 and one RS-232/422/485 serial ports include 16C550 UART with 16byte FIFO � One enhanced bi-directional parallel port supports SPP/ECP/EPP � On board PS/2 Keyboard and PS/2 Mouse connector � On board Winbond W83977 super I/O chipset � On board 69000 CRT/Panel display controller ® � On board Dual Intel 82559 100 Based LAN � On board Symbios 53C895 Ultra II SCSI � On board PCI Bridge � DiskOnChip memory size up to 144MB � PC/104 Bus connector � ATX Power Function support � CPU Temperature Alarm Function support � CPU Temperature Monitor Function support *It will be a Warning “beep” come out if the CPU’s temperature reached 60℃±5%. And it will stop as the CPU’s temperature going down below 60℃±5% again. 4 1.2 Specifications ® TM TM � CPU：Socket 370 for Intel Celeron /Coppermine 300~850MHz CPU � Bus Interface：PICMG Bus � Memory：Three DIMM sockets provides up to 768MB ® � Chipset：Intel 82443BX � I/O Chipset：Winbond W83977 ® � PCI Bridge：Intel 21152 or equivalent device � VGA：69000 with 2MB memory support CRT/Panel display up to 1280x1024x256 colors � IDE：Four IDE disk drives support DMA33 transfer rate up to 33MB/sec � Floppy：Support up to two floppy disk drives � Parallel Port：Support SPP/ECP/EPP ® � Dual LAN：Dual Intel 82559 100 Based LAN � SCSI：Symbios 53C895 Ultra II SCSI � Serial Port：One RS-232 and one RS-232/422/485 serial ports include 16C550 UART with 16byte FIFO � PC/104：PC/104 connector for 16bit ISA Bus � IR：One IrDA TX/RX header � USB：Support two USB ports � Keyboard：PS/2 6pin Mini Din or 5pin header � Mouse：PS/2 6pin Mini Din or 4pin header � DiskOnChip：Socket for DiskOnChip and memory size up to 144MB � BIOS：Award Y2K PnP Flash BIOS 5 � Watch-Dog Timer：Set 1, 2, 10, 20, 110, 220 seconds activity trigger with Reset or NMI � CMOS：DS12C887 or equivalent device � DMA Channels：7 � Interrupt Levels：15 � Extra Power：One 4pin +5V+12V connector � Power Voltage：+5V, +12V, -12V � Maximum Power Consumption：+5V@6.2A(800MHz), +12V@120mA, -12V@50mA � Operating Temperature：0~60℃ � CPU Temperature Alarm：Beeping alarm when CPU’s temperature over heating limited � CPU Temperature Monitor：LM75 or equivalent device � Board Size：13.26” (L) x 4.8”(W) The HS-6037 provides with VGA CRT-LCD Interface, supports DMA33, WDT, DOC, DUAL LAN, UltraⅡSCSI, USB and IrDA. The HS-6037LLV provides with VGA CRT-LCD Interface, supports DMA33, WDT, DOC, USB, DUAL LAN and IrDA. ( A version without SCSI of HS-6037). The HS-6037LV provides with VGA CRT-LCD Interface support DMA33, WDT, DOC, LAN, USB and IrDA. ( A version without one LAN and SCSI of HS-6037). The HS-6037V provides with VGA CRT-LCD Interface support DMA33, WDT, DOC, USB and IrDA. ( A version without two LAN ,SCSI and RS-232/422/485 of HS-6037 ). 6 1.3 Delivery Package The delivery package of HS-6037 includes all following items: � One HS-6037 Industrial Single Board � One Printer Ports Bracketed Flat Cable � One com port Bracketed Flat Cable � One IDE port Flat Cable � One FDD port Flat Cable � One PS/2 to Standard DIN type Keyboard Transfer Cable � Two LAN Cable � Utility CD � User’s Manual Please contact with your dealer if any of these items are missing or damaged when purchasing. And please keep all parts of the delivery package with packing materials in case of you want to ship or store the product in feature. 7 Chapter-2 Hardware Installation This chapter provides the information on how to install the hardware of HS-6037. At first, please follow up sections 1.3, 2.1 and 2.2 in check the delivery package and carefully unpacking. Following after, the jumpers setting of switch, watchdog timer and the DiskOnChip address selection etc. 2.1 Caution of Static Electricity The HS-6037 has been well package with an anti-static bag in protect its sensitive computer components and circuitry from the damage of static electric discharge. Note: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC PROTECTION. You should follow the steps as following to protect the board in against the static electric discharge whenever you handle the board: 1. Please use a grounding wrist strap on whoever needs to handle the HS-6037. Well clip the ALLIGATOR clip of the strap to the end of the shielded wire lead from a grounded object. Please put on and connect the strap before handle the HS-6037 for harmlessly discharge any static electricity through the strap. 2. Please use anti-static pad for put any components or parts or tools on the pad whenever you work on them outside the computer. You may also in use the anti-static bag instead the pad. Please ask from your local supplier in help up your necessary parts on anti-static requirement. 8 2.2 Caution on Unpacking and Before Installation First of all, please follow with all necessary steps of section 2.1 in protection the HS-6037 from electricity discharge. With refer to section 1.3, please check the delivery package again with following steps: 1. Unpacking the HS-6037, keep well storage of all packing material, manual and diskette etc. if has. 2. Is there any components lose or drop from the board? DO NOT INSTALL IF HAPPENED. 3. Is there any visual damaged of the board? DO NOT INSTALL IF HAPPENED. 4. Well check from your optional parts (i.e. CPU, SRAM, DRAM, ROM-Disk etc.) for completed setting all necessary jumpers setting to jumper pin-set and CMOS setup correctly. Please also reference to all information of jumpers setting in this manual. 5. Well check from your external devices (i.e. Add-On-Card, Driver Type etc.) for completed add-in or connection and CMOS setup correctly. Please also reference to all information of connector connection in this manual. 6. Please keep all necessary manual and diskette in a good condition for your necessary re-installation if you change your Operating System or whatever needs. 9 2.3 HS-6037’s Layout 10 2.4 Quick Listing of Jumpers JP1 � RESET..................................................................... P.21 JP3 � BASE CLOCK FREQUENCY SETTING .......................... P.14 JP5 � PANEL VOLTAGE SELECT.......................................... P.15 JP6 � CMOS CLEAR (DS12B887 ONLY) ........................... P.14 JP7 � RS-422/485 RECEIVER SELECT............................... P.27 JP9 � RS-422/485 TRANSCEIVER SELECT ......................... P.27 JP10/JP11 � RS-232 OR RS-422/485 SELECT ............................ P.27 JP12(5-10) � DISKONCHIP ADDRESS SELECT............................... P.15 JP12(1-4) � WDT TIMER SELECT................................................ P.19 JP13 � WDT ACTIVE SELECT .............................................. P.15 JP14/JP15 � LAN1/LAN2 ENABLE/DISABLED SELECT JP24 � VGA ENABLE/DISABLED SELECT .............................. P.18 JP25 � SCSI ENABLE/DISABLED SELECT............................. P.18 11 2.5 Quick Listing of Connectors S1 � ATX POWER SWITCH CN3 � SPEAKER ................................................................... P.22 CN4 � IDE LED CONNECTOR ............................................... P.21 CN5 � 5PIN KEYBOARD CONNECTOR...................................... P.29 CN6 � FAN CONNECTOR....................................................... P.20 CN7(1-2) � POWER LED .............................................................. P.21 CN7(3-5) � KEYLOCK.................................................................... P.21 CN8 � IR .............................................................................. P.23 CN9 � 4PIN POWER CONNECTOR ........................................... P.20 CN10 � PRIMARY IDE CONNECTOR ......................................... P.23 CN11 � SECONDARY IDE CONNECTOR.................................... P.23 CN12 � SCSI CONNECTOR ..................................................... P.36 CN13 � ATX POWER CONNECTOR CN14 � ATX FUNCTION CONNECTOR ...................................... P.37 CN15 � FDD CONNECTOR ...................................................... P.26 CN16 � PANEL CONNECTOR.................................................... P.31 CN17 � PC/104 64PIN CONNECTOR CN18 � PC/104 40PIN CONNECTOR CN19 � PARALLEL PORT CONNECTOR ..................................... P.25 CN20 � RS-422/485 CONNECTOR .......................................... P.27 CN21 � USB CONNECTOR CN22 � COM1 (5X2 HEADER) ................................................ P.27 CN23 � COM2 (5X2 HEADER) ................................................ P.27 CN24 � LAN1 10PIN CONNECTOR (5X2 HEADER).................... P.34 CN25 � LAN2 10PIN CONNECTOR (5X2 HEADER).................... P.34 CN26 � 10PIN VGA CONNECTOR (5X2 HEADER) ..................... P.31 CN27 � LAN1 RJ45 CONNECTOR........................................... P.34 CN28 � 4PIN MOUSE CONNECTOR ........................................... P.29 CN29 � PS/2 6PIN MINI DIN MOUSE CONNECTOR ..................... P.29 CN30 � DB15 VGA CONNECTOR............................................. P.31 CN31 � PS/2 6PIN MINI DIN KEYBOARD CONNECTOR ............. P.29 CN32 � COM1 (DB9) ............................................................. P.27 CN33 � COM2 (DB9) ............................................................. P.27 12 2.6 Jumper Setting Description A jumper pin-set is ON as a shorted circuit with a plastic cap inserted over two pins. A jumper pin-set is OFF as a open circuit with a plastic cap inserted over one or no pin(s) between pins. The below figure 2.2 shows the examples of different jumper pin-set setting as ON or OFF in this manual. Figure 2.2 All jumper pin-set already has its default setting with the plastic cap inserted as ON, or without the plastic cap inserted as OFF. The default setting may reference in this manual with a " * " symbol in front of the selected item. 13 2.7 Setting the Bus Clock Frequency The HS-6037 provides all necessary by jumper setting in using Bus Clock frequency as the system bus clocking with JP3 setting as following: � Bus Clock Frequency Setting of JP3 ： Bus Clock Frequency JP3 *66MHz ON 100MHz OFF ® TM PS：Pentium III FC-PGA Coppermine Processor 100MHz FSB, please set JP3 off. 2.8 Setting the RTC Configuration The HS-6037 provides a setting for the selection of the RTC Clear Jumper by JP6 setting as following: � CMOS Setting of JP6：(DS12B887 only) CMOS Clear Jumper JP6 Normal * OFF Clear CMOS ON 2.9 System Memory DRAM The HS-6037 provides a wide SDRAM memory by three DIMM sockets (DIM1, DIM2, DIM3) request the access time should meet PC100 standard. The maximum capacity of the on board memory is 768MBytes. 14 2.10 Setting the Flat Panel Voltage The HS-6037 provides a setting for the selection of the working voltage of individual flat panel by JP5 setting as following: � Flat Panel Voltage Selecting of JP5： Panel’s Working Voltage JP5 5.0 V 1-2 * 3.3 V 2-3 Please contact with your flat panel supplier for make sure a correct Panel’s Working Voltage. Any mistake will cause defect to your flat panel. 2.11 Watch-Dog Timer There are three access cycles of Watch-Dog Timer as Enable, Refresh and Disable. The Enable cycle should proceed by READ PORT 443H. The Disable cycle should proceed by READ PORT 045H. A continue Enable cycle after a first Enable cycle means Refresh. Once if the Enable cycle activity, a Refresh cycle is request before the time-out period for restart counting the WDT Timer's period. Otherwise, it will assume that the program operation is abnormal when the time counting over the period preset of WDT Timer. A System Reset signal to start again or a NMI cycle to the CPU comes if over. The JP13 is using for select the active function of watch-dog timer in disable the watch-dog timer, or presetting the watch-dog timer activity at the reset trigger, or presetting the watch-dog timer activity at the NMI trigger. 15 � JP13 : WDT Active Type Setting JP13 DESCRIPTION *2-3 System Reset 1-2 Active NMI OFF Disable Watch-Dog Timer The WDT is disabled after the system Power On. The WDT can be enabled by a Enable cycle with reading the control port (443H), a Refresh cycle with reading the control port (443H) and a Disable cycle by reading the WDT disable control port (045H). After a Enable cycle of WDT, user must constantly proceed a Refresh cycle to WDT before its period setting comes ending of every 1, 2, 10, 20, 110 or 220 seconds which pre-setting by JP12. If the Refresh cycle does not active before WDT period cycle, the on board WDT architecture will issue a Reset or NMI cycle to the system. � JP12(5-10) : Select WDT Preiod PERIOD 5-6 7-8 9-10 *1 sec ON ON ON 2 sec OFF ON ON 10 sec ON OFF ON 20 sec OFF OFF ON 110 sec ON ON OFF 220 sec OFF ON OFF The Watch-Dog Timer is controlled by two I/O ports. 443H I/O Read The Enable cycle 443H I/O Read The Refresh cycle 045H I/O Read The Disable cycle The following sample programs showing how to Enable, Disable and Refresh the WDT： 16 WDT_EN_RF EQU 0443H WDT_DIS EQU 0045H WT_Enable PUSH AX ; keep AX DX PUSH DX MOV DX,WDT_EN_RF ; enable the watch-dog timer IN AL,DX POP DX ; get back AX, DX POP AX RET WT_Rresh PUSH AX ; keep AX, DX PUSH DX MOV DX,WDT_ET_RF ; refresh the watch-dog timer IN AL,DX POP DX ; get back AX, DX POP AX RET WT_DISABLE PUSH AX PUSH DX MOV DX,WDT_DIS ; disable the watch-dog timer IN AL,DX POP DX ; get back AX, DX POP AX RET 17 2.12 SCSI Controller The HS-6037 provides SYMBIOS Ultra II SCSI Controller transferred rate up to 80 Mbytes/Sec, and can drive up to 15 set SCSI HDD. A JP25 is using for select the enable or disable function of SCSI control. � JP25 : SCSI Enable/Disable Select JP25 DESCRIPTION 1-2 Enable * 2-3 Disable 2.13 VGA Controller The HS-6037 has built in a 69000 VGA Controller with 2 MB memory, support resolutions up to 1280 x 1024 x 256 colors, reserved internal 50pin Panel connector. � JP24 : VGA Enable/Disable Select JP24 DESCRIPTION 1-2 Enable 2-3 Disable 2.14 DiskOnChip Address Setting The HS-6037 provides a U17 socket for install the DiskOnChip module. A JP12 may select the starting memory address of the DiskOnChip (D.O.C.) for avoid the mapping area with any other memory devices. If you have another extra memory devices in the system with the same memory, neither the HS-6037 nor the extra memory devices will function normally. Please setting both at different memory address mapping. 18 � JP12(1-4) : DiskOnChip Address Select Memory Address Mapping 1-2 3-4 *D000 ON ON D800 ON OFF E000 OFF ON *) : default setting The D.O.C. function allows the system in using without FDD nor HDD. The D.O.C. may formatting as driver C: or driver A: User may also easily uses the DOS's commands such as FORMAT, SYS, COPY, XCOPY, DISCOPY and DISKCOMP etc. This is means that the D.O.C. may uses as driver-A if the system without FDD-A for ambient application. Please contact with your supplier for different size D.O.C. module. 19 Chapter-3 Connection This chapter gives all necessary information of the peripheral's connections, switches and indicators. 3.1 Power and FAN Connectors The HS-6037 provides one 4pin DC Power connector as following CN9 pin information. And also provides one 3pin fan out connector as following CN6 pin information. � CN9 : 4pin Power Connector PIN NO. DESCRIPTION 1 +12V 2 GND 3 GND 4 VCC � CN6 : 3pin FAN Connector PIN NO. DESCRIPTION 1 GND 2 +12V 3 N.C. 20 3.2 IDE's LED, Key-Lock and Reset Button The HS-6037 has one LED ( D1 ) indicates out power on status. And the following provides the pin information for IDE's LED indicator, Keylock and Reset Button connections from CN4, CN7 and JP1. � CN4 : IDE LED Connector PIN NO. DESCRIPTION 1 HDD Active# 2 +5V � CN7 : Power LED & Keylock PIN NO. DESCRIPTION 1 Power LED Anode 2 N/C 3 GND 4 Keylock 5 GND � JP1 : Reset Button PIN NO. DESCRIPTION 1 GND 2 External Reset 21 3.3 External Speaker The HS-6037 has an on board buzzer (BZ1). And it also provides the CN3 in allows user to connecting to the external speaker. � CN3 : Speaker Connector PIN NO. DESCRIPTION 1 SPEAKER SIGNAL 2 NC 3 GROUND 4 +5V 22 3.4 PCI E-IDE Drive Connector Two standard 40pin header daisy-chain driver connector provides as CN10 and CN11 with following pin assignment. Total four IDE (Integrated Device Electronics) drivers may connect. � CN10: Primary IDE Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RESET 2 GND 3 DATA 7 4 DATA 8 5 DATA 6 6 DATA 9 7 DATA 5 8 DATA 10 9 DATA 4 10 DATA 11 11 DATA 3 12 DATA 12 13 DATA 2 14 DATA 13 15 DATA 1 16 DATA 14 17 DATA 0 18 DATA 15 19 GND 20 N/C 21 N/C 22 GND 23 IOW# 24 GND 25 IOR# 26 GND 27 N/C 28 BALE - DEFAULT 29 N/C 30 GROUND# -DEFAULT 31 INTERRUPT 32 IOCS16#-DEFAULT 33 SA1 34 N/C 35 SA0 36 SA2 37 HDC CS0 38 HDC CS1# 39 HDD ACTIVE 40 GND 23 � CN11: Secondary IDE Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RESET 2 GND 3 DATA 7 4 DATA 8 5 DATA 6 6 DATA 9 7 DATA 5 8 DATA 10 9 DATA 4 10 DATA 11 11 DATA 3 12 DATA 12 13 DATA 2 14 DATA 13 15 DATA 1 16 DATA 14 17 DATA 0 18 DATA 15 19 GND 20 N/C 21 N/C 22 GND 23 IOW# 24 GND 25 IOR# 26 GND 27 N/C 28 BALE - DEFAULT 29 N/C 30 GROUND# -DEFAULT 31 INTERRUPT 32 IOCS16#-DEFAULT 33 SA1 34 N/C 35 SA0 36 SA2 37 HDC CS0 38 HDC CS1# 39 HDD ACTIVE 40 GND 24 3.5 Parallel Port Connector A standard 26pin flat cable driver connector provides as CN19 with following pin assignment for connection to parallel printer. � CN19: Parallel Port Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 STROBE 2 DATA 0 3 DATA 1 4 DATA 2 5 DATA 3 6 DATA 4 7 DATA 5 8 DATA 6 9 DATA 7 10 ACKNOWLEDGE 11 BUSY 12 PAPER EMPTY 13 PRINTER SELECT 14 AUTO FORM FEED 15 ERROR# 16 INITIALIZE 17 PRINTER SELECT LN# 18 GND 19 GND 20 GND 21 GND 22 GND 23 GND 24 GND 25 GND 26 GND 25 3.6 The Floppy Disk Drive Connector A standard 34pin header daisy-chain driver connector provides as CN15 with following pin assignment. Total two FDD drivers may connect. � CN15 : FDD Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 2 REDUCE WRITE 3 GND 4 N/C 5 GND 6 N/C 7 GND 8 INDEX# 9 GND 10 MOTOR ENABLE A# 11 GND 12 DRIVE SELECT B# 13 GND 14 DRIVE SELECT A# 15 GND 16 MOTOR ENABLE B# 17 GND 18 DIRECTION# 19 GND 20 STEP# 21 GND 22 WRITE DATA# 23 GND 24 WRITE DATA# 25 GND 26 TRACK 0# 27 GND 28 WRITE PROTECT# 29 GND 30 READ DATA# 31 GND 32 SIDE 1 SELECT 33 GND 34 DISK CHANGE# 26 3.7 Serial Ports Connectors The HS-6037 offers two high speed NS16C550 compatible UART with Read/Receive 16 byte FIFO serial ports with two internal 10pin header. The HS-6037P which is with two external DB9 connectors without VGA nor LAN on board. All pin-assignment are listing at below: � CN32/33 : COM1/COM2 Serial Connector (DB9) PIN NO. DESCRIPTION 1 DATA CARRIER DETECT (DCD) 2 RECEIVE DATA (RXD) 3 TRANSMIT DATA (TXD) 4 DATA TERMINAL READY (DTR) 5 GND (GND) 6 DATA SET READY (DSR) 7 REQUEST TO SEND (RTS) 8 CLEAR TO SEND (CTS) 9 RING INDICATOR (RI) � CN22/23 : COM1/COM2 Serial Connector (5x2 Header) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 DCD 2 DSR 3 RXD 4 RTX 5 TXD 6 CTX 7 DTR 8 RI 9 GND 10 N/C The HS-6037 also provides one RS-422/485 port, the CN20 for use as an RS-422/485. Please reference to the following for setting JP7, JP9, JP10 and JP11 at enable or disable the RS-422/485 function. � JP10/JP11 : RS-232/422/485 Select Jumper RS232 RS-422/485 JP10 3-5, 4-6 ON 1-3 ,2-4 ON JP11 3-5, 4-6 ON 1-3, 2-4 ON 27 � CN20 : RS-422/485 Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 -TX 2 +TX 3 +RX 4 -RX 5 GND 6 -RTS 7 +RTS 8 +CTS 9 -CTS 10 N/C � JP7 : Receiver Enable Control JP7 DESCRIPTION 1-2 ON Always Enable 3-4 ON Enable by writing the REG : 2 EFH BIT1=1 *1-2 OFF Always Disable � JP9 : Transceiver Enable Control JP9 DESCRIPTION 1-2 ON Always Enable 3-4 ON Enable by ”-RTS” signal 5-6 ON Enable by writing the REG : 2 EFH BIT0=1 *ALL OFF Always Disable 28 3.8 Keyboard/Mouse Connectors The HS-6037 offers two possibilities for keyboard connections to external PS/2 type keyboard at CN31, or an internal 5pin header at CN5. � CN5: 5pin Keyboard Connector PIN NO. DESCRIPTION 1 KEYBOARD CLOCK 2 KEYBOARD DATA 3 N/C 4 GND 5 +5V � CN31 : PS/2 6pin Mini Din Keyboard Connector PIN NO. DESCRIPTION 1 KEYBOARD DATA 2 N/C 3 GND 4 +5V 5 KEYBOARD CLOCK 6 N/C The HS-6037 provides an external PS/2 mouse connector at CN29 and Internal 4pin mouse connector at CN28 with following pin information. 29 � CN29 : PS/2 6pin Mini Din Mouse Connector PIN NO. DESCRIPTION 1 DATA 2 N/C 3 GND 4 +5V 5 CLK 6 N/C � CN28 : 4pin Mouse Connector PIN NO. DESCRIPTION 1 CLK 2 DATA 3 VCC 4 GND 30 3.9 VGA Controller The HS-6037 provides three possible connectives of VGA connections. One standard DB15 external VGA connector as following CN30 pin information. Another header is 5X2 internal VGA connector. Others internal 50pin header for LCD Panel connection as following CN16 pin information. � CN16 : 50pin Internal LCD Panel Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 +12V 2 +12V 3 GND 4 GND Note-1 5 3.3V / 5V 6 ENAVDD 7 ENAVEE 8 GND 9 P0 10 P1 11 P2 12 P3 13 P4 14 P5 15 P6 16 P7 17 P8 18 P9 19 P10 20 P11 21 P12 22 P13 23 P14 24 P15 25 P16 26 P17 27 P18 28 P19 29 P20 30 P21 31 P22 32 P23 33 P24 34 P25 35 SHFCLK 36 FP 37 M 38 LP 39 GND 40 FPBACK 41 P26 42 P27 43 P28 44 P29 45 P30 46 P31 47 P32 48 P33 49 P34 50 P35 Note-1: Please setting the voltage correctly of individual panel by JP5. 31 Flat Panel Display Interface Mono Color HS-6037 STN- STN- STN- STN- STN-D STN-D SS DD DD TFT TFT TFT TFT HR SS SS DD D D PIN Pin 9/12/16 18 18/24 36-bit 18/24 8-bit 16-bit 8-bit 16-bit 8-bit 8-bit 16-bit 24-bit # Name bit bit bit bit (4bP) (4bP) (4bP) (4bP) 9 P0 D0 UD3 UD7 B0 B0 FB0 FB0 R1 R1 UR1 UR0 UR0 10 P1 D1 UD2 UD6 B1 B1 FB1 FB1 B1 G1 UG1 UG0 UG0 11 P2 D2 UD1 UD5 B2 B0 B2 FB2 FB2 G2 B1 UB1 UB0 UB0 12 P3 D3 UD0 UD4 B3 B1 B3 FB3 FB3 R3 R2 UR2 UR1 LR0 13 P4 D4 UD3 UD3 B4 B2 B4 FB4 SB0 B3 G2 LR1 UR0 LG0 14 P5 D5 UD2 UD2 G0 B3 B5 FB5 SB1 G4 B2 LG1 LG0 LB0 15 P6 D6 UD1 UD1 G1 B4 B6 SB0 SB2 R5 R3 LB1 LB0 UR1 16 P7 D7 UD0 UD0 G2 B5 B7 SB1 SB3 B5 G3 LR2 LR1 UG1 17 P8 UD7 G3 G0 SB2 FG0 B3 UG1 UB1 18 P9 UD6 G4 G1 SB3 FG1 R4 UB1 LR1 19 P10 UD5 G5 G0 G2 SB4 FG2 G4 UR2 LG1 20 P11 UD4 R0 G1 G3 SB5 FG3 B4 UG2 LB1 21 P12 UD3 R1 G2 G4 FG0 SG0 R5 LG1 UR2 22 P13 UD2 R2 G3 G5 FG1 SG1 G5 LB1 UG2 23 P14 UD1 R3 G4 G6 FG2 SG2 B5 LR2 UB2 24 P15 UD0 R4 G5 G7 FG3 SG3 R6 LG2 LR2 25 P16 R0FG4FR0 LG2 26 P17 R1FG5FR1 LB2 27 P18 R0 R2 SG0FR2 UR3 28 P19 R1 R3 SG1FR3 UG3 29 P20 R2 R4 SG2SR0 UB3 30 P21 R3 R5 SG3SR1 UR3 31 P22 R4 R6 SG4SR2 LG3 32 P23 R5 R7 SG5SR3 LB3 33 P24 FR0 34 P25 FR1 41 P26 FR2 42 P27 FR3 43 P28 FR4 44 P29 FR5 45 P30 SR0 46 P31 SR1 47 P32 SR2 48 P33 SR3 49 P34 SR4 50 P35 SR5 35 SHFCLK: Pixel clock .Shift Clock 36 FLM.VSYNC: First line marker 37 M, DE: Panel AC driver control 38 LP, HSYNC: Latch pulse 40 ENABKL: Power sequencing control for enabling the back-light.(high active) 32 � CN26 : 10pin VGA Connector (5x2 Header) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RED 2 GND 3 GREEN 4 GND 5 BLUE 6 GND 7 HSYNC 8 GND 9 VSYNC 10 GND � CN30 : 15pin VGA connector (DB15) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RED 2 GREEN 3 BLUE 4 N/C 5 GND 6 GND 7 GND 8 GND 9 N/C 10 GND 11 N/C 12 N/C 13 HSYNC 14 VSYNC 15 N/C 3.10 IR Connector The HS-6037 provides a 5pin internal IR communication connector as following CN8 pin information. � CN8 : 5pin IR Connector PIN NO. DESCRIPTION 1 VCC 2 FIRRX 3 IRRX 4 GND 5 IRTX 33 3.11 USB Connector The HS-6037 provides two 8pin USB ports. Please refer to the following detail pin information. � CN21: 8pin USB Connector PIN NO. CN21 PIN NO. CN21 1 VCC 2 VCC 3 BD0- 4 BD1- 5 BD0+ 6 BD1+ 7 GND 8 GND 3.13 LAN Interface Connector The HS-6037 provides one external (RJ45) and two internal (Header 5x2) 10/100-based LAN interface connector. Please refer to the following detail of pin information. � CN27 : LAN1 RJ-45 Connector PIN NO. CN22 1 TX+ 2 TX- 3 RX+ 4 N/C 5 N/C 6 RX- 7 N/C 8 N/C 9 GND LAN1: There are three LED indicators provide the running conditions of the LAN with JP17, JP18 and JP19: JP17: LINK LED JP18: ACTIVE LED JP19: SPEED LED 34 CN24/CN25: LAN1/LAN2 10pin Connector (5x2 Header) PIN NO. CN24/CN25 1 VCC 2 LINK 3 RX+ 4 RX- 5 ACT 6 GND 7 SPEED 8 GND 9 TX+ 10 TX- LAN2: There are three LED indicators provide the running conditions of the LAN with JP20, JP21 and JP22 JP20: LINK LED JP21: ACTIVE LED JP22: SPEED LED 35 3.13 UltraⅡSCSI Interface Connector This HS-6037 provides two internal UltraⅡ SCSI connector for all kinds of user application and easy connection, one 68pin female D Sub connector for 16bits UltraⅡ SCSI port. Please reference to the following for detail pin assignment. Pin CN12 Pin CN12 1 +SD12 35 -SD12 2 +SD13 36 -SD13 3 +SD14 37 -SD14 4 +SD15 38 -SD15 5 +SDP1 39 -SDP1 6 +SD0 40 -SD0 7 +SD1 41 -SD1 8 +SD2 42 -SD2 9 +SD3 43 -SD3 10 +SD4 44 -SD4 11 +SD5 45 -SD5 12 +SD6 46 -SD6 13 +SD7 47 -SD7 14 +SDP0 48 -SDP0 15 GND 49 GND 16 DIFFSEN 50 N/C 17 TPW-EX 51 TPW-EX 18 TPW-EX 52 TPW-EX 19 N/C. 53 N/C. 20 GND 54 GND 21 +SATN 55 -SATN 22 GND 56 GND 23 +SBSY 57 -SBSY 24 +SACK 58 -SACK 25 +SRST 59 -SRST 26 +SMSG 60 -SMSG 27 +SSEL 61 -SSEL 28 +SCD 62 -SCD 29 +SREQ 63 -SREQ 30 +SIO 64 -SIO 31 +SD8 65 -SD8 32 +SD9 66 -SD9 33 +SD10 67 -SD10 34 +SD11 68 -SD11 36 3.14 ATX Power Controller Connector The HS-6037 support ATX Power function by CN14. The connector of CN14 can control the 5 pin ATX Power via the extension cable from the Backplane (from the version 6.1). 37 Chapter-4 AWARD BIOS Setup The HS-6037 uses the Award PCI/ISA BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options which could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features. To access AWARD PCI/ISA BIOS Setup program, press key. The Main Menu will be displayed at this time. 38 4.1 Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press to enter the sub-menu. ROM PCI/ISA BIOS (xxxxxxxx) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANGEMENT SETUP IDE HDD AUTO DETECTION PCI CONFIGURATION SETUP SAVE & EXIT SETUP LOAD BIOS DEFAULTS EXIT WITHOUT SAVING LOAD SETUP DEFAULTS Esc : Quit ���� : Select Item F10 : Save & Exit (Shift)F2 : Change Color Note that a brief description of each highlighted selection appears at the bottom of the screen. 39 4.2 Standard CMOS Setup The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, please set the HDD mode to LBA mode. Please use the IDE Setup Utility in BIOS SETUP to install the HDD correctly. Data (mm:dd:yy) : Tru, Jul 20 1999 Time (hh:mm:ss) : 00:00:00 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Primary Master : Auto 0M 0 0 0 0 0 Auto Primary Slave Auto 0M 0 0 0 0 0 Auto : Secondary Master : Auto 0M 0 0 0 0 0 Auto Secondary Slave : Auto 0M 0 0 0 0 0 Auto Drive A : 1.44M , 3.5 in. Drive B : None Base Memory : 640K Extended Memory : 130048K LCD&CRT : Auto Other Memory : 384K Halt On : All Errors Total Memory : 131072K ESC : Quit ���� : Select Item PU/PD/ + / - : Modify F1 : Help (Shift) F2: Change Color 40 4.3 BIOS Features Setup This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. Virus Warning : Disabled Video BIOS Shadow : Enabled CPU Internal Cache : Enabled C8000-CBFFF Shadow :Disabled External Cache : Enabled CC000-CFFF Shadow :Disabled CPU L2 Cache ECC Checking : Enabled D0000-D3FFF Shadow :Disabled D4000-D7FFF Shadow :Disabled Quick Power On Self Test : Disabled D8000-DBFFF Shadow : Disabled Boot Sequence : A,C,SCSI DC000-DFFFF Shadow : Disabled Swap Floppy Drive : Disabled Boot Up Floppy Seek : Enabled Boot Up NumLock Status : On Gate A20 Option : Fast Typematic Rate Setting : Disabled Typematic Rate (Chars/Sec) : 6 Typematic Delay (Msec) : 250 Security Option : Setup PCI/VGA Palette Snoop : Disabled ESC : Quit ����: Select Item OS Select For DRAM > 64MB : Non-OS2 F1 : Help PU/PD/+/-: Modify Report No FDD For WIN 95 : Yes F5 : Old Values (Shift) F2 : Color G6 : Load BIOS Defaults G7 : Load Setup Defaults 41 4.4 Chipset Features Setup This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses. It must be stated that these items should never be altered. The default settings have been chosen because they provide the best operating conditions for your system. You might consider and make any changes only if you discover that the data has been lost while using your system. Auto Configuration : Enabled Auto Detect DIMM/PCI Clk : Enabled EDO DRAM Speed Selection : 60ns Spread Spectrum Modulated : Disabled EDO CASx# MA Wait State : 2 CPU Host Clock : 72 MHz EDO RASx# Wait State : 2 SDRAM RAS-to-CAS Delay : 3 SDRAM RAS Precharge Time : 3 SDRAM CAS latency Time : 3 SDRAM Precharge Control : Enabled DRAM Date Integrity Mode : Non-ECC System BIOS Cacheable : Disabled Video BIOS Cacheable : Disabled Video RAM Cacheable : Disabled 8 Bit I/O Recovery : 1 16 Bit I/O Recovery : 1 Memory Hole At 15M-16M : Disabled Passive Release : Enabled ESC : Quit ����: Select Item Delayed Transation : Disabled F1 : Help PU/PD/+/-: Modify AGP Aperture Size : 64 F5 : Old Values (Shift) F2 : Color F6 : Load BIOS Defaults F7 : Load Setup Defaults 42 4.5 Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship which is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks. PIO means Programmed Input /Output. Rather than having the BIOS issue a series of commands to affect the transfer to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the complete task by them. This is much simpler and more efficient (also faster). IDE HDD Block Mode : Enabled Onboard Serial Port 2 : 2F8/IRQ3 IDE Primary Master PIO : Auto UART Mode Select : Normal IDE Primary Slave PIO : Auto IDE Secondary Master PIO : Auto IDE Secondary Slave PIO : Auto IDE Primary Master UDMA : Auto Onboard Parallel Port : 378/IRQ7 IDE Primary Slave UDMA : Auto Parallel Mode : SPP IDE Secondary Master UDMA : Auto IDE Secondary Slave UDMA : Auto On Chip Primary PCI IDE : Enabled LCD Panel Type : Panel 5 * On Chip Secondary PCI IDE : Enabled USB Keyboard Support : Disabled Init Display First : PCI Slot Power ON Function : Button Only ESC : Quit ����: Select Item KBC input clock : 8M F1 : Help PU/PD/+/-: Modify F5 : Old Values (Shift) F2 : Color Onboard FDC Controller : Enabled F6 : Load BIOS Defaults Onboard Serial Port 1 : 3F8/IRQ4 F7 : Load Setup Defaults *It allows the system BIOS to select one of sixteen LCD panel types upon power up. 43 Panel# Panel Type 0 1024*768 Dual Scan STN Color Panel 1 128*1024 TFT Color Panel 2 640*480 Dual Scan STN Color Panel 3 800*600 Dual Scan STN Color Panel 4 640*480 Sharp TFT Color Panel 5 640*480 18-bit TFT Color Panel 6 1024*768 TFT Color Panel 7 800*600 TFT Color Panel 8 800*600 TFT Color Panel 9 800*600 TFT Color Panel 10 800*600 Dual Scan STN Color Panel 11 800*600 Dual Scan STN Color Panel 12 1024*768 TFT Color Panel 13 1280*1024 Dual Scan STN Color Panel 14 1024*600 Dual Scan STN Color Panel 15 1024*600 TFT Color Panel 44 4.6 Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. ACPI Management : Disabled ** Reload Global Timer Events ** Power Management : User Define IRQ3 [3-7, 9-15], NMI : Disabled PM Control by APM : Yes Primary IDE0 : Disabled Video Off Method : V/H Sync + Blank Primary IDE1 : Disabled Video Off After : Standby Secondary IDE0 : Disabled MODEM Use IRQ : 3 Secondary IDE1 : Disabled Doze Mode : Disabled Floppy Disk : Disabled Standby Mode : Disabled Serial Port : Enabled Suspend Mode : Disabled Parallel Port : Disabled HDD Power Down : Disabled Throttle Duty Cycle : 62.5% PCI/VGA Act-Monitor : Disabled Soft-off by PWR-BTTN : Instant-off Power On by Ring : Enabled Resume by Alarm : Disabled ESC : Quit ����: Select Item F1 : Help PU/PD/+/-: Modify IRQ8 Break Suspend : Disabled F5 : Old Values (Shift) F2 : Color F6 : Load BIOS Defaults F7 : Load Setup Defaults 45 4.7 PnP/PCI Configuration Setup In this section, the PnP/PCI configuration setup allows you to configure the ISA and PCI devices installed in your system by manually or auto. PnP OS Installed : No Resources Controlled by : Auto Reset Configuration Data : Disabled ESC: Quit ����: Select Item F1 : Help PU/PD/+/-: Modify F5 : Old Values (Shift) F2 : Color F6 : Load BIOS Defaults F7 : Load Setup Defaults 46 Chapter-5 Software Utilities This chapter provides the detailed information of VGA and LAN function. How to install the configuration is also included. Section include: n VGA DRIVER INSTALLATION n NETWORK DRIVER INSTALLATION n SCSI DRIVER INSTALLATION 47 5.1 VGA DRIVER INSTALL FOR WIN95&98 1. Click Start, then Setting, then Control Panel. Start the Display applet program. 2. Select the setting page, push the advanced properties button. Push the change button in the adapter area. 3. Continue to click “Next”. Select Display a list of all drivers in a specific location, So you can select the drivers you want. Click “Next”. 4. Select the Specify a location checkbox and click “Browse”. 5. Specify the path to the new driver and press the key. (if in driver A:, select a:\win95) 6. The Select device dialog box will appear. Select Chips and Tech. 69000 PCI 7. Continue choosing close until asked to restart machine. 8. After the system has restarted, you can go back into the display applet and select alternate screen resolutions and color depths. Note: Installation procedure for Windows 98 is similar to Windows95. 48 49 50 5.2 VGA DRIVER INSTALL FOR WIN NT4.0 1. Click the Start button, then go to Setting and click on Control Panel. Click on Display icon to start the Display Properties Window. 2. Click on the Settings tab, and then click on Display Type. 3. In the Change Display Type window, click on “Have Disk”. 4. Specify the path to the new driver and press the key. (if in driver A:, type a:\nt40) Select Chips Video Accelerator (655545/48/50/54/55/68554 69000) 5. Click OK or press Enter 6. You will see warning panel about Third Party Drivers. Click on Yes to finish the installation. 7. Once the installation is completed, the system must shut down and restart for the new driver to take effect. 8. After restart, checking on the VGA driver, the properties of the driver should look similar to the following figure. 51 52 53 54 5.3 NETWORK DRIVER INSTALL FOR WIN98&95 Win98 Windows 98 will detect the network driver automatically. Win95 1. Click Start, then Setting, in the “Setting” select Control panel. Start the network applet program. 2. In the Network window, click “Add”. 3. In the Select Network Component Type, select Adapter then click “Add”. 4. When the Select Network Component Type, Select Adapter, then click “Add”. 5. Specify the path the new driver and press key.(If in driver a:, type a:\) (If you’re not sure exactly where the drivers are, choose the “Browse” button and find it) Select Intel EtherExpress PRO/100+ Management Adapter 6. Click OK. 7. Windows 95 will copy the network drivers to the proper directories on your system. 8. Continue choosing “OK”, util asked to restart your system. 9. After restart, checking on the network driver , the Properties of the driver should look similar to the following figure. 55 56 57 5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0 1. Click the Start button, then go to Setting and click on Control Panel. Click on the Network icon to start the Network Window. 2. Click on the Adapters tab, and then click “Add”. 3. In the Select Network Adapter window, click “Have Disk”. 4. This will bring up the Insert Disk window. 5. Supply the directory where the Windows NT driver files are located. (If in driver a: , type a:\) 6. The Select OEM Option window will show up. Select Intel EtherExpress PRO Adapter 7. Click OK to finish the installation. 8. Once the installation is completed, the system must be shut down and restarted for the new driver to take effect. 9. After restart, checking on the Network driver, the Properties of the driver should look similar to the following figure. 58 59 5.5 ULTRAⅡSCSI INSTALL FOR WIN95 & 98 WINDOWS 98 WINDOWS 98 will detect the SYMBIOS LOGIC 895 UltraⅡ SCSI driver WINDOWS 95 1. Click Start, then Setting, in the “Setting” select Control panel. Start the System applet program. Select Device Manager page. 2. In the “Other Device“ double click left button, select PCI SCSI Bus Controller, then click Properties. 3. In the PCI SCSI Bus Controller Window, select Driver page. Click Update Driver. 4. In Update Driver Wizard select YES, then click NEXT. 5. Specify the path to the new driver and press (If in driver a: , click Finish.) (If you want to search for a different driver manually, click “Other Location” and click “Browse”.) 6. Windows 95 will copy the SCSI drivers to the proper directories on your system. 7. Continue choosing “OK”, util asked to restart your system. 8. After restart, checking on the SCSI driver, the properties of the driver should look similar to the following figure. 60 61 62 63 5.6 ULTRAⅡSCSI INSTALL FOR WINDOWS NT 4.0 1. Change Boot sequence in CMOS Setup Utility select CDROM. 2. Boot from CDROM (WINDOWS NT 4.0) 3. When WINDOWS NT SETUP start, press “F6”. 4. To specify additional SYMBIOS SCSI adapter, press “S”. 5. In square windows select “Other”. 6. Insert SCSI driver disk into Driver A: , press “ENTER“ when ready. 7. WINDOWS NT 4.0 will continue to setup until finish. 64