BOSER HS-5200
Specifications
System Chipset
SiS 5571
Form Factor
Half-Size PISA
Half-size form factor
Video Chipset
C&T 65550
Alarm
Beeping alarm when CPU's temperature over heating limited
ATX Power
ATX power control
BIOS
Award BIOS, Y2K compliant, DMI, Plug and Play
Bus Interface
PISA
Bus Speed
66MHz
Cache Size
512KB pipeline burst catche memory
Chipset
SiS 5571
Dimensions
7.3" x 4.8" (185mm x 122mm)
Extra Power
One 8-pin power connector
Humidity
5% to 95%
IrDA
One IrDA TX/RX header
Keyboard
PS/2 6-pin Mini Din or 5-pin header
Memory
Two 72-pin DIMM sockets, Max. 128MB SDRAM
Mouse
PS/2 6-pin Mini Din
Onboard IDE
Four IDE disk drives support Mode 3/4, transfer rate up to 16.6MB/sec
Onboard Multi I/O
SMC 37C669 supporting IrDA, one SPP/EPP/ECP parallel port, two RS-232 serial ports all including 16C550 UART with 16byte FIFO
Onboard SSD
DIP socket supports 2MB~144MB DiskOnChip Flash Disks
Onboard VGA
C&T65550 VGA controller that comes with 1MB embedded SDRAM VGA. memory and CRT/LCD Panel support up to 1024 x 768 256 colors
Power Consumption
6A@+5V, 120mA@+12V, 50mA@-12V
Power Voltage
+5V (4.75~5.25V), +12V, -12V
Processor
Intel Pentium
Processor Socket
Socket 7
Processor Speeds
75~300MHz CPU for Intel Pentium MMX, AMD K6, Cyrix 6x86
Temperature
0°C to 60°C
USB
Support two USB ports
Watchdog Timer
Set 1, 2, 10, 20, 110, 220 seconds, activity trigger with Reset or NMI
Features
- 2M-bit Y2K compliant Award BIOS
- 66MHz bus speeds
- C&T65550 VGA controller with 1MB embedded VGA memory
- Half-size, PISA Bus standard
- Parallel port and two 16C550 UART compatible serial ports
- SMC 37C669 Multi I/O supporting IrDA and floppy interfaces, one SPP/EPP/ECP
- Socket 7 for Intel Pentium MMX, AMD K6, and Cyrix 6x86 CPUs 75~300MHz
- SSD interface supporting 2MB~144MB DiskOnChip Flash Disks
- Switch power regulator
- Two 72-pin DIMM sockets supporting up to 128MB SDRAM
Datasheet
Extracted Text
Specifications are subject to change without notice. HS-5200 Socket 7 Half-size Board with VGA & CTA IDE Panel COM 2 Parallel Internal CRT 8-pin Power In Socket 7 USB C&T 65550 5-pin Keyboard CRT CRT/Panel FDD IrDA USB PS/2 Mouse DOC SIMM Socket WDT SiS 5571 DS12C887 CTA COM 1 Award BIOS DiskOnChip PS/2 Keyboard Features Specifications TM TM R R * DiskOnChip : DiskOnChip 75~300MHz CPU for Intel * CPU: 75~300MHz CPU for Intel TM R TM R socket supporting memory sizes Pentium MMX , AMD K5/K6 Pentium MMX , AMD K5/K6 of up to 288MB Two SIMM sockets with a maximum * Bus Interface: PCI-ISA Bus * BIOS: Award PnP Flash BIOS capacity of 128MB * Memory: Two SIMM sockets * Watchdog Timer: Sets 1, 2, 10, 20, IDE controller supporting four IDE providing up to 128MB 110, 220 seconds activity trigger disk drives * Cache Memory: 512KB pipeline with Reset or NMI PnP I/O address & IRQ selection burst * CMOS: DS12C887 or equivalent Two RS-232 serial ports * Chipset: SiS 5571 device Onboard SMC 37C669 super I/O * I/O Chipset: SMC 37C669 * DMA Channels: 7 chipset * VGA: C&T 65550 with 1MB memory * Interrupt Levels: 15 Onboard C&T 65550 CRT/Panel supporting CRT/Panel displays up * Extra Power: One 8-pin connector display controller to 1024 x 768 at 16 colors * Power Voltage: +5V(4.75V to Switching power regulator * IDE: Four IDE disk drives 5.25V), +12V, -12V Supports CPU Temperature Alarm supporting Mode 3/4 with transfer * Maximum Power Consumption: (CTA) rate up to 16.6MB/sec +5V@6A,+12V@120mA, * FDD: Supports up to two floppy disk -12V@50mA drives * Operating Temperature: 0~60 C * Parallel: One enhanced * CPU Temperature Alarm: Beeping bi-directional parallel port alarm when CPU temperature supporting SPP/ ECP/EPP over heating limited * Serial Port: 16C550 UART- * Board Size: 18.5 x 12.1 cm compatible RS-232 x 2 serial ports with 16byte FIFO Ordering Guide * IrDA: One IrDA TX/RX header HS-5200 * USB: Two USB ports R Half-size Pentium PCI-ISA SBC * Keyboard: PS/2 6-pin Mini DIN or with CRT/Panel 5-pin connector * Mouse: PS/2 6-pin Mini DIN BOSER Technology Co., Ltd. 15F-6, No. 77, Hsin Tai Wu Road, Sec. 1 Hsichih, Taipei Hsien 221 Taiwan TEL : 886-2-26983333 FAX : 886-2-26983300 http://www.boser.com.tw http://www.isb.com.tw E-Mail:webmaster@boser.com.tw Architectural Expertise Beyond IPC
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the HS-5200?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods