Manufacturers
BOSER BPW-8310
Description
Boser BPW-8310 120W AC-DC Open Frame ATX Power Supply Requiring 38CFM Forced Air Cooling
Part Number
BPW-8310
Price
Request Quote
Manufacturer
BOSER
Lead Time
Request Quote
Category
Power Supply
Specifications
Altitude
0~10,000ft
Dimensions
15.24 x 8.381 x 4.0 cm. Tolerance specified is +/-0.4mm
Efficiency
The efficiency is higher than 70% while measuring at nominal line and rated load
Hold Up Time
The hold up time is longer than 16mS at 115VAC input and rated load
Input Current
The maximum input current is 3A at 115VAC or 1.5A at 230VAC
Input Frequency
The range of input frequency is between 47Hz to 63Hz
Input Voltage
The range of input voltage is from 90VAC to 260VAC
Inrush Current
The inrush current is less than 30A at 115VAC input or 60A at 230VAC input, cold start at 25°C
Line Regulation
The line regulation is less than +/-1% at rated load with +/-10% change in input voltage
Load Range
At the factory, the +5V output is set between 5.08V to 5.13V and all output at 60% rated load and the other outputs are checked to be within the accuracy range. The maximum total combined output power on the 3.3V and 5V rails is 70W, and the max. load cannot be exceed 120W
Load Regulation
The load regulation for +5V is less than +/-2%, for +12V is less than +7%~-3%, for -12V is +8%~-3%, +3.3V is less than +/-5% while the measuring is done by changing the measured output loading +/-40% from 60% rated load, and keep other output is at 60% rated load
Over Voltage Protection
For some reason the power supply fails to control itself, the build-in over voltage protection circuit will shut down and into latch off model
Power ON/OFF
The powe supply will be turned on when the power On/Off pin is connected to secondary GND
Protection
The power supply will generate the hiccup mode to protect itself against short circuit or over load condition, and will return to normal after wrong condition is removed
Ripple And Noise
The peak to peak ripple and noise for +5V, +3.3V output are less than 50mV for +5Vsb is 120mV, for +12V is less than 120mV, for -12V is less than 200mV at ranted load and nominal input, which is measured by a 15MHz bandwidth limited oscilloscope and the each output is connected with 0.47uF capacitor
Temperature
0~+50°C, output power 120W with min. 38CFM forced air, and 85W fan-less
Datasheet
Extracted Text
Power Supply BPW-8310 100W AC-DC Open Frame ATX Power Supply Requiring 18CFM Forced Air Cooling 14.14 0.55 E TRANSFORMER 0V 24V 15.24 Specifications 14.44 0.4 * Input Voltage: 85~264VAC * Input Frequency: 47~63Hz * Input Current: 3A at 115VAC or 1.5A at 230VAC max. * Input Current: < 30A at 115VAC input or < 60A at 230VAC input at Measuring the screw o 25 C cold start protrusion first: 1.5 * Load Range: With the +5V output set between 5.08~5.13V and all 3.87 screw output at 60% rated load, while the other outputs are within the 6.85 1.4 accuracy range; max. total combined output power on the +3.3V and System chassis +5V rails is 70W, with the max. load not exceeding 120W * Ripple and Noise: Peak to peak ripple and noise is < 50mV for +5V and +3.3V outputs, 120mV for +5Vsb, < 120mV for +12V, and 200mV for -12V at rated load and nominal input Use #6-32 screw Protrusion limits * Line Regulation: < +/-1% for rated load with a +/-10% change in 2.5mm x4 input voltage * Load Regulation: < +/-2% for +5V, < +7~-3% for +12V, < +8~-3% for -12V, < +/-5% for +3.3V with measured output load changing within +/-40% and 60% rated load, while keeping other outputs at 60% rated load * Hold Up Time: > 16ms at 115VAC input and rated load * Power ON/OFF: Turns on power supply when power on/off pin is connected to secondary GND Pin Output Pin Output * Efficiency: > 70% at nominal line and rated load 1 Power ON/OFF 1~3 +5V 2 GND 4~8 GND * Altitude: 10,000 feet 3 +5Vsb 9~10 +12V * Protection: Hiccup mode against short circuit or over load 11~13 +3.3V conditions auto recovery when fault conditions are removed 14 -12V o * Temperature: 0~50 C, output power is 100W with 6CFM forced air, o 120W with 18CFM forced air (operating); -40~+85 C (storage) Min. Rated Max. * Connectors: Output Tolerance Load Load Load AC Input: Molex 5273-05A withdraw 2-pin or equivalent device +5V 1A 8A 14A 4.9~5.1V DC Output: TB2 is Molex 5273-14A or equivalent device; TB3 is +12V 0A 2.5A 6A 11.25~12.75V -12V 0A 0.5A 1A -11.25~-13V Molex 5045-03A or equivalent device +3.3V 0A 8A 12A 3.1~3.5V * Dimensions: 8.38 x 15.24 x 3.97 cm. Tolerance at +/-0.4mm +5Vsb 0A 0.75A --- 4.8~5.2V Safety Standards * Safety: UL 1950, CSA 22.2 No.234, VDE EN 60 950 * EMI: FCC Class B, EN55022B * EMS: Level 3 of IEC-802, 803, 804, 805 8 6.78 1.5 3.15 0.8 6.78 3.3 6.85 0.765 3.8 8.38 2.5
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the BPW-8310?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
BOSER FSP150-50PLA Power Supply - 1U High 150W ATX Power Supply
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods