ASTEC TLP150R-96S24J

process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.02.09.12_147 TLP150 1 of 4 652 TLP150 Series Single output Total Power: 150 W Input Voltage: 85 - 264 VAC # of Outputs: Single Electrical Specifications Special Features Output Adjustment range: • 150 W on main channel ± 10% with only 200 LFM Total regulation: Main output ± 3% • Low profile fits 1U applications (line and load) Auxiliary outputs ± 5% • Active PFC and Fan output ± 10% EN61000-3-2 compliant Turn-on delay @120 Vac input 2.0 s max. • Integrated Or-ing diode Transient response • Active current sharing Main output 5% • Integrated control and 25% to 75% max. dev., 1 ms max. monitoring features step at 0.5 A/µs recovery to 1% • Overcurrent, overvoltage and Temperature coefficient ±0.02%/°C overtemperature protection Overvoltage protection Main outputs 125% ± 5% • Compliance to EN55022-B conducted noise standard Short circuit protection Current limited Continuous • 12 V fan output Minimum output current Singles 0 A • 5 V standby output (optional) Fan voltage output See Note 9 12 V @ 0.5 A • RoHS compliant • 2 year warranty Standby output See Note 9 5 V @ 1.0 A Input Input voltage range: Universal input 85-264 Vac Input frequency range: 47-63 Hz Safety Input surge current: 264 Vac (cold start) 40 A max. • VDE EN60950-1/IEC60950-1 Safety ground leakage current: 264 Vac, 50 Hz 1 mA • UL60950-1/CSA22.2 Input current: No. 60950-1 120 Vac @ 250 W 1.8 A rms 230 Vac @ 250 W 0.8 A rms Input fuse: UL/iEC127 T 3.15 A, 250 Vac process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.02.09.12_147 TLP150 EMC Characteristics 2 of 4 652 Conducted emissions: EN55022, FCC part 15 Level B harmonic current correction: EN61000-3-2 Compliant ESD air: EN61000-4-2 Level 3 ESD contact: EN61000-4-2 Level 3 Fast transients: EN61000-4-4 Level 4 Surge: EN61000-4-5 Level 3 EN61000-4-6 Level 3 Conducted immunity: General Specifications Hold-up time: 85 Vac @ 60 Hz 20 ms @ 150 W Efficiency: 115 Vac @ 150 W 81% typ. 230 Vac @ 150 W 84% typ. Isolation voltage: Input/output 3000 Vac Input/chassis 1500 Vac Safety approvals: UL/cUL UL60950-1/CSA22.2 No. 60950-1 (see note 6) VDE EN60950-1/IEC60950-1 Weight: 260g (9.2 oz) MTBF (@25 ºC) Telcordia SR-332 900,000 hours min. MIL-HDBK-217F 350,000 hours min. Environmental Specifications Thermal performance: Operating ambient, 0° C to +70 °C (See derating curve) Non-operating -40 °C to +85 °C 0 °C to 50 °C ambient, 150 W 200 LFM forced air 0 °C to 50 °C ambient, 100 W convection cooled 50 °C to 70 °C ambient, Derate linearly to 50% load Relative humidity: Non-condensing 5 - 95% RH Altitude: Operating 10,000 feet max. Non-operating 30,000 feet max. Vibration (See Note 7): 5 - 500 Hz 2.4 G rms peak Shock: per MIL-STD-810E 516.4 Part IV process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.02.09.12_147 Ordering Information TLP150 (3) (9, 10) 3 of 4 652 Output Output Currents Ripple Total Model Numbers (1, 4) (2,4) Voltage Regulation Min Max (free air) Max (forced air) 12 V 0 A 8.4 A 12.5 A 120 mV ± 3.0% TLP150R-96S12J 24 V 0 A 4.2 A 6.3 A 240 mV ± 3.0% TLP150R-96S24J 36 V 0 A 2.7 A 4.2 A 360 mV ± 3.0% TLP150R-96S36J 48 V 0 A 2.1 A 3.2 A 480 mV ± 3.0% TLP150R-96S48J Notes 1 Free air convection. Maximum continuous output power not to exceed 100W. Refer to DERATING CURVE Output Power (Watts) Figure 1 for the derating curve. 2 200 LFM forced air cooling from the ac input side. Maximum continuous output power not to exceed 150 W. 150 W 3 Figure is peak-to-peak for room temperature rating. Output noise measurements are 200 LFM (1.0 m/s) made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 µF FORCED AIR COOLING tantalum capacitor and a 0.1 µF ceramic capacitor. 100 W 4 CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. For optimum reliability no part of the heatsink should exceed 75 W 115 °C and no semi-conductor case temperature should exceed 120 °C. 5 No external filtering required during conducted emissions testing but some applications may require additional filtering to achieve system compliance. Compliance with NATURAL CONVECTION COOLING 50 W radiated EMI specifications may require mounting in a suitable enclosure. 6 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 7 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G 8 Replace the ‘J’ at the end of the model number with ‘FJ’ when the optional standby 0 W output and/or remote ON/OFF control is required 0 C 10 C 20 C 30 C 40 C 50 C 60 C 70 C e.g. TLP150R-96S12FJ. 9 12 V (fan) present when main output is present. An optional 5 Vsb (standby) output is available whenever ac input is present, regardless of remote ON/OFF signal status. 10 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. 11 NOTICE: Some models do not support all options. Please contact your local Emerson Figure 1: Derating Curve Network Power representative or use the on-line model number search tool at http://www.Emerson.com/EmbeddedPower. 12 Power good signal required 100 mA load on the main output (check with engineering on all models). Outline Dimensions 5.000 (127.00) 4.550 (115.57) J3 1 1 FAN J1 1 Neutral J4 Live 1 1 Trimmer Adjust J301 R88 J2 Output Voltage Ground/Earth Total Height 0.225 (5.72) 1.250 (31.75) ø0.156 (4 Places) Figure 2: Mechanical Drawing Dimensions in Inches (mm) 3.000 (76.20) 2.550 (64.77) 0.225 (5.72) process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.02.09.12_147 TLP150 Connector and Mating Connector Types 4 of 4 652 Americas Connector Type Mating Connector Type 5810 Van Allen Way Molex 09-65-2038 (5273 series) Molex 09-52-4034 (5239 series) or equivalent with Carlsbad, CA 92008 J1 void pin 2 or equivalent Molex 08-52-0072 (2478 series) or equivalent crimp terminals USA AMP 63849-1 or equivalent AMP 2-520263-4 or equivalent Telephone: +1 760 930 4600 J2 (6.35 mm straight) (straight spade for 22-18 AWG wire) Facsimile: +1 760 930 0698 Molex 09-65-2068 (5273 series) Molex 09-52-4064 (5239 series) or equivalent with J3 or equivalent Molex 08-52-0072 (2478 series) or equivalent crimp terminals Europe (UK) Waterfront Business Park Molex 22-23-2061(6373 series) Molex 22-01-3067 (2695 series) or equivalent with Merry Hill, Dudley J4 or equivalent Molex 08-50-0113 ( 2759 series) or equivalent crimp terminals West Midlands, DY5 1LX Leoco 2421P04H000 (2421 series) Leoco 2420S04000 (2420 series) or equivalent United Kingdom or equivalent with Leoco 2453TPB00V1 (2453T series) or equivalent crimp terminals Telephone: +44 (0) 1384 842 211 J301 or Facsimile: +44 (0) 1384 843 355 (Optional) JST EHR-4 (EH series) or equivalent with JST SEH-001T-P0.6 (EH series) or equivalent crimp terminals Asia (HK) Molex 22-23-2021(6373 series) Molex 22-01-3027 (2695 series) or equivalent with Fan 14/F, Lu Plaza or equivalent Molex 08-50-0113 (2759 series) or equivalent crimp terminals 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Pin Connections Facsimile: +852 2176 3888 J1 Pin Connections J3 Pin Connections For global contact, visit: Pin 1 Neutral www.Emerson.com/EmbeddedPower Pin 1 RTN Main Return techsupport.embeddedpower Pin 2 Live Pin 2 RTN Main Return @emerson.com J2 Tab Connections Pin 3 RTN Main Return While every precaution has been taken to ensure Pin 4 Vo +Main Output Tab Ground/Earth accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims Pin 5 Vo +Main Output all liability for damages resulting from use of this information or for any errors or omissions. Pin 6 Vo +Main Output J4 Pin Connections Emerson Network Power. Pin 1 -S -Vo Remote Sense The global leader in enabling business-critical continuity. Pin 2 DC OK DC Power Good Signal Pin 3 PW OK Power Good* AC Power Pin 4 LS Load Share Signal Connectivity Pin 5 +S +Vo Remote Sense DC Power Pin 6 SGND Signal Common Embedded Computing J301 Pin Connections (Optional) Embedded Power Pin 1 5 Vsn Standby Voltage Monitoring Pin 2 SGND Signal Common Outside Plant Pin 3 Reserved Do Not Connect Power Switching & Controls Pin 4 PS OFF Remote ON/OFF Signal Precision Cooling Fan Pin Connections Racks & Integrated Cabinets Pin 1 + 12 V Fan Voltage Services Pin 2 +SGND Return Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co.