ASTEC SA202-3530-288

Description
Astec's SA202-3530-288 Model, input voltages: 90 to 135VAC, 180 to 265VAC, auto range: AC input: 85VAC, input range: 180 to 265VAC, auto select frequency: 47 to 63Hz, the storage temperature: -40 degrees Celsius to +70 degrees Celsius, and the maximum power is 200.
Part Number
SA202-3530-288
Price
Request Quote
Manufacturer
ASTEC
Lead Time
Request Quote
Category
Power Supply
Features
- +5 VSB Standby supply (SELV)
- 3.3V output
- ATX 20 pin connector
- Built-in EMI filter (CISPR 22 Class B)
- CE Mark
- EC801-2,-4,-5
- EN61000-3-2 compliant
- Energy Star
- High efficiency
- High MTBF
- Power good signal
- Remote On/Off (ROO)
Datasheet
Extracted Text
200W Platform with PFC SA202-3556 Total Power 200 Watts 90 - 135 VAC Input voltage 180-265 VAC # of Outputs Six Product may vary slightly from photo ELECTRICAL SPECIFICATIONS SPECIAL FEATURES • EN61000-3-2 compliant Input • CE Mark Input range............................90-135 / 180-265 VAC Switch select • 3.3V output Frequency ............................47-63 Hz • +5 VSB Standby supply (SELV) Input current..........................5 A @ 115 VAC; 3 A @ 230 VAC • ATX 20 pin connector o Peak inrush current ..............<40 A peak @ 135 V, cold start at 25 C • Remote On/Off (ROO) Efficiency ..............................>65% @ full load, nominal line • Energy Star EMI/RFI ................................FCC Part 15, Subpart B Class B and • High efficiency CISPR 22 • High MTBF • Built-in EMI filter (CISPR 22 Class B) Output • EC801-2,-4,-5 Maximum power....................200 W • Power good signal Hold-up time..........................17 ms at full load @ 115 VAC 20 ms at full load @ 230 VAC Transient response ..............All outputs shall stay within regulation for 20% load change from 10 Hz - 1 KHz and 50% duty cycle condition ENVIRONMENTAL Overvoltage protection..........+3.3 V - trip point <4.3 V +5 V - trip point <6.5 V o o +10 C to +50 C ambient +12 V - trip point <15.6 V Recycle AC or PS-On to reset o o Short circuit protection ..........Latch off on main outputs if one of the Storage Temperature: -40 C to +70 C mains short circuit to common (R <0.03 Ohm), but +5 VSB shall remain normal. Cooling: Self-contained fan Recycle AC or PS-On to reset Leakage current ....................<1 mA @ 250 VAC to GND MTBF: >100,000 hours at 75% load and o Power good signal ................TTL compatibility. Power good sign goes 25 C ambient conditions high after turn-on 100-500 ms. Signal goes low at least 1 ms before loss of regulation Remote On/Off SAFETY PS-On ..................................Active low, to turn main outputs on. TTL compatibility. UL/CUL TUV NEMKO CE Mark (LVD) CB Report USA: 1-888-41-ASTEC Europe (UK): +44(0)1384-842211 Asia (HK): 852-2437-9662 “PRELIMINARY” 200W PLATFORM WITH PFC ASIA EUROPE AMERICAS 6F., CDW Building Astec House, Waterfront Business Park 5810 Van Allen Way 382-392 Castle Peak Road Merry Hill, Dudley Carlsbad, CA 92008 Tsuen Wan, N.T., Hong Kong West Midlands, DY5 1LX, UK Telephone: 760-930-4600 Telephone: 852-2437-9662 Telephone: +44(0)1384-842211 Facsimile: 760-930-0698 Facsimile: 852-2402-4426 Facsimile: +44(0)1384-843355 “PRELIMINARY” SPECIFICATIONS FOR SA202-3556 Output Voltage Regulation Minimum Maximum Peak Ripple 3 4 Load Load Load P/P(PARD)1 2 V1 +3.3 V +/-5% 0.3 A 14.0 A — 50 mV 2 V2 +5 V +5 / -4% 1.5 A 22.0 A — 50 mV V3 +12 V +/-5% 0.2 A 10.0 A 12.0 A 120 mV V4 -12 V +/-10% 0 A 1.0 A — 120 mV V5 -5 V (option) +/-10% 0 A 0.5 A — 50 mV V6 +5 VSB +/-10% 0 A 2.0 A — 100 mV 1. Peak-to-peak with 20 MHz bandwidth and 10 uF in parallel with a 0.1 uF capacitor. 2. Total combined power on +3.3 V and +5 V rails is 120 W max. 3. Minimum load requirement must comply to “Load Range” from in the Product Specification - contact factory. 4. +12V peak load ≤ 15s duration 5. Maximum combined current on -5 V and -12 V is 1 A. DRAWINGS PIN ASSIGNMENTS CONNECTOR PIN OUTPUT MATING CONNECTOR P1 Pin 1 +3.3V Molex 39-29-9202 or Pin 2 +3.3V Equivalent Pin 3 COM Pin 4 +5V Pin 5 COM Pin 6 5V Pin 7 COM Pin 8 POK Pin 9 +5VSB Pin 10 +12V Pin 11 +3.3V & RS Pin 12 -12V Pin 13 COM Pin 14 PS-ON Pin 15 COM Pin 16 COM Pin 17 COM Pin 18 -5V Pin 19 +5V Pin 20 +5V P2 Pin 1 COM Alex 9090-4V or Pin 2 COM Equivalent Pin 3 +12V Pin 4 +12V P3, P4, P5 Pin 1 +12V Alex 9090-4V or Pin 2 COM AMP1480426-0 Pin 3 COM Pin 4 +5V P6 Pin 1 +5V AMP171826-4 Pin 2 COM Vertical MT or Pin 3 COM AMP171826-4 Pin 4 +12V Horizontal MT NOTES 1. Specifications subject to change without notice. 2. All dimensions in millimeters 3. Warranty: 1 year 4. Weight: 1.20 kg www.astec.com 3
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the SA202-3530-288?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods