PBE-1400 XTX™ Evaluation Board in ATX Form Factor Features • XTX™ Evaluation Board • 3 x PCIe x1 Lane and 4 x PCI Slots • Support Analog RGB, LVDS and TV-out • 4 x SATA, 6 x USB 2.0 Ports, 4 x Serial Ports (Selectable by Jumper) • Secondary Multi I/O (COM3, COM4) • ALC655 AC97 Audio CODEC • AT or ATX Power Supply • POST Code Diagnostics • 1 x ExpressCard/54 Interface System What is XTX™? XTX™ is an ETX® Component SBC Specification extension. 4 x Serial ATA connectors Storage XTX™ is fully compliant to ETX® Specification except for the X2 (ISA bus) 1 x Ultra ATA100/66/33 port, support 2 IDE devices connector signal definition. The signals on the X2 connector are replaced by new features, such as PCI 1 x Floopy disk drive shared with parallel port Express, SATA, ExpressCard, LPC Bus, Extended Power Management, 6 USB 2.0 devices and Digital Audio. I/O What's included onboard? 4 x COM ports (4 x RS-232; 2 from XTX™ CPU module, Serial Port and 2 from on carrier board 2nd Super IO) The evaluation board is designed in a standard ATX form factor and allows the addition of commercially available add-on cards. It can be used free standing Parallel Port SPP/EPP/ECP mode or simply be mounted in a commercial ATX desktop case. The board includes IrDA 1 x SIR IrDA 1.1 compliant connectors and interfaces for PS/2 Keyboard and Mouse, USB, Serial, Parallel, Ethernet, Sound, Floppy disk and IDE devices. It supports the connection 6 x USB connectors USB Port of a wide variety of visual devices such as Flat Panel LVDS displays, Analog RGB displays and has a TV-out port. Supported storage media include 1 x PS/2 Keyboard connector KB/MS CompactFlash, Disk On Chip and other ATA-based devices such as hard 1 x PS/2 Mouse connector disk and CD-ROM. Power is supplied by means of an AT or an ATX power connector. Additional ATX On/Off soft and Reset switches are included on Expansion Bus 3 x PCIe x1 lane Slots board. All evaluation boards come standard with a Dual LED POST function that monitors and gives information about the BIOS when booting the system. 4 x PCI Slots 1 x ExpressCard/54 Socket Advantage Since the standard ATX form-factor board also uses the ETX® standard, Ethernet commercially available cards can be added. This way you can extend the functionality of off-the-shelf ETX® cores to match your application requirements. 1 x RJ-45 Ethernet connector with LED Functional prototypes can now be used in a very early project stage for hardware evaluation. Software development of a custom ETX® carrier board Audio that integrates all these additional function takes place in a separate effort. Realtek ALC655 6 Channel AC97 Audio CODEC Development time of custom ETX® carrier boards is a minimal effort that takes CODEC/Interface (Audio 1/Audio 2 selectable) normally around one or two months. By using the ETX® Module that starts from a readily available system core, hardware design time and cost is minimized as Display your attention can be focused on parts of the system unique to your application. Analog RGB, LVDS and TV-out connector (depend on Graphics Interface CPU module) Ordering Information PBE-1400 XTX™ evaluation board in ATX form factor Mechanical & Environmental Power AT or ATX power connector Requirement Operating Temp. 0 ~ 60ºC (32 ~ 140ºF) Operating Humidity 0 ~ 90% (non-condensing) 305 x 220 mm (12" x 8.7") Dimensions (L x W) All specifications are subject to change without notice. 1-19 Industrial Chassis SBC Daughterboard Industrial Industrial Wide Computer Rugged Industrial Compact / Backplane/ Box PC Medical PC /Power Convertor Slot Board Panel PC/Monitor Panel PC/Monitor Tablet PC Temperature Motherboard Board on Module Power supply /Mounting Kit