ARBOR Emcore-i411
Specifications
CPU + Chipset
ZFx86 Failsafe 486 CPU core operating at 133, 100, 66 and 33 MHz with 32-bit 33 MHz PCI rev 2.1 compliant. “Northbridge” and “Southbridge” FailSafe internal Boot ROM that allows execution of multiple instruction sets: DRAM clear, Flash erase, executable load and run, provides permanent and fail-safe mechanism.
Dimension (L x W)
145 x 102 mm (5.7" x 4")
Display Chipset
SMI SM712G4AA LynxEM4+
Display Memory
4 MB memory on dye
Display Type
CRT, Flat Panel (TFT, DSTN)
Enhanced IDE
2 ports and up to four ATAPI devices with Ultra DMA 33 Mhz
Expansion Interface
PC/104 (ISA)
LCD Interface
TTL 24-bit
Operating Temperature
0 ~ 60C (32 ~ 140F)
Power Requirement
5 V @ 1A (typical) with 32 MB DRAM and 8 MB Flash disk at 100 MHz
Relative Humidity
Up to 90% @ 55C
Resolution
1024 x 768 24bpp
System Memory
32 MB Synchronous DRAM on board
Weight
0.24 Kg (0.53 Ib)
Features
- 32 MB SDRAM soldered on board
- CompactFlash™ type l/II
- Dual LAN 10/100 Mbps, RTL 8139C
- Flat Panel / CRT support
- ZFx86 FailSafe embedded System on-a-chip
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the Emcore-i411?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Dual Intel Low Voltage Xeon AdvancedTCA Processor Blade, Dual 2.8GHz LV-Xeon AdvancedTCA CPU Blade...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods