ARBOR cPCI-6780VS
Specifications
Form Factor
PICMG
Ethernet Chipset
Intel 82562
System Chipset
Intel ICH2
Video Chipset
Intel 815E
Datasheet
Extracted Text
L C A I O R T M S P U 6U CompactPCI SBCs ® 6U CompactPCI Single Pentium III/Tualatin Host SBC Specifications CPU� Intel SKT-370 FC-PGA2 Pentium III up to 1.26GHz with 512K on-die L2 cache � Intel SKT-370 FC-PGA Pentium III up to 1.0GHz with 256K on-die L2 cache � Intel SKT-370 FC-PGA Celeron up to 1.0GHz with 128K on-die L2 cache FSB � 100/133MHz for Pentium III, 66/100MHz for Celeron Chipset � Intel 815E with ICH2 RAM � Three 168-pin DIMM sockets, up to 512MB un-buffered SDRAM Standards� PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0 CompactPCI Bus � 32-bit/33MHz, TI PCI2050 PCI to PCI bridge Chip� Award 2Mb flash memory VGA Features � Intel PXE pre-boot on Ethernet 4MB � Remote Console LCD/CRT 2.1 Display� cPCI-6780V or VS: Built-in Intel 815E Ethernet� Triple 10/100Mbps Ethernet ports with RJ-45 connector: 2 ports on front � Features � panel by Intel 82559, 1 port on rear panel by Intel 82562 with 815E ICH2 � Standard 6U form factor, 2-slot (8TE/HP) width � built-in MAC Supports up to Socket-370 Pentium III 1.26GHz Tualatin CPU with 512K L2 cache IDE � ATA-100, dual channels, built-in 2.5" ATA HDD housing on front board Three 168-pin DIMM sockets support up to 512MB un-buffered SDRAM Floppy � Standard 34-pin connector on RTM Built-in housing for 2.5" low profile HDD SCSI � LSI 53C895, Ultra-2-Wide SCSI with LVD (cPCI-6780VS) Supports up to 4 USB ports, 4 serial ports, 2 parallel ports USB � USB 1.1, four ports (2 for front, 2 for rear) Supports 7 bus-master PCI devices on CompactPCI bus Front Panel I/Os � PS2 KB, PS2 MS, VGA, LAN1, LAN2, USB x 2, LPT1, COM1, � � COM2 (RS-232) cPCI-6780V & VS built-in AGP 2 x VGA display by Intel 815E chipset Backplane I/O � J2: LCD, J3: KB, MS, COM3, COM4, LPT2, FDD, IDE1, Buzzer, � cPCI-6780VS built-in Ultra-2 Wide SCSI by LSI SYM53C895 controller (rear I/O)� J4: SCSI, J5: VGA, LAN3 (MII), USB x 2, IDE2, AC-97 (model dependant) $$ Ordering Information Hardware � Monitoring CPU temperature, FAN speed, system temperature, Vcore � Monitoring� and DC voltages cPCI-6780V � 6U cPCI High Performance FSB133 All-in-one CPU module with � Watchdog Timer � 1-255 sec or 1-255 min software programmable, can generate system � � on-chip AGP-VGA display � reset. cPCI-6780VS � 6U cPCI High Performance FSB133 All-in-one CPU module with � � on-chip AGP-VGA display and SCSI !"# !"# cPCI-R6780V � Rear I/O Transition Module for cPCI-6780V Form Factor � 6U CompactPCI cPCI-R6780S � Rear I/O Transition Module for cPCI-6780VS Dimensions � 233mm x 160mm (L x W), 2 slots (8HP) wide Note 1: Front CPU modules and rear I/O transition modules are sold separately. Operating Temp. � 0 to 60˚C (inside-chassis temp, CPU type dependant, external air-flow � Note 2: All front boards come with special designed copper heat-pipe heat-sink and DB-44CFH CF transition � required) � daughter board. Storage Temp. � -20 to 80˚C Note 3: CPU, RAM, and HDD are not included. Please contact us for more CPU/RAM/HDD integrated options. Shock � 15G peak-to-peak, 11ms duration, non-operation Vibration � Non-operation: 1.88Grms, 5-500Hz, each axis � Operation: 0.5Grms, 5-500Hz, each axis, with 2.5" HDD Measured Power � 5.88A @ +5V, 3.76A @ +3.3V, 270mA @ +12V, 120mA @ -12V, � Consumption� installed with Pentium III 1GHz CPU and 512MB RAM, without HDD Certificate or Test � CE, FCC class A Rear I/O Transition Modules Model number � Faceplate I/O � On-board I/O cPCI-R6780V (for cPCI-6780V)� COM3 (RS-232), COM4 (RS-232/422/485), LPT2, KB, MS, USB x 2, VGA, LAN3� FDD (34-pin), IDE1 & IDE2 (40-pin), Buzzer (2-pin) cPCI-R6780S (for cPCI-6780VS)� COM3 (RS-232), COM4 (RS-232/422/485), LPT2, KB, MS, USB x 2, VGA, LAN3, SCSI� FDD (34-pin), IDE1 & IDE2 (40-pin), Buzzer (2-pin), SCSI, LC All specifications are subject to change without further notice. 2-13 U D T N I E I R C P S
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the cPCI-6780VS?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Dual Intel Low Voltage Xeon AdvancedTCA Processor Blade, Dual 2.8GHz LV-Xeon AdvancedTCA CPU Blade...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods