L C A I O R T M S P U ® ® 3U CompactPCI Low Power Pentium III/Celeron CPU Module 1 AdvancedTCA Products 2 6U cPCI SBC 3 6U cPCI cPCI-3720A/C42 cPCI-3720A/P82 cPCI-3720B Platforms Celeron Version Pentium-III Version Dual-slot Version 4 3U cPCI Fanless SBC 2.1 Features Standards � PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0 Passive heat-sink design with low power BGA2 Pentium III or Celeron CPU CompactPCI Bus � 32-bit/33MHz, supports 7 bus-mastering devices�� 5 � PCI to PCI bridge: TI PCI2050 Single slot wide base board with CF socket 3U cPCI One 144-pin SO-DIMM socket, up to 256MB RAM Platforms Dual 10/100Mbps Ethernet ports by Intel 82559 controller Chip� Award 2Mb flash memory USB x 2, COM x 2, LPT x 1, PS/2 x 1, IDE x 1 Features� Remote Console Rear I/O supports LAN, COM, USB, LPT, and KB/MS 6 Dual slot extension for 2.5" HDD housing and floppy connection SBC & IMB Ethernet� Dual 10/100Mbps Ethernet ports by Intel 82559, RJ-45 connector IDE � UDMA-33, single channel, with CF socket and 44-pin connector, built-in � � 2.5" ATA HDD housing in 2-slot version Ordering Information Floppy � Standard 34-pin connector on front panel in 2-slot version, optional � � add-on slim type floppy module 7 cPCI-3720A/P82� Low Power Pentium III 850MHz 3U cPCI SBC with active heat-� Industrial � sink, 1-slot width USB � USB 1.1, one on front panel, one via rear I/O Chassis cPCI-3720A/C42 � Low Power Celeron 400MHz 3U cPCI SBC with passive heat-� Front Panel I/Os � PS2 KB & MS, LAN1, LAN2, USB1, COM2 (RJ-45) � sink, 1-slot width Backplane I/O (rear I/O)�COM1 (RS-232/422/485), COM2, LPT, LAN2, KB, MS, USB2 cPCI-3720B/P82 � Low Power Pentium III 850MHz 3U cPCI SBC with active heat-� � sink, 2-slot width cPCI-3720B/C42� Low Power Celeron 400MHz 3U cPCI SBC with passive heat-� 8 Hardware� Monitors CPU temperature, fan speed, system temperature, Vcore � Monitoring� and DC voltages � sink, 2-slot width ETX & Embedded FDD-3720 � Slim type FDD expansion kit for cPCI-3720B series Watchdog Timer � 1-255 sec or 1-255 min software programmable, generates �� Modules cPCI-R3720� Rear I/O transition module for cPCI-3720 � system reset Note 1: Front board and rear I/O board are sold separately. � Watchdog timer status LED � 2: All the above models are not equipped with RAM, HDD and FDD. Other Features � Self-hot-swap support 9 Support Operating � Compatible with Microsoft Windows 98SE, Windows ME, Windows XP, � Network Systems � Windows NT, Windows 2000, Red Hat 7.1, 7.2, Novell, QNX, SCO � Appliance Rear I/O Transition Modules � UNIX, MontaVista Linux Carrier Grade Edition, and VxWorks 5.5 (The � � device drivers for Windows are included on the ADLINK CD. For � � VxWorks BSP, please contact ADLINK.) Model number � Board Depth� Faceplate I/O� On-board I/O cPCI-R3720 � 50mm� COM1, KB/MS, LAN2, USB2� LPT, COM210 IPC Form Factor � 3U CompactPCI Accessories Dimensions � 100mm x 160mm (L x W), 1 or 2 slots wide Specifications Operating Temp. � 0 to 50˚C (internal chassis temp, external air-flow required) Storage Temp. � -20 to 80˚C!!""#$#$ Shock � 15G peak-to-peak, 11ms duration, non-operation CPU� Intel BGA2 mobile Pentium III 700/850MHz with 256K on-die L2 cache � Vibration � Non-operation: 1.88Grms, 5-500Hz, each axis � or mobile Celeron 400MHz with 128K on-die L2 cache � Operation: 0.5Grms, 5-500Hz, each axis FSB � 100MHz Measured Power � 2.8A @ +5V, 2.5A @ +3.3V, 150mA @ +12V (peak value), installed with LP � Chipset � Intel 440MX Consumption� Pentium III 700MHz CPU, 256MB RAM, 2.5" ATA HDD, and cPCI-8217 RAM � One 144-pin SO-DIMM socket, up to 256MB SDRAM Compliance � CE, FCC Class A, HALT 4-4 www.adlinktech.com U D T N I E I R C P S