® Teletilt Cable Installation Accessories Hanger Kits, Adapters, Ties, Clamps, and Hoisting Grips Click-On Hangers Click-On Hanger Hardware Kits Click-On Hangers – Install Cable with One Easy “Click” Click-On Hanger attachment hardware is ® available in 3/8" or M10 sizes. Constructed Specifically designed to support HELIAX coaxial cable, stackable Click-On of stainless steel for durability. Select Hangers install in just minutes and provide a perfect fit that gives your PCS/ hardware length according to planned PCN, cellular, microwave, rural telephony, GSM, or other telecommunica- hanger stack height. tions system a professional appearance, especially in confined spaces. Available in either single or double versions, Click-On Hangers are manufactured of tough UV- ORDERING INFORMATION resistant material and set the standard for durability, simplicity Imperial Metric Stack Height Cable Size of installation, and cost effective- Part Number Part Number (# of hangers) ness. Click-On Hangers are sold 243095-9 243095-11 1 1/2" or 7/8" in kits of 10. 243095-5 243095-7 2 1/2" or 7/8" ORDERING INFORMATION 243095-1 243095-3 3 1/2" or 7/8" Double Single* 243095-12 243095-10 1 1-1/4" or 1-5/8" 243095-8 243095-6 2 1-1/4" or 1-5/8" Part Number Part Number Hanger Description 243095-4 243095-2 3 1-1/4" or 1-5/8" L4CLICK L4SCLICK 1/2" Hanger for LDF4, kit of 10 Each kit contains 10 threaded rods, 20 nuts, 40 flat washers and 40 lock L45CLICK NA 5/8" Hanger for LDF4.5, kit of 10 washers. L5CLICKB L5SCLICKB 7/8" Hanger for LDF5, VXL5, kit of 10 L6CLICK L6SCLICK 1-1/4" Hanger for LDF6, VXL6, kit of 10 ATTACHMENT HARDWARE DIMENSIONS L7CLICK L7SCLICK 1-5/8" Hanger for LDF7, VXL7, kit of 10 Rod Length Rod Length *Contact Andrew for information on hangers complete with angle adapter Part Number (inches) (millimeters) and hardware. 243095-11 3.97 101 243095-7 5.5 141 243095-3 7.1 181 243095-12 5 126 243095-8 7.3 186 243095-4 9.9 251 243095-9 3.75 95 Flat Member Attachment Angle Adapter Attachment 243095-5 5.4 137 243095-1 7 177 243095-10 4.75 121 243095-6 7.25 184 243095-2 9.75 248 Note: Click-On Hangers accommodate two runs of cable and can be stacked up to three deep to handle up to six runs. Round Member Attachment Ceiling Adapter Attachment SUPPORT HARDWARE ORDERING INFORMATION Part Number Hardware Description 243684 Compact Angle Adapter 244350 Ceiling Adapter Andrew Corporation Fax: 214.631.4706 4/4/2005 2601 Telecom Parkway Toll Free Tel: 1.800.676.5342 Page 1 of 4 Richardson, Texas U.S.A. 755082-3521 Fax: 1.800.229.4706 Tel: 214.631.0310 www.andrew.com Information correct at date of issue but may be subject to change without notice. ® Teletilt Cable Installation Accessories Hanger Kits, Adapters, Ties, Clamps, and Hoisting Grips Miniature Click-On Hangers Other Mounting Hardware Fast, easy installation for small cables Threaded Rod Support Kit for Standard Hangers. Use to Now installing small cables into hangers is mount hangers away from accomplished in one easy click with new supporting structure, under cable Miniature Click-On Hangers. bridge, and inside equipment Each compact, Miniature Click-On room. Includes 3/8" diameter Hanger accommodates two runs of threaded rod, galvanized ceiling cable. Miniature Click-On Hangers are mounting plate, nuts, and compact and stackable, making it easy washers. Attach to angle tower to install several runs of cable in confined spaces. members with 31768A angle adapters. Attach to round tower members with Miniature Click-On Hangers are cost effective and durable. With flexible 30848 series tower standoffs. All components are stainless steel, except gripping ribs, the hanger provides secure support on a range of cable sizes, ceiling mounting plate. and indexing on the hanger body helps align cables during installation. ORDERING INFORMATION Specifically designed to accommodate small corrugated coaxial cables, elliptical waveguide, and braided cable runs, Miniature Click-On Hangers Kit of 1 Kit of 5 provide a perfect fit for your installation. Hangers are packed in kits of 10. Part Number Part Number Rod Length–in (mm) Attachment hardware sold separately in kits of 10. 31771 31771-4 12 (305) 31771-9 31771-6 24 (610) – 31771-10 36 (915) Angle Adapter Galvanized and Non-marring For mounting 1/2" to 2-1/4" cable hangers to angle tower members up to 3/4" (19 mm) thick. Hanger attachment hardware sold separately (see above). Kit of 10. ORDERING INFORMATION ORDERING INFORMATION Hanger Part Number Description Part Number Description 247763-I Tapped for 3/8" hardware 68MCLICK Click-On Hangers for 6-8 mm cable; 247763 Tapped for metric hardware FSJ1A, CNT-240, CNT-300, BR-240, BR-300, kit of 10 912MCLICK Click-On Hangers for 9-12 mm cable; LDF1, EFX2, FSJ2, LDF2, CNT-400, BR-400, kit of 10 1316MCLICK Click-On Hangers for 13-16 mm cable; FSJ4, LDF4-50A, CNT-500, CNT-600, BR-600, kit of 10 SUPPORT HARDWARE ORDERING INFORMATION Select hardware by intended hanger stack height. Part Number Hardware Description 252026-10KT Mini Angle Adapters, kit of 10 252027-10KT Single Stack Hardware for Mini Click-On Hangers, kit of 10 252028-10KT Double Stack Hardware for Mini Click-On Hangers, kit of 10 252029-10KT Triple Stack Hardware for Mini Click-On Hangers, kit of 10 Andrew Corporation Fax: 214.631.4706 4/4/2005 2601 Telecom Parkway Toll Free Tel: 1.800.676.5342 Page 2 of 4 Richardson, Texas U.S.A. 755082-3521 Fax: 1.800.229.4706 Tel: 214.631.0310 www.andrew.com Information correct at date of issue but may be subject to change without notice. ® Teletilt Cable Installation Accessories Hanger Kits, Adapters, Ties, Clamps, and Hoisting Grips Compact Stainless Steel Angle Adapters These compact, lightweight, high quality stainless steel angle adapters provide a cost Clamp Head saving option to standard adapters for many ® wireless systems that use HELIAX coaxial ORDERING INFORMATION cable. These compact angle adapters are Part Number Description suitable for use with single runs of HELIAX cable up to 2-1/4" in diameter. When used MF39901-10 Clamp Head, kit of 10 with our stackable Click-On Hangers, they can accommodate up to six runs of HELIAX LDF6 1-1/4" cable or smaller 45° Adapter cable and up to four runs of HELIAX LDF7 1-5/8" cable. Includes 3/8” or Use with angle adapter and threaded rod support kit to place a hanger at a mid-hanger attachment hardware. Kit of 10. waveguide bend. Galvanized steel. Kit of 10. ORDERING INFORMATION ORDERING INFORMATION Part Number Description Part Number Description 243684 Imperial Angle Adapter, kit of 10 42334 45º Adapter, kit of 10 243684-M Metric Angle Adapter, kit of 10 Nylon Cable Ties For Jumper Round Member Adapter Cable Attachment Stainless steel clamps to mount 1/2" to 4" Cable ties secure cable bundles where cable hangers to round support members. space is limited. They are an excellent Two each are needed for 3" and 4" cable choice for organizing jumper cables within and between radio cabinets and for bundling hangers. Kit of 10. jumper cables. Nylon cable ties provide ORDERING INFORMATION support for small diameter cable 1/4" to 1/2". Typical applications include securing jumper cables in buildings and along horizontal antenna mounting Part Number Member Diameter, in (mm) arms. 31670-1 1–2 (25–50) ORDERING INFORMATION 31670-2 2–3 (50–75) 31670-3 3–4 (75–100) Part Number Description 31670-4 4–5 (100–125) 40417 Nylon Cable Ties, 5/16" wide 14.5" long, kit of 50 31670-5 5–6 (125–150) ® 31670-6 6–8 (150–200) Velcro Cable Ties for High Vibration Areas Our Velcro cable ties are the easiest way to organize your in-rack cabling. They’re secure in high vibration Tower Standoff areas and require no special tying procedure. Reuse to accommodate future expansion. Black, Adapters with round member clamps and 8" (203 mm) length. Maximum bundle hardware for 1/2" to 4" hangers. All parts diameter, 2" (51 mm). Minimum bundle are stainless steel or galvanized. Kit of 10. diameter, 0.25" (6.4 mm). Tensile strength, 40 lb (178 N). For ORDERING INFORMATION indoor use only. 1 in (25 mm) 2.5 in (60 mm) Member Diameter Velcro is a registered Standoff Standoff in (mm) trademark of Velcro Industries. 30848-5 – 0.75–1.5 (20–40) ORDERING INFORMATION 30848-4 – 1.5–3.0 (40–75) Part Number Description 30848-1 41108A-1 3–4 (75–100) 30848-2 41108A-2 4–5 (100–125) VCT8-10 Velcro Cable Ties, kit of 10 30848-3 41108A-3 5–6 (125–150) VCT8-50 Velcro Cable Ties, kit of 50 VCT8-100 Velcro Cable Ties, kit of 100 Andrew Corporation Fax: 214.631.4706 4/4/2005 2601 Telecom Parkway Toll Free Tel: 1.800.676.5342 Page 3 of 4 Richardson, Texas U.S.A. 755082-3521 Fax: 1.800.229.4706 Tel: 214.631.0310 www.andrew.com Information correct at date of issue but may be subject to change without notice. ® Teletilt Cable Installation Accessories Hanger Kits, Adapters, Ties, Clamps, and Hoisting Grips Hanger Selection Guide Hanger Type SnapStak™ Hangers Click-On Single, Double, or Support / Cable Ties** Miniature Hangers Hoisting Grips* Construction Stainless steel Engineered plastic single or Tin coated bronze Nylon double Cable runs supported 1 to 3 2 to 6 1 1 Primary applications Towers with pre-punched Rooftops, water towers and Monopole towers Jumper cables and inter-rack cable ladders, snap-in towers with limited space cabling accessories Typical installation time 7 20 2 N/A (minutes)*** Key feature Attaches cables in compact Stackable up to three high Calibrated clamp provides Universal fastening bundles saving tower space permanent cable support Benefits Fastest hanger installation Attaches cables in compact Quick installation Fits most cable sizes and No additional hardware six run bundles tower members needed Attaches cables in compact Versatile and adaptable to Monopole application Quick installation three run bundles almost any application Impervious to environmental Easy to install click-on design Accommodates single run of Inexpensive extremes cable Universal hanger UV stable Accommodates single run of accommodates all corrugated lightweight cable cables Attachment capability 3/4" drilled cable ladder 3/8" (M10) drilled hardware All towers and monopoles Round member (Tower member type) ladder Angle member Cable ladders Various adapters Various adapters Additional parts needed None Threaded rod and hardware None None Tower adapters (allows Cluster mount Round member adapter None required None required hanger attachment to Universal tower adapter Angle adapter various tower types) Anchor rail adapter Conditions * Support Grip or Hoisting/Support Grip required with all cable installations ** Should only be used with 1/2" cable and smaller *** Installation time based on a 100 ft (30 m) run of 7/8" cable with 3 ft (1 m) hanger spacing. Monopole application applied 200 ft intervals, 2 minutes. Andrew Corporation Fax: 214.631.4706 4/4/2005 2601 Telecom Parkway Toll Free Tel: 1.800.676.5342 Page 4 of 4 Richardson, Texas U.S.A. 755082-3521 Fax: 1.800.229.4706 Tel: 214.631.0310 www.andrew.com Information correct at date of issue but may be subject to change without notice.