ANDREW FSJ1-50A
Datasheet
Extracted Text
Product Product Specifications Specifications FSJ1 FSJ1--50A 50A FSJ150A, HELIAX® Superflexible Low Density Foam Coaxial Cable, corrugated copper, 1/4 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE Flexibility Superflexible Inner Conductor Material Copperclad aluminum wire Jacket Color Black Dimensions Nominal Size 1/4 in Cable Length 0 km Cable Weight 0.05 lb/ft | 0.07 kg/m Diameter Over Dielectric 4.826 mm | 0.190 in Diameter Over Jacket 7.366 mm | 0.290 in Inner Conductor OD 1.9050 mm | 0.0750 in Outer Conductor OD 6.350 mm | 0.250 in Electrical Specifications Cable Impedance 50 ohm ±1 ohm Capacitance 24.2 pF/ft | 79.4 pF/m dc Resistance, Inner Conductor 3.000 ohms/kft | 9.843 ohms/km dc Resistance, Outer Conductor 2.000 ohms/kft | 6.562 ohms/km dc Test Voltage 1600 V Inductance 0.200 µH/m | 0.061 µH/ft Insulation Resistance 100000 Mohms•km Jacket Spark Test Voltage (rms) 5000 V Operating Frequency Band 1 – 18000 MHz Peak Power 6.4 kW Pulse Reflection 1% Velocity 84% Environmental Specifications Installation Temperature 40 °C to +60 °C (40 °F to +140 °F) Operating Temperature 55 °C to +85 °C (67 °F to +185 °F) Storage Temperature 70 °C to +85 °C (94 °F to +185 °F) © ©2013 CommScope, 2013 CommScope, Inc. Inc. All All rights rights reserved. reserved. All All trademarks trademarks identified identified by by ® ® or or ™ ™ are are registered registered trademarks, trademarks, respectively, respectively, of of CommScope. CommScope. page page 1 1 of of 3 3 October October 16, 16, 2013 2013 All All specifications specifications are are subject subject to to change change without without notice. notice. See See www.commscope.com www.commscope.com for for the the most most current current information. information. Revised: Revised: July July 26, 26, 2013 2013 Product Product Specifications Specifications FSJ1 FSJ1--50A 50A General Specifications Brand HELIAX® Mechanical Specifications Bending Moment 1.1 Nm | 0.8 ft lb Flat Plate Crush Strength 100.0 lb/in | 1.8 kg/mm Minimum Bend Radius, Multiple Bends 25.40 mm | 1.00 in Minimum Bend Radius, Single Bend 25.40 mm | 1.00 in Number of Bends, minimum 15 Number of Bends, typical 20 Tensile Strength 68 kg | 150 lb Note Performance Note Values typical, unless otherwise stated Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F Average Power, Inner Conductor Temperature 100 °C | 212 °F Attenuation Frequency (MHz) Attenuation (dB/100 m) Attenuation (dB/100 ft) Average Power (kW) 0.5 0.407 0.124 6.40 1 0.577 0.176 6.40 1.5 0.707 0.215 6.40 2 0.816 0.249 6.40 10 1.833 0.559 3.99 20 2.6 0.792 2.81 30 3.192 0.973 2.29 50 4.136 1.261 1.77 88 5.516 1.681 1.33 100 5.889 1.795 1.24 108 6.125 1.867 1.19 150 7.25 2.21 1.01 174 7.825 2.385 0.93 200 8.408 2.563 0.87 300 10.373 3.162 0.71 400 12.051 3.673 0.61 450 12.817 3.906 0.57 500 13.545 4.128 0.54 512 13.715 4.18 0.53 600 14.909 4.544 0.49 700 16.175 4.93 0.45 800 17.362 5.292 0.42 824 17.637 5.376 0.41 894 18.42 5.614 0.40 960 19.134 5.832 0.38 1000 19.556 5.96 0.37 1250 22.044 6.719 0.33 1500 24.326 7.414 0.30 © ©2013 CommScope, 2013 CommScope, Inc. Inc. All All rights rights reserved. reserved. All All trademarks trademarks identified identified by by ® ® or or ™ ™ are are registered registered trademarks, trademarks, respectively, respectively, of of CommScope. CommScope. page page 2 2 of of 3 3 October October 16, 16, 2013 2013 All All specifications specifications are are subject subject to to change change without without notice. notice. See See www.commscope.com www.commscope.com for for the the most most current current information. information. Revised: Revised: July July 26, 26, 2013 2013 Product Product Specifications Specifications FSJ1 FSJ1--50A 50A 1700 26.038 7.936 0.28 1800 26.862 8.187 0.27 2000 28.455 8.673 0.26 2100 29.227 8.908 0.25 2200 29.984 9.139 0.24 2300 30.727 9.365 0.24 2500 32.174 9.806 0.23 2700 33.576 10.233 0.22 3000 35.602 10.851 0.21 3400 38.183 11.638 0.19 3700 40.041 12.204 0.18 4000 41.841 12.753 0.17 5000 47.5 14.477 0.15 6000 52.747 16.077 0.14 8000 62.37 19.01 0.12 8800 65.974 20.108 0.11 10000 71.173 21.693 0.10 12000 79.393 24.198 0.09 14000 87.172 26.569 0.08 15800 93.872 28.611 0.08 16000 94.601 28.833 0.08 18000 101.745 31.01 0.07 * Values typical, guaranteed within 5% Regulatory Compliance/Certifications Agency Classification UL/ETL Certification Compliant RoHS 2011/65/EU Compliant China RoHS SJ/T 113642006 Below Maximum Concentration Value (MCV) ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system © ©2013 CommScope, 2013 CommScope, Inc. Inc. All All rights rights reserved. reserved. All All trademarks trademarks identified identified by by ® ® or or ™ ™ are are registered registered trademarks, trademarks, respectively, respectively, of of CommScope. CommScope. page page 3 3 of of 3 3 October October 16, 16, 2013 2013 All All specifications specifications are are subject subject to to change change without without notice. notice. See See www.commscope.com www.commscope.com for for the the most most current current information. information. Revised: Revised: July July 26, 26, 2013 2013
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the FSJ1-50A?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods