SPECIFICATIONS General ™ MiniModule USB2 • Controller – - NEC μPD720101 USB 2.0 Host Controller High-speed PC/104-Plus module lets you add up to four USB 2.0 devices • Card Support – - Complies with December 2000 USB 2.0 standard - Supports a mix of USB 2.0 and USB 1.1 FEATURES devices • NEC μPD720101 USB 2.0 Host Controller • Special Features – • Compliant with USB 2.0 Specification - High-speed (480Mbps), full-speed (12Mbps) • Provides USB 2.0 host root hub with up to four and low-speed (1.5Mbps) transactions downstream ports - Supports "hot" insertion/removal • All downstream facing ports can handle - Up to four USB 2.0 devices; more devices high-speed (480Mbps), full-speed (12Mbps) and with additional hubs low-speed (1.5Mbps) transactions - Power connector for supplemental +5V DC input as required • Compliant with OHCI USB Rev1.0a • Four Slot Support Option – • Compliant with EHCI for USB Rev 1.0 - Configurable for use in any of the 4 PCI slots • Supports 32-bit 33MHz PC/104-Plus host available to PC/104-Plus systems interface, compliant with PCI Rev. 2.2 • Support Software – • Configurable for any PC/104-Plus bus slot - Plug-and-play drivers with Windows • QuickStart Kit includes board, drivers, and ME/XP/2000/XPe documentation Bus Interface • PC/104-Plus but (PCI), PC/104 bus (ISA) Mechanical ™ The MiniModule USB2 board provides a The card provides both PC/104-Plus and • Size – 90x96mm (3.6x3.8") PC/104-Plus high performance PCI-based platform for PC/104 interfaces, although the PC/104 • Power – (typical) 0.21A @ +5V incorporation of up to four interface is utilized only to pass through bus • Environmental – Operating temperature: 0° to USB 2.0 devices into a PC/104-Plus signals and for mechanical stability. Control 70°C standard; –40° to +85°C extended embedded system. Based on the December signals are all obtained from the PC/104-Plus NOTE: Above do not include USB device power requirements 2000 Version of the USB 2.0 standard, the (PCI) bus. Warranty MiniModule USB2 offers support for the • 3-year warranty The MiniModule USB2 utilizes the NEC latest USB 2.0 devices such as 802.11 WiFi μPD720101 USB 2.0 Host Controller which interfaces or high performance video capture is supported with drivers for a wide range of ORDERING INFORMATION while maintaining backward compatibility popular embedded operating systems. The MODEL DESCRIPTION with earlier USB 1.1 devices. USB 2.0 and MM3-USB2-K-10 QuickStart Kit (board, documentation, card is configurable for use in any of the four USB 1.1 devices can be mixed in the system. software) PCI slots available to PC/104-Plus systems. MM3-USB2-Q-01 MiniModule USB2, 4 USB 2.0 Ports Ampro Computers, Inc. 5215 Hellyer Ave., Ste. 110, San Jose, CA 95138 Tel. 408.360.0200 Fax 408.360.0222 sales@ampro.com NOTICE: The product specifications provided in this data sheet are subject to change without notice. © 2003 Ampro Computers, Inc. All rights reserved. Ampro is a registered trademark and CoreModule, MiniModule, Little Board, and EnCore are trademarks of Ampro Computers, Inc. All other trademarks and registered trademarks are the property of their respective owners. DS-MMUSB2 5K 1003 www.ampro.com