AMPRO LB3-P5E-Q-72
Specifications
Form Factor
EBX
Video Chipset
C&T 65550
Bus Interface
Standalone
CPU Socket
Embedded
Ethernet Controller
SMSC LAN91C96
Processor
Intel Pentium
Video (Display) Chipset
C&T 65550
Features
- 256K level two cache
- 3 programmable counter/timers (8254 equivalent)
- 5 interrupt channels (8259 equivalent)
- 7 DMA channels (8237 equivalent)
- Award ROM-BIOS with Ampro enhancements (See Ampro Embedded-PC Enhancements section)
- Battery backed real-time clock and CMOS setup
- Intel Pentium, 133 MHz VRT, 166 MHz MMX, 200 MHz MMX, 233 MHz MMX
- Shadow RAM support provides fast system/video BIOS execution
- Speaker port with 0.1 watt output
- Standard PC/AT keyboard port
- Supports two 72-pin SIMMs (1 bank) with or without parity
- Supports up to 128 Mbytes, Fast Page or EDO DRAM
Datasheet
Extracted Text
NEW NEW LB3-P5e ™ Little Board /P5e • Exceptional performance, high integration EBX compliant single board system PC/104-Plus PCI CONNECTOR ETHERNET CONTROLLER SCSI CONTROLLER RJ45 ETHERNET CONNECTOR UP TO 128 MBYTES DRAM AUI CONNECTOR POWER CONNECTOR FLAT PANEL CONNECTOR SERIAL PORT 1 & 2 C&T 65550 SCSI INTERFACE VIDEO CONTROLLER ZOOM VIDEO INPUT PRIMARY IDE CONNECTOR CRT CONNECTOR SECONDARY IDE CONNECTOR SERIAL PORT 3 & 4 FLOPPY INTERFACE ® INTEL PENTIUM 133 MHZ VRT, 166 MMX™, UTILITY CONNECTOR 200 MMX, 233 MMX PARALLEL CONNECTOR CPU POWER SUPPLY PC/104-Plus ISA CONNECTOR BYTEWIDE SOCKET The Little Board/P5e sets the standard for Pentium- and rugged construction all make the Little based embedded-PC designs. The extreme power Board/P5e the optimal choice for use in of an Intel Pentium processor is combined with the punishing embedded environments. Additional high bandwidth of a PCI expansion bus, in a reliability enhancements include a watchdog rugged and reliable single-board solution for timer, a power-fail NMI generator, and an embedded applications that demand small size, onboard bootable “solid state disk.” low power consumption, and high functionality. ENHANCED VIDEO SUPPORT This new high-end member of the popular Ampro Now the Little Board/P5e offers up to 2 Mbytes “third generation” Little Board family contains—on of video RAM which supports high resolution a single compact assembly— all the functions of a fully configured PC-compatible system. Included in and true color modes for graphics intensive this highly integrated design are disk, display, applications. network, and SCSI controllers, plus four serial ports A powerful and highly flexible PCI-based display and an enhanced parallel port. controller interfaces with both flat panels and HIGH PERFORMANCE AND RELIABILITY CRTs, and offers full compatibility with five popular video modes: VESA (SuperVGA), VGA, The Little Board/P5e meets the performance EGA, CGA, and MDA. Software programmable and reliability demands of a wide range of fixed, flat panel interface timing accommodates nearly mobile, and portable embedded applications. all LCD and electroluminescent (EL) displays. Compact size, reduced power consumption, wide operating temperature, high quality, Ampro Computers, Inc. • 4757 Hellyer Ave., San Jose, CA 95138 • Tel. (408)360-0200 • Fax (408)360-0222 • sales@ampro.com Depopulated Depopulated Versions Available! Versions Available! SPECIFICATIONS LB3-P5e CPU Intel Pentium, 133 MHz VRT, 166 MHz MMX, 200 MHz MMX, 233 MHz MMX • PC FUNCTIONS 256K level two cache • MEMORY Supports up to 128 Mbytes, Fast Page or EDO DRAM • Supports two 72-pin SIMMs (1 bank) with or without parity • Shadow RAM support provides fast system/video BIOS execution • DMA INTERNAL 15 interrupt channels (8259 equivalent) • 7 DMA channels (8237 equivalent) • 3 programmable counter/timers (8254 equivalent) • KEYBOARD Standard PC/AT keyboard port • Speaker port with 0.1 watt output • REAL TIME CLOCK Battery backed real-time clock and CMOS setup • BIOS Award ROM-BIOS with Ampro enhancements (See Ampro Embedded-PC Enhancements section) • ADDITIONAL ONBOARD FUNCTIONS SERIAL Four FIFO-buffered serial ports with full handshaking (16550 equivalent) • Each channel supports either RS232C (direct connection) or RS485 (via the Ampro RS485 Adapter) • PARALLEL EPP/ECP compatible, bidirectional parallel printer port • FLOPPY Supports 1 or 2 drives • PCI ENHANCED IDE Supports up to four drives • Supports “fast” IDE data transfer modes • PCI ULTRASCSI Adaptec AIC-7860 • Supports SCSI I/II, “UltraSCSI” (20MB/sec), synchronous or asynchronous transfers • BYTEWIDE SOCKET Usable with 32K-1M byte EPROMs, 32K-512K byte Flash EPROMs, 32K-512K byte SRAMs, or • 32K-512K byte NOVRAMs Offboard battery converts SRAM into NOVRAM • Usable with DiskOnChip2000™ read/write flash SSD device • Supports battery-free boot capability CONFIG EEPROM • 512 bits available for OEM use • Utilizes real time clock alarm function WATCHDOG TIMER • Timeout triggers NMI or hardware reset • • Triggers when +5V power drops below +4.7V POWERFAIL NMI PCI DISPLAY CONTROLLER Supports CRT, LCD, and EL displays • C&T 65550 • FOR A COMPLETE LIST OF CONTROLLER ONBOARD DISPLAY RAM 2 MBytes • PANELS SUPPORTED, FLAT PANEL SUPPORT Supports 24-bit “true color” (800 x 600) • PLEASE VISIT OUR WEBSITE “GUI accelerator” for enhanced graphic function performance • Software programmable flat panel interface signal timing • www.ampro.com/support Sequenced LCD power to protect display • Supports DPMS-compatible displays • Optional plug-in LCD bias supply: supplies ±15 to ±35 VDC @ 30 mA; • voltage level adjusted via onboard or external potentiometer ETHERNET LAN INTERFACE Complies with IEEE-802.3 (ANSI 8802-3) • SMC 9000 series CONTROLLER • 10Base-T (twisted pair), via onboard RJ45 connector MEDIA INTERFACE OPTIONS • AUI, via onboard header connector; DB15F transition cable available For ordering information • 10Base2 (thin coax), via external MAU connected to AUI interface • and pricing please refer 10M bits/sec DATA RATE • to Ampro Ordering Can be installed in byte-wide SSD socket REMOTE BOOT ROM • Guide. MECHANICAL 5.75 x 8.0 x 1.2 in. (146 x 203 x 30 mm) • SIZE Power requirements: Contact factory • POWER Operating temperature (Please refer to the Ampro Ordering Guide.) • ENVIRONMENTAL 5% to 95% relative humidity, non-condensing • Storage temperature: –55° C to +85° C • Weight: 11.6 oz. (329 gm) • NOTE: Contact Ampro regarding custom configurations and special order options. NOTICE: The product specifications provided in this data sheet are subject to change without notice. © 1998 Ampro Computers, Inc. All rights reserved. AMPRO is a registered trademark and CoreModule, MiniModule, Little Board, and The Embedded Solutions Provider are trademarks of Ampro Computers, Inc. All other trademarks and registered trademarks are the property of their respective owners. THE EMBEDDED SOLUTIONS PROVIDER™ Ampro Headquarters: 1 (800)966-5200 • www.ampro.com
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the LB3-P5E-Q-72?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods