Computer-On-Module Products Ampro ETX 800 ® Pentium M Computer-on-Module Custom, Rugged, Ultra-High Performance Specifications PROCESSORS • Choice of ® – 1.4GHz Low Voltage Pentium M 738 (Dothan) ® – 1.0GHz Ultra Low Voltage Celeron M 373 (Dothan) – 600MHz Ultra Low Voltage Celeron M • Cache – 2MB or 512kB Level 2 • Chipset – Intel 855GME/ICH4M • FSB – 400MHz • System Controllers – PC-compatible DMA and interrupt controllers and timers • Real Time Clock – Battery-backed RTC/CMOS • Watchdog Timer • Powerfail Reset –Triggers when input voltage Choose Ampro ETX 800 for… Ordering Information drops below predetermined thresholds Rugged, ultra high performance applications that MODEL DESCRIPTION MEMORY require a custom footprint and connectorization, • DRAM – Up to 1GB PC2700 DDR333 ET1-800-K-02 600MHz QuickStart Kit (Q-02 SODIMM but with very short time to market and little time Module, 512MB RAM, Software, for a full custom solution. Documentation, Ampro ATX Base- BUS INTERFACE board) • PCI Description ET1-800-K-10 1.0GHz QuickStart Kit (Q-10 Mod- I/O Ampro ETX 800 is a small ultra high-performance, ule, 512MB RAM, Software, Docu- • EIDE –Dual PCI-bus Enhanced Ultra DMA ® low-power Centrino processor module with mentation, Ampro ATX Baseboard) 33/66/100 Synchronous IDE Interface supports up to two hard drives advanced networking and high-performance ET1-800-K-22 1.4GHz QuickStart Kit (Q-22 Mod- • Serial – 2 ports, TTL, transceivers on baseboard ule, 512MB RAM, Software, Docu- graphics in a modular format that plugs properly mentation, Ampro ATX Baseboard) • Parallel – EPP/ECP bidirectional port into your custom baseboard by offering a • Floppy – Supports 1 or 2 drives, shared with ET1-800-Q-02 600MHz ULV Celeron M CPU choice of FX8 or FX8C connectors per Hirose’s parallel requirements. ET1-800-Q-10 1.0GHz ULV Celeron M 373 • USB – 4 USB 2.0 ports (four root hubs) (Dothan) CPU • Keyboard/Mouse – PS/2 interface ET1-800-Q-22 1.4GHz LV Pentium M CPU • Audio – AC97 speaker, mic, headphone • Up to 1GB DDR Memory NETWORK INTERFACE • Four USB 2.0 Ports • Ethernet – Intel 82551ER (10/100 BaseT) Ethernet • 50% Thicker PCB VIDEO INTERFACE • Controller – Integrated Intel Extreme Graphics 2 • Ampro BIOS extensions – AGP 128-bit 3D engine – Supports resolutions to 2048x1536 • FX8 or FX8C connectors – Up to 64MB UMA Frame Buffer – Dual channel LVDS flat panel support For more information, pricing, and SOFTWARE & DEVELOPMENT TOOLS • OS Support – See Web site for current listings details on volume discounts, please • BIOS – General Software 5.3 with Ampro call us at 1. 800. 966. 5200 or extensions +1. 408. 360. 0200. We’ll immediately MECHANICAL connect you to your local distributor. • Size – 95x114mm (3.7x4.5"); ETX form factor • Power Requirements Don’t see the product you need? (w/128MB RAM, 100% Loaded) Contact us at 1. 800. 966. 5200 or – 1.4GHz 3.6A @ 5V +1. 408. 360. 0200 for information about – 1.0GHz 2.7A @ 5V – 600MHz 2.4A @ 5V our semi-custom and custom solutions. • Temperature (100 CFM system air flow) – Standard operating: −20° to +70°C – Optional operating: –40° to +85°C Get Started Today. Order a QuickStart Kit Now. – Storage: –55° to +85°C 5215 Hellyer Ave., Ste. 110, San Jose, CA 95138 Tel. 408.360.0200 Fax 408.360.0222 sales@ampro.com NOTICE: The product specifications provided in this data sheet are subject to change without notice. ©2005 Ampro Computers, Inc. All rights reserved. Ampro is a registered trademark and CoreModule, MiniModule, LittleBoard, Little www.ampro.com Board, EnCore, ReadyBoard, ReadyBox, ReadySystem and MightyBoard are trademarks of Ampro Computers, Inc. All other trademarks and registered trademarks are the property of their respective owners. DS-ETX800 5K 1205