LimitSwitches 802TLeverType•SpringReturn Plug-in StyleOiltightSwitches RangeofOperation Travel to Operate Contacts Max Travel Max Travel D D Travel to Travel to DD Reset Reset D D Switch SwitchWithout WithoutLever Lever andBase ProductSelection—Standard and Low Operating TorqueModels Cat. No. Travel to Number Reset Switch w/o of Torque/Force to Travel to Operate Max. Contacts, Switch w/o Lever and Circuits Lever Movement vs. Contact Operation Operate, Max. Contacts, Max. Travel Max. Lever Base 13° 802T-AP 802T-AP1 0.29 Nm (2.6 lbin) 7° Nominal 18° � 802T-A5P � 802T-A5P1 Clockwise or 1 2 1 2 1 2 Counterclockwise 3 4 3 4 3 4 5° Nominal 2.5° Nominal 802T-FP 802T-FP1 0.56 Nm (5 lbin) 9° 4° 802T-HP 802T-HP1 13° 802T-A1P 802T-A1P1 0.29 Nm (2.6 lbin) 7° 1 2 1 2 1 2 Clockwise 18° � 802T-A3P � 802T-A3P1 3 4 3 4 3 4 0.56 Nm (5 lbin) 9° 4° 802T-H1P 802T-H1P1 13° 802T-A2P 802T-A2P1 2 90° 0.29 Nm (2.6 lbin) 7° 1 2 1 2 1 2 Counterclockwise 18° � 802T-A4P � 802T-A4P1 3 4 3 4 3 4 0.56 Nm (5 lbin) 9° 4° 802T-H2P 802T-A2P1 Clockwise or 1 2 1 2 1 2 802T-ALP 802T-ALP1 Counterclockwise 3 4 3 4 3 4 1 2 1 2 1 2 Clockwise 0.16 Nm (1.5 lbin) 13° 7° ‡ 802T-AL1P ‡ 802T-AL1P1 3 4 3 4 3 4 1 2 1 2 1 2 Counterclockwise 802T-AL2P 802T-AL2P1 3 4 3 4 3 4 0.45 Nm (4 lbin) 13° 7° 802T-ATP 802T-ATP1 1 2 1 2 1 2 Clockwise or 3 4 3 4 3 4 56 56 56 Counterclockwise 0.79 Nm (7 lbin) 9° 4° 802T-HTP 802T-HTP1 78 78 78 0.45 Nm (4 lbin) 13° 7° 802T-A1TP 802T-A1TP1 1 2 1 2 1 2 3 4 3 4 3 4 4 Clockwise 90° 56 56 56 0.79 Nm (7 lbin) 9° 4° 802T-H1TP 802T-H1TP1 78 78 78 0.45 Nm (4 lbin) 13° 7° 802T-A2TP 802T-A2TP1 1 2 1 2 1 2 3 4 3 4 3 4 Counterclockwise 56 56 56 0.79 Nm (7 lbin) 9° 3.5° 802T-H2TP 802T-H2TP1 78 78 78 �Fluorinated elastomer shaft seal is supplied with these devices. ‡ Low operating torque model. ApproximateDimensions—Seepage5--43. Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--53. New Visitour website:www.ab.com/catalogs. 5--42 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TLeverType•SpringReturn Plug-in StyleOiltightSwitches ApproximateDimensions[mm(in.)] 14.68 1.19 43.71 (0.578) 18.92 (0.047) 8.74 (1.721) (0.745) 20.6 (0.344) 103.38 (0.811) (4.070) 34.93 19.05 (1.375) 23.37 (0.750) 75.79 (0.920) (2.984) 70.64 (2.781) 8.74 83.72 59.51 (0.344) (3.296) (2.343) 36.50 Clearance (1.437) Holes for 42.85 #10--32 29.36 (1.687) (1.156) 1/2 in. NPT 47.24 Conduit Opening 41.78 (1.860) (1.625) Plug-inSwitch 1/2--14 NPT ShippingWt.0.571kg(1.25 lb) 7.8 (0.31) 16.51 (0.650) 5.4 (0.213) Front Mounting Hole (2) #10--32 UNF--2B Rear Mounting Holes 5.4 (0.213) Front Mounting Hole Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--53. Visitour website:www.ab.com/catalogs. 5--43 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TLeverType•MaintainedContactandNeutralPosition Plug-in StyleOiltightSwitches RangeofOperation ApproximateDimensions[mm (in.)] Max Travel Travel to 45.21 Reset Contacts (1.78) 24.89 Plug-inSwitch (0.98) ShippingWt.0.57kg(1.25lbs) D D D 36.58 (1.44) Travel to 12.7 20.57 Operate Contacts (0.50) (0.81) 7.8 Operator Head (0.31) MaintainedContactModels Switch 7.87 WithoutLever (0.31) 59.44 Travel to (2.34) Operate Contacts SwitchWithout Max Travel Max Travel 78.99 Lever andBase DD (3.11) Travel to Travel to D D Reset Reset Conduit 2--#10--32 D D UNF--2B 14.73 18.29 2--5.4 (0.213) 3.30 (0.58) (0.72) Holes for (0.13) 29.46 46.24 Front Mtg. Deep for (1.16) (1.84) Rear Mtg. 1/2 in. NPT 41.40 Conduit Opening NeutralPositionModels (1.63) ProductSelection—Maintained ContactModels Cat. No. Torque to Travel to Travel to Switch Switch No. of Operate Operate Max Reset w/o Lever w/o Lever & Base Circuits Lever Movement vs. Contact Operation (Max.) Contacts (Max.) Travel Contacts (Max.) Clockwise or 0.31 NSm 2 802T--AMP 802T--AMP1 1 2 1 2 Counterclockwise (2.75 lbSin) 3 4 3 4 70°™ 88°™ 32° 1 2 1 2 Clockwise or 0.32 NSm 802T--AMTP 802T--AMTP1 4 3 4 3 4 Counterclockwise (2.8 lbSin) 5 6 5 6 7 8 7 8 ™ From one maintained position to another. ProductSelection—Neutral Position Models Torque to Operate (Max.) Cat. No. Travel to Travel to Counter- Switch Switch Operate Max Reset Clockwise clockwise w/o Lever w/o Lever & Base Contacts (Max.) Travel Contacts (Max.) Lever Movement vs. Contact Operation 1 2 1 2 1 2 0.28 NSm 0.47 NSm 3 4 3 4 3 4 13° 75° 7° 802T--NPTP 802T--NPTP1 (2.5 lbSin) (4.2 lbSin) 56 56 56 78 78 78 Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--53. Visitour website:www.ab.com/catalogs. 5--44 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TPushType•SpringReturn Plug-in StyleOiltightSwitches RangeofOperation Travel to Operate Contacts Travel to Reset Contacts D D D Max. Travel Top AdjustableTop Side Top SidePush PushRod PushRod PushRod PushRoller HorizontalRoller ProductSelection Contact Operation Cat. No. Torque/Force Travel to Switch w/o Number of to Operate, Operate Maximum Travel to Reset Switch Lever and Circuits Normal Operated Operator Type Max. Contacts, Max. Travel Contacts, Max. w/o Lever Base Top Push Rod 802T-BP 802T-BP1 1.4 mm 6.0 mm 0.9 mm 13.8 N (3.1 lb) Adjustable Top (0.057 in.) (0.236 in.) (0.034 in.) 802T-BAP 802T-BAP1 Push Rod 3.3 mm 5.7 mm 1.9 mm Side Push Rod 16.4 N (3.7 lb) 802T-CP 802T-CP1 (0.131 in.) (0.226 in.) (0.074 in.) 1 2 1 2 1.4 mm 6.0 mm 0.9 mm 2 Top Push Roller 13.8 N (3.1 lb) 802T-DP 802T-DP1 3 4 3 4 (0.057 in.) (0.236 in.) (0.034 in.) Side Push 802T-KP 802T-KP1 Vertical Roller 3.3 mm 5.7 mm 1.9 mm 16.4 N (3.7 lb) Side Push (0.131 in.) (0.226 in.) (0.074 in.) Horizontal 802T-K1P 802T-K1P1 Roller Top Push Rod 802T-BTP 802T-BTP1 1.4 mm 6.0 mm 0.9 mm 22.2 N (5.0 lb) Adjustable Top (0.057 in.) (0.236 in.) (0.034 in.) 802T-BATP 802T-BATP1 Push Rod 3.3 mm 5.7 mm 1.9 mm Side Push Rod 24.9 N (5.6 lb) 802T-CTP 802T-CTP1 1 2 (0.131 in.) (0.226 in.) (0.074 in.) 1 2 3 4 3 4 1.4 mm 6.0 mm 0.9 mm 4 Top Push Roller 22.2 N (5.0 lb) 802T-DTP 802T-DTP1 56 56 (0.057 in.) (0.236 in.) (0.034 in.) 78 78 Side Push 802T-KTP 802T-KTP1 Vertical Roller 3.3 mm 5.7 mm 1.9 mm 24.9 N (5.6 lb) Side Push (0.131 in.) (0.226 in.) (0.074 in.) Horizontal 802T-K1TP 802T-K1TP1 Roller Modificationsand Accessories—Seepage5--53. Visitour website:www.ab.com/catalogs. New 5--45 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TPushType•SpringReturn Plug-in StyleOiltightSwitches ApproximateDimensions[mm(in.)] 8.74 R4.37 (0.344) (0.172) 5.4 (0.213) Front 75.79 Mounting Hole (2.984) 45.72 59.51 83.72 (2) #10--32 70.64 (1.800) (2.343) (3.296) UNF--2B (2.781) Rear Mounting Holes 8.74 36.50 1.17 29.36 (0.344) (1.437) (0.046) R (1.156) 42.85 5.4 (0.213) 36.07 1/2 in. NPT Front (1.687) (1.420) Conduit Opening Mounting Hole 41.28 (1.625) SwitchBody 7.87 9.65 (0.31) Dia (0.38) 7/16 in. Hex 67.56 75.44 (2.66) Max 43.18 (2.97) Max 51.31 (1.70) 61.21 (2.02) 69.09 (2.41) Min (2.72) Min 40146--013--59 40146--013--65 TopPushRodHead AdjustableTopPushRodHead ShippingWt.0.142kg(5oz) ShippingWt.0.142kg(5oz) 12.7 50.8 40.39 (0.5) (2) (1.59) 12.7 (0.5) 36.58 51.56 59.44 36.58 (1.44) (2.03) (2.34) (1.44) 20.57 20.57 (0.81) (0.81) 12.7 12.7 (0.5) (0.5) 40146--017--63 40146--013--60 40146--017--64 SidePushRodHead TopPushRoller Head SidePushRoller Head ShippingWt.0.142kg(5oz) ShippingWt.0.142kg(5oz) ShippingWt.0.142kg(5oz) Modificationsand Accessories—Seepage5--53. Visitour website:www.ab.com/catalogs. 5--46 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TWobbleStickandCatWhisker•SpringReturn Plug-in StyleOiltightSwitches RangeofOperation™ Travel to Operate Contacts D Max Travel D D Travel to Reset Contacts WobbleStick WobbleStick WireCat NylonExtension WireExtension Whisker ProductSelection Cat. No. Torque to Travel to Travel to Complete Switch Max Operate Operate Contacts Reset Contacts Travel™š Switch Without Base Operator Type Contact Operation (Max.)š (Max.)š (Max.)š Nylon Wobble Stick 802T--WSP 802T--WSP1 0.51 NSm 9° 10° 5° 1 2 1 2 (4.5 lbSin) 802T--WS1P 802T--WS1P1 Wire Wobble Stick 3 4 3 4 0.06 NSm Wire Cat Whisker 21° 28° 14° 802T--CWP 802T--CWP1 (8 ozSin) ™ These switches should be mounted in such a way that the wobble stick or cat whisker will not be deflected beyond the “Maximum Travel” position, as this could cause undesirable repetition of contact action on rebound. š Operating travels and torque are measured at rigid section of stick or cat whisker. ApproximateDimensions[mm(in.)] 4.37 8.74 (0.172) R (0.344) 75.79 5.4 (0.213) (2.984) Front 45.72 59.51 83.72 70.64 Mounting Hole (1.800) (2.343) (3.296) (2.781) (2) #10--32 UNF--2B Rear Mounting Holes 8.74 36.50 29.36 (0.344) (1.437) (1.156) 42.85 36.07 1/2 in. NPT (1.687) (1.420) Conduit Opening 5.4 (0.213) 41.28 Front (1.625) SwitchBody Mounting Hole 6.35 1.83 (0.072) (0.25) 1.98 (0.078) Dia. O.D. Nylon Tubing Dia. 148.34 138.18 322.33 330.2 146.05 (5.84) (5.44) 140.46 (13) (12.69) (5.75) (5.44) 40146--126--53 40146--113--53 40146--113--59 CatWhisker Head NylonWobbleStick Head WireWobbleStick Head ShippingWt.0.09kg(3oz) ShippingWt.0.2kg(7oz) ShippingWt.0.17kg(6oz) Modificationsand Accessories—Seepage5--53. Visitour website:www.ab.com/catalogs. 5--47 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TLowEnergy Plug-in StyleOiltightSwitches Specifications Certifications ULListed,CSACertifiedandCEMarkedforall applicabledirectives Environmental EnclosureTypeRating NEMA4,13,and6Pš AmbientTemperature[C(F)]™ --18…+110°(0…+230°) --40…110°(--40…230°)lowtemp.model InputVoltage 5…28VDC DCContactRating 0.40VAloadperpolemax 0.025VAloadperpolemin In today’s age oflow energy controls, Description Plug-in Style electromechanicalswitches are more LeverType• Spring Return page 5--49 Intended fordirectconnection to PLCs frequently interfacing directly with low Push Type• Spring Return . page 5--51 and otherlow energy circuits,the energy circuits.Switching low energy components and design ofthese low loads presents a unique challenge. energy limitswitches are optimized for RockwellAutomation is perfectly long life. situated to assistyou with allyourlow energy switching needs. The primary concern oflow energy switching is contactcontamination. Since low energy loads do notarc or Features burn the contacts clean,contaminants S Welded gold and silveralloy contacts may cause erratic switch behavior. provide a barrieragainstsurface RockwellAutomation’s low energy limit oxides switches are designed with welded gold and silveralloy contacts to provide a S Stationary waffle shape contact protective barrieragainstsurface reduces the impactofcontamination oxides.A stationary waffle shape build-up contactoptimizes contactpressure to stabilize the contactresistance in the S Prism shaped crossbarcontact region ofthe micro load.A prism provides high pressure to penetrate shaped crossbarcontactprovides high foreign particles which could prevent pressure to penetrate foreign particles contactclosure which could preventcontactclosure. S Snap-acting spannerreplicates same These low energy limitswitches are reliability performance ofourlegacy suitable formachine connectivity and NEMA products low voltage facilities.They have a low inputvoltage of5…28V DC with contact S Levertype and push type operating ratings of0.025V A min.and 0.40V A styles max.perpole. S Plug-in style forease ofwiring and Bulletin 802T low energy limitswitches conduitand mini-receptacle wiring are idealforapplications in which heavy options duty pilotratings,a high degree of versatility and a rugged NEMA Type 4, S Enclosure rating NEMA 4,13 and š 13 and 6P rating are required.Similarto 6P ourfullline ofstandard 802T plug--in S UL Listed,CSA Certified and CE style limitswitches,ourlow energy limit Marked forapplicable directives switches existin levertype spring return and push type spring return.Operating S 5…28V DC and 0.025V A min.and heads can be mounted in fourpositions, 0.40V A max.load perpole 90° apart. ™ Temperature range below 0°C(+32°F) is based on the absence of freezing moisture or water. š 6Ponly applies to lever type, except low torque. Visitour website:www.ab.com/catalogs. 5--48 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TLowEnergyLeverType•SpringReturn Plug-in StyleOiltightSwitches RangeofOperation Travelto OperateContacts MaxTravel MaxTravel D D Travelto D D Travelto Reset Reset D D Switch without Lever ProductSelection—Standard and Low Operating TorqueModels Contact Operation for Max. Torque Max. Travel Cat. No. No. of Clockwise or to Operate to Operate Maximum Travel Max. Travel to Reset Switch w/o Lever Circuits Counterclockwise Movement [N•m(lb•in.)] (degrees) (degrees) (degrees) Switch Type 1 2 1 2 1 2 2 0.29(2.6) 13 90 7 Conduit 802T--AGP 3 4 3 4 3 4 All lowenergy limitswitches aredesignedtooperateinanambienttemperatureof --18…110°C(0…230°F).This 802T--AGPElimit Conduit/Low 802T--AGPE switchis modifiedforlowtemperatureoperationat --40…110°C(--40…230°F).All otherspecifications areidentical tothe802T--AGP. Temp. 2 4 Identical to802T--AGPbutwithpre-wiredfive-pinmini connector. Mini Connector 802T--AGPJ1™ 1 Same Polar- ity 1 5 0.106(1.3) Conduit/Low 1 2 1 2 1 2 2 13 90 7 802T--ALGP max. Torque 3 4 3 4 3 4 ™ Recommended standard cordset is 889N--F5AFC--6F—straight female 5-pin minito flying leads, 1.8 m (6 ft) long. For additionalcable lengths or styles, see page 8--4. Levers—Seepage5--130foracompletelisting ofoperating levers. Visitour website:www.ab.com/catalogs. 5--49 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TLowEnergyLeverType•SpringReturn Plug-in StyleOiltightSwitches ApproximateDimensions[mm(in.)] 14.68 1.19 (0.578) 43.71 18.92 (0.047) 8.74 (1.721) (0.745) 20.6 103.38 (0.344) (0.811) (4.070) 19.05 34.93 (0.750) (1.375) 23.37 75.79 (0.920) (2.984) 70.64 (2.781) 8.74 83.72 59.51 (0.344) (3.296 (2.343) 36.50 Clearance (1.437) Holesfor 42.85 #10--32 29.36 (1.687) 1/2--14 (1.156) NPT 47.24 Conduit 41.78 (1.860) Opening (1.625) Plug--In Switch 1/2--14NPT Shipping Wt. 0.571 kg (1.25 lb) 7.8(0.31) 16.51 (0.650) 5.4(0.213) Front MountingHole (2)#10--32 UNF--2B RearMounting Holes 5.4(0.213) Front MountingHole Visitour website:www.ab.com/catalogs. 5--50 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TLowEnergyPushType•SpringReturn Plug-in StyleOiltightSwitches RangeofOperation Travelto OperateContacts Travelto ResetContacts D D D MaxTravel Side Push Rod Top Push Roller Side Push Vertical Roller ProductSelection Contact Operation No. of Operator Force to Operate Travel to Operate Maximum Travel Travel to Reset Normal Operated Circuits Type [NSm(lb] [mm (in.)] [mm (in.)] [mm (in.)] Cat. No. SidePushRod 16.4(3.68)max. 3.3(0.131)max. 5.7(0.226) 1.3(0.052)max. 802T--CGP TopPush 1 2 1 2 13.8(3.1)max. 1.4(0.057)max. 6.0(0.236) 0.7(0.028) 802T--DGP 2 Roller 3 4 3 4 SidePush 16.4(3.68)max. 3.3(0.131)max. 5.7(0.226) 1.3(0.052)max. 802T--KGP Vertical Roller Visitour website:www.ab.com/catalogs. 5--51 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TLowEnergyPushType•SpringReturn Plug-in StyleOiltightSwitches ApproximateDimensions[mm(in.)] R4.37 (0.172) 5.4(0.213) Front 70.64 MountingHole 45.72 (2.781) 59.51 (1.800) (2)#10--32 (2.343) UNF--2B RearMounting Holes 8.74 36.50 29.36 1.17 (0.046)R (0.344) (1.437) (1.156) 1/2in.NPT 5.4(0.213) 36.07 Conduit Front (1.420) Opening MountingHole Switch Body 12.7 50.8 40.39 (0.5) (2) (1.59) 12.7 (0.5) 36.58 51.56 59.44 36.58 (1.44) (2.03) (2.34) (1.44) 20.57 20.57 (0.81) (0.81) 12.7 12.7 (0.5) (0.5) 40146--017--63 40146--013--60 40146--017--64 Side Push Rod Head Top Push Roller Head Side Push Roller Head Shipping Wt. 0.142kg (5oz) Shipping Wt. 0.142kg (5oz) Shipping Wt. 0.142kg (5oz) Visitour website:www.ab.com/catalogs. 5--52 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TModificationsandAccessories Plug-in StyleOiltightSwitches To orderlevertype limitswitches with 5-PinMini-TypeReceptacle the fluorinated elastomershaftseal “J1” Wiring only,addV1 to the end ofthe listed cat. no. 2 4 BaseAssembly The limitswitch base,including the Same terminalblock,is available as a Polarity separate unitperthe following table. 1 Cat.No. 5 2--CircuitBase ........... 802T--X7 Manifold Indicating 2--CircuitBase with Mount Light Indicating Light ......... 802T--X7N 2--CircuitManifold Manifold Mount MountBase............ 802T--X7U Alltwo-circuitplug-in limitswitches can 4--CircuitBase ........... 802T--X8 be supplied with a specialterminalbase Low TemperatureOperation which permits mounting the switch “J9” Wiring manifold style on a machine base, Plug-in limitswitches are designed to panelorraceway.As shown above,this 5 1 operate in an ambienttemperature base is supplied with a wiring hole and range of --18…+110°C(0…+230°F), gasketon the back. --18…+54°C(0…+130°F)forwobble To ordera manifold mountswitch,add stick and catwhisker.Speciallimit Same switches modified forlow temperature the letterU to the listed cat.no.. Polarity operation at --40…+110°C Example:Cat.No.802T--AP becomes (--40…+230°F)are available. Cat.No.802T--APU. 4 2 Temperature ranges below 0°C(+32°F) Indicating Light are based on absence offreezing moisture orwater.To order,add the Bulletin 802T two-circuitplug-in limit letterE to cat.no.Notavailable on switches (exceptforthe catwhisker, wobble stick,catwhiskerorpre-wired wobble stick,and manifold mount cable switches;standard on low torque devices)can be supplied with an and maintained devices. indicating light.To orderadd the letterN for120V AC,50/60 Hz orN5 for240V Pre-Wired Cable AC 50/60 Hz.Example:Cat.No. An appropriate female connectorwith To orderfactory installed pre-wired type 802T--AP becomes Cat.No. cable (889N--F5AFC--6F)is available “STOOW-A” cable for2-circuit 802T--APN. on page 8--4 in Connection Systems. (5-conductor)and 4-circuit The indicating lightis internally (9-conductor)switches,add the suffixY connected to two isolated terminals in 9-PinMini-TypeReceptacle plus the numberoffeetrequired. the base assembly allowing the userto Example:To orderan 802T-AP with “J1” Wiring (“J9” wiring not wire the lightto eitherthe N.O.orthe 2.4 m (5 ft)ofcable the cat.no.would available for 4 circuit) N.C.contact.Switches with an become 802T--APY5. 3 4 indicating lighthave a contactrating of The standard cable length is 2.4 m NEMA A300. Same (5 ft).Extended cable lengths are Where an indicatorlightand a pre-wired Polarity available in multiples of1.22 m (4 ft) 2 5-pin miniconnectorare used,the light 1 only. is pre-wired to the N.C.contactwith J1 wiring and to the N.O.contactwith J9 Mini-TypeReceptacles wiring.Indicating lights are notavailable To ordera bulletin 802T pre-wired limit 8 6 on 4-circuit802T switches. switch with a five-pin (2 circuit)ornine pin (4 circuit)miniconnector,add the Fluorinated ElastomerSeals Same Polarity suffixJ1 orJ9 depending on desired To orderlimitswitches with all 5 wiring (J9 wiring notavailable for 9 fluorinated elastomerseals,add the 4-circuitmodels). letterV to the end ofthe listed cat.no. Notavailable on manifold mount,low operating torque,low temperature or limitswitches with an indicating light. An appropriate female connectorwith cable (889N--F9AF--2)is available on page 8--14 in Connection Systems. Visitour website:www.ab.com/catalogs. 5--53 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802T NonPlug-in StyleOiltightSwitches Specifications Enclosure Rating NEMA 13, IP54 Pollution Degree 3 Certifications UL Listed, CSA Certified and CE Marked for applicable directives Ambient Temperature [C (F)]™ Nonplug-in limit switches are designed to operate in an ambient temperature range of --18…+54° (0…+130°). AC Contact Rating (Maximum per Pole, 50 or 60 Hz, Same Polarity) AVA NEMA Continuous Rating Carrying Designation Max Voltage Make Break Current Make Break 120 60 6.00 10 7200 720 240 30 3.00 10 7200 720 A600 480 15 1.50 10 7200 720 AC--15 Description 600 12 1.20 10 7200 720 Bulletin 802T limitswitches are idealfor applications in which heavy duty pilot DC Contact Rating (Maximum per Pole, Same Polarity) ratings,smallsize,a high degree of Voltage Range Current Rating versatility and a rugged NEMA Type 13 115--125 0.4 A oiltightconstruction are desirable.An importantfactorin the automation of 230--250 0.2 A industry,these limitswitches are being 550--600 0.1 A applied extensively on conveyor ™ Temperature range below 0_C(+32_F) is based on the absence of freezing moisture or water. systems,transfermachines,automatic See page 5--73 for Extended Temperature Option. turretlathes,milling and boring machines,radialdrills,and many other NonPlug-in Style types ofmodern,high speed production equipment. 2-Circuit 4-CircuitHorizontalConstruction A wide variety ofoperating heads and LeverType• Spring Return page 5--55 LeverType• Spring Return page 5--66 operating levers are available. Standard and Low Operating Torque LeverType• Maintained ... page 5--67 Operating heads can be mounted in Models Contact fourpositions,90° apart. LeverType with DeviceNet page 10--15 Push Type• Spring ....... page 5--68 Output• Spring Return Features Return & Maintained Contact LeverType• Maintained ... page 5--56 S Side rotary,wobble stick,catwhisker, Wobble Stick & Cat ....... page 5--70 Contactand NeutralPosition Whisker• Spring Return adjustable top and top orside push LeverType with Time ..... page 5--57 styles,with orwithoutrollers DualSwitch Leverand .... page 5--71 Delay• Spring Return (1-Circuit) Push Types• Spring Return S Rugged construction Push Type• Spring Return . page 5--59 Air-Operated• Spring Returnpage 5--72 and Maintained Contact S Proven reliability Modifications and ......... page 5--73 Wobble Stick and Cat ..... page 5--61 Accessories Whisker• Spring Return Operating Levers 4-CircuitVerticalConstruction LeverType• Spring ....... page 5--62 LeverSelection ......... page 5--130 Return & Maintained Contact Push Type• Spring ....... page 5--63 Return & Maintained Contact Wobble Stick and Cat ..... page 5--65 Whisker• Spring Return Visitour website:www.ab.com/catalogs. 5--54 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802T2-CircuitLeverType•SpringReturn NonPlug-in StyleOiltightSwitches zl RangeofOperation ApproximateDimensions[mm(in.)] Travel to Travel to 55.63 Operate Contacts Operate Contacts (2.22) NonPlug-inSwitch Max Travel D Max Travel ShippingWt.0.45kg(1lb) 16.76 (0.66) D D 6.34 (0.25) 12.7 Travel to Travel to (0.5) Reset Contacts Reset Contacts 72.14 (2.84) Operating Lever Operationwith Head 59.44 StandardLevers (2.34) Conduit 2--5.4 (0.213) Dia. 14.73 21.34 802T--A Holes for (0.58) (0.84) Front Mounting 29.46 0.5 in. Dia. (1.16) 802T--ALW5 NPT 38.86 45.21 (1.53) (1.78) ProductSelection—Standard and Low Operating TorqueModels Torque to Travel to Operate Max Travel to Reset Operate (Max.) Contacts (Max.) Travel Contacts (Max.) Lever Movement vs. Contact Operation Cat. No. 0.34 NSm 16.5° 43° 8° 802T--A (3 lbSin) Clockwise or 1 2 1 2 1 2 Counterclockwise 0.51 NSm 3 4 3 4 3 4 6° 50° 3° 802T--H (4.5 lbSin) 0.40 NSm 16.5° 43° 8° 802T--A1 (3.5 lbSin) 1 2 1 2 1 2 Clockwise 0.51 NSm 3 4 3 4 3 4 6.5° 50° 3° 802T--H1 (4.5 lbSin) 0.40 NSm 802T--A2 16.5° 43° 8° (3.5 lbSin) 1 2 1 2 1 2 Counterclockwise 0.51 NSm 3 4 3 4 3 4 802T--H2 6.5° 50° 3° (4.5 lbSin) Clockwise 1 2 1 2 802T--L1 Lever cannot 3 4 3 4 move counterclockwise 0.45 NSm 20° 91° 11° (4 lbSin) Counterclockwise 1 2 1 2 802T--L2 Lever cannot 3 4 3 4 move clockwise Clockwise or 1 2 1 2 1 2 802T--ALW5™ Counterclockwise 3 4 3 4 3 4 0.09 NSm 1 2 1 2 1 2 22° 43° 12° 802T--AL1W5™ Clockwise (12.5 ozSin) 3 4 3 4 3 4 1 2 1 2 1 2 Counterclockwise 802T--AL2W5™ 3 4 3 4 3 4 ™These low operating torque limit switches can only be supplied with cat. no. 802T-W5 rod lever. The rod can easily be formed to meet special application requirements. Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--55 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802T2-CircuitLeverType•MaintainedContactandNeutralPosition NonPlug-in StyleOiltightSwitches RangeofOperation Travel to Travel to Travel to Max Travel Reset Contacts Operate Contacts Operate Contacts D Max Travel Max Travel D D D D D Travel to Travel to Travel to Reset Contacts Reset Contacts Operate Contacts 802T--AM 802T--NP MaintainedContactModels NeutralPositionModels ProductSelection Contact Lever Movement vs. Torque to Travel to Operate Travel to Reset Type Contact Operation Operate (Max.) Contacts (Max.) Max Travel Contacts (Max.) Cat. No. Maintained 70°™ 84°™ 50° 802T--AM 1 2 1 2 0.25 NSm 3 4 3 4 (2.25 lbSin) Neutral 1 2 1 2 1 2 12° 53° 6° 802T--NP Position 3 4 3 4 3 4 ™ From one maintained position to the other. ApproximateDimensions[mm (in.)] 62.48 (2.46) 16.76 59.52 (2.36) (0.66) 16.61 (0.65) 6.35 30.09 (0.25) (1.18) 12.7 72.14 12.7 (0.5) 6.55 (2.84) (0.5) Operating (0.26) Head Operating 59.44 Head (2.34) 72.72 (2.86) Conduit 2--5.4 (0.213) Dia. 14.73 14.27 21.34 Holes for (0.58) (0.26) 43.55 (0.84) 6.55 39.37 Front Mounting 29.46 (1.71) (0.26) 0.5 in. Dia. (1.16) (1.55) NPT 38.86 45.21 (1.53) (1.78) NonPlug-inSwitch NonPlug-inSwitch ShippingWt.0.45kg(1lb) ShippingWt.0.45kg(1 lb) 802T--AM 802T--NP Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--56 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802T1-CircuitLeverTypewithTimeDelay•SpringReturn NonPlug-in StyleOiltightSwitches 802T--R1TD with802T--W1Lever ProductSelection Torque Travel to Cat. No. to Operate Max Operate Contact On-Delayšœ Off-Delayšž Lever Movement vs. Contact Operation› (Max.) (Max.) Overtravel Travel 802T--R1TD 802T--R7TD Clockwise 1 2 1 2 Lever cannot move counterclockwise 802T--R3TD 802T--R5TD 0.23 1 2 1 2 Approx. NSm 45°™ 45°™ 90° (2 lbSin) 802T--R2TD 802T--R8TD Counterclockwise 1 2 1 2 Lever cannot move clockwise 802T--R4TD 802T--R6TD 1 2 1 2 ™ Required for Timing Accuracy. š The time delay is adjustable from 0.5…15 seconds± 25%. › Contacts are rated for 3 A, 120V AC maximum. œ The lever travel must be faster than the timing setting.  Time delay occurs after lever is moved to operated position ž Time delay occurs after lever is moved from operated to normal position Visitour website:www.ab.com/catalogs. 5--57 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802T NonPlug-in StyleOiltightSwitches ApproximateDimensions[mm (in.)] 66.8 (2.63) 45.21 26.92 (1.78) (1.06) 19 (0.75) Dia. 38.1 6.35 (1.5) (0.25) 12.7 (0.5) 95.25 (3.75) TimeDelay Switchwith802T--W1Lever ShippingWt.0.90kg(2lbs) 107.95 (4.25) Conduit 28.7 41.4 6.35 0.5″ Dia. (1.13) (1.63) (0.25) NPT 64.26 54.1 (4) 5.5 (0.218) Dia. (2.53) (2.13) Mounting Holes Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--58 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802T2-CircuitPushType•SpringReturnandMaintainedContact NonPlug-in StyleOiltightSwitches TopPushRod Adjustable SidePushRod TopPush SidePush SidePushRod TopPushRod Roller Roller Maintained RangeofOperation SpringReturn Maintained Travel to Operate Contacts Max Travel Travel to Reset Contacts D D Normal Operated D Travel to Travel to Max Travel Operate Contacts Operate Contacts ProductSelection Contact Operation Travel to Force to Operate Travel to Reset Normal Operated Operator Type Operate (Max.) Contacts (Max.) Max Travel Contacts (Max.) Cat. No. 802T--B TopPushRod 1 2 1 2 15.6 N 1.9 mm 5.1 mm 0.8 mm Adjustable Top Push Rod 802T--BA (3.5 lb) (0.075 in.) (0.202 in.) (0.030 in.) 3 4 3 4 802T--D TopPushRoller Side Push Rod 802T--C 20.0 N 3.2 mm 5.5 mm 1.5 mm Side Push Vertical Roller 802T--K (4.5 lb) (0.125 in.) (0.218 in.) (0.057 in.) 1 2 1 2 802T--K1 Side Push Horizontal Roller 3 4 3 4 4.87 mm 5.30 mm Maintained Contact 35.6 N 5.96 mm 802T--CM (0.192 in.) (0.209 in.) Side Push Rod (8 lbs) (0.235 in.) Nominal Nominal Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--59 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802T2-CircuitPushType•SpringReturnandMaintainedContact NonPlug-in StyleOiltightSwitches ApproximateDimensions[mm(in.)] 72.14 Operating (2.84) Head 59.44 (2.34) Conduit 2--5.4 (0.213), 14.73 21.34 (0.58) Dia. Holes for (0.84) 0.5″ Dia. Front Mtg. 29.46 NPT (1.16) 38.86 45.21 (1.53) (1.78) NonPlug-inSwitch ShippingWt.0.45kg(1lb) 4.06 (0.16) 12.7 9.65 (0.5) (0.38) 67.56 (2.66) (Max. 43.69 51.56 ) 61.21 (2.03) (1.72) (2.41) (Min.) 802T--B TopPushRodHead 802T--D TopPushRoller Head 802T--BA Adjustable ShippingWt.0.128kg(4.5oz) TopPushRodHead ShippingWt.0.128kg(4.5oz) ShippingWt.0.128kg(4.5oz) 33.27 48.51 33.27 46.74 2.87 36.83 30.23 (1.31) (1.91) (1.31) (1.84) (1.13) (1.45) (1.19) 11.18 (0.44) 12.7 7.87 7.87 (0.5) (0.31) 12.7 12.7 12.7 (0.31) (0.5) (0.5) (0.5) 802T--C SidePushRodHead 802T--K SidePushRoller Head 802T--CMMaintainedSidePushRodHead ShippingWt.0.128kg(4.5oz) ShippingWt.0.128kg(4.5oz) ShippingWt.4.5oz (0.128kg) Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--60 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802T2-CircuitWobbleStickandCatWhisker•SpringReturn NonPlug-in StyleOiltightSwitches RangeofOperation Travel to Operate Contacts D Max Travel D D Travel to Reset Contacts WobbleStick WobbleStick CatWhisker NylonExtension WireExtension ProductSelection Travel to Travel to Torque to Operate Reset Operator Type Contact Operation Operate (Max.)™ Contacts (Max.)™ Max Travel™ Contacts (Max.)™ Cat. No. Nylon Wobble Stick 802T--WS 0.51 NSm 9° 10° 4° (4.5 lbSin) Wire Wobble Stick 802T--WS1 1 2 1 2 3 4 3 4 0.06 NSm Wire Cat Whisker 21° 22° 14° 802T--CW (8 ozSin) ™ Operating travels and torque are measured at rigid section of stick or cat whisker. ApproximateDimensions[mm (in.)] 1.98 6.35 1.82 (0.072) (0.078) Dia 72.14 (0.25) Operating O.D. (2.84) Head Nylon Tubing 59.44 (2.34) 319.02 127 135.64 (5) (12.56) (5.34) Conduit 14.73 2--5.4 (0.213), 21.34 (0.58) Dia. Holes for (0.84) Front Mounting 29.46 0.5 in. Dia. (1.16) NPT 38.86 45.21 5.59 (1.53) (1.78) (0.22) Z--18210Nylon Z--18211Wire Z--25142 NonPlug-inSwitch WobbleStick Head WobbleStick Head CatWhisker Head ShippingWt. ShippingWt. ShippingWt. ShippingWt. 0.45kg(1lb) 0.128kg(4.5oz) 0.149kg(5.25oz) 0.028kg(1oz) Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--61 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TVertical4-CircuitPushType•SpringReturn&MaintainedContact NonPlug-in StyleOiltightSwitches RangeofOperation ApproximateDimensions[mm(in.)] 57.91 (2.28) 18.29 45.21 Travel to Travel to (0.72) 19 (1.78) Operate Contacts Operate Contacts (0.75) Dia. D Max Travel Max Travel 38.1 (1.5) D D 7.87 (0.31) 12.7 (0.5) Travel to Travel to Reset Contacts Operating Reset Contacts Head Switch 122.17 (4.81) WithoutLever 103.12 (4.06) Conduit 19 17.53 19 34.93 (0.75) (0.69) (0.75) 46.74 (1.375) 45.97 Dia. NPT (1.84) (1.81) 4CircuitNonPlug-inSwitchwith802T--W1Lever ShippingWt.0.57kg(1.25lb) ProductSelection Torque to Travel to Operate Travel to Reset Lever Movement vs. Contact Operation Operate (Max.) Contacts (Max.) Max Travel Contacts (Max.) Cat. No. 0.34 NSm 18° 42° 14° 802T--AT 1 2 1 2 1 2 (3 lbSin) Clockwise or 3 4 3 4 3 4 Counterclockwise 0.68 NSm 56 56 56 9° 50° 6° 802T--HT (6 lbSin) 78 78 78 0.40 NSm 18° 42° 14° 802T--A1T 1 2 1 2 1 2 (3.5 lbSin) 3 4 3 4 3 4 Clockwise 0.68 NSm 56 56 56 9° 50° 6° 802T--H1T (6 lbSin) 78 78 78 0.40 NSm 18° 42° 14° 802T--A2T 1 2 1 2 1 2 (3.5 lbSin) 3 4 3 4 3 4 Counterclockwise 0.68 NSm 56 56 56 9° 50° 6° 802T--H2T (6 lbSin) 78 78 78 1 2 1 2 Clockwise 3 4 3 4 Lever cannot move 802T--L1T counterclockwise 56 56 0.45 NSm 78 78 28° 91° 18° (4 lbSin) 1 2 1 2 Counterclockwise 3 4 3 4 Lever cannot move 802T--L2T clockwise 56 56 78 78 84° 1 2 Maintained Contact 1 2 0.34 NSm From one Clockwise or 75° 50° 802T--AMT 3 4 3 4 (3 lbSin) maintained position Counterclockwise to the other 5 6 5 6 7 8 7 8 Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--62 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TVertical4-CircuitPushType•SpringReturn&MaintainedContact NonPlug-in StyleOiltightSwitches TopRod AdjustableTop SideRod TopRoller SideRoller SideRod PushRod RangeofOperation SpringReturn Maintained Travel to Operate Contacts Max Travel Travel to Reset Contacts D D Normal Operated D Travel to Travel to Operate Contacts Max Travel Operate Contacts ProductSelection Contact Operation Force to Travel to Operate Max Travel to Reset Catalog Normal Operated Operator Type Operate (Max.) Contacts (Max.) Travel Contacts (Max.) Number™ 802T--BT TopPushRod 24.4 N 1.6 mm 1 2 1 2 (5.5 lb) (0.062 in.) Adjustable Top Push Rod 802T--BAT 3 4 3 4 56 56 28.9 N 2.4 mm Side Push Rod 802T--CT 78 78 (6.5 lb) (0.094 in.) 3.6 mm 6.0 mm (0.140 in.) (0.234 in.) 24.4 N 1.6 mm TopPushRoller 802T--DT (5.5 lb) (0.062 in.) 1 2 1 2 Side Push Vertical Roller 802T--KT 3 4 28.9 N 2.4 mm 3 4 (6.5 lb) (0.094 in.) 56 802T--K1T Side Push Horizontal Roller 56 78 78 Maintained Contact 62.2 N 3.93 mm 5.96 mm 5.30 mm 802T--CMT Side Push Rod (14 lb) (0.155 in.) Nominal (0.235 in.) (0.180 in.) Nominal ™ These devices are not available with fluorinated elastomer seals or neon indicating lights. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--63 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TVertical4-CircuitPushType•SpringReturn&MaintainedContact NonPlug-in StyleOiltightSwitches ApproximateDimensions[mm (in.)] 122.17 Operating (4.81) Head 103.12 (2.34) 17.53 19 (0.69) 34.93 0.75 Dia. (0.75) (1.375) NPT 45.97 46.74 (1.81) (1.84) NonPlug-inSwitch ShippingWt.0.57kg(1.25lb) 4.06 (0.16) 9.65 (0.38) 36.83 33.27 (1.45) 67.56 (1.31) (2.66) Max 43.69 (1.72) 61.21 (2.41) Min 7.87 (0.31) 12.7 (0.5) 802T--BT AdjustableTopPushRodHead 802T--CT TopPushRodHead for 802T--BAT SidePushRodHead ShippingWt.0.128kg(4.5oz) ShippingWt.0.128kg(4.5oz)™ ShippingWt.0.128kg(4.5oz) 12.7 (0.5) 33.27 2.87 48.51 46.74 30.23 (1.31) (1.13) (1.91) (1.84) (1.19) 51.56 (2.03) 12.7 (0.5) 12.7 7.87 11.18 (0.5) (0.31) 12.7 (0.44) (0.5) 802T--DT 802T--KT 802T--CMT TopPushRoller Head 802T--K1T MaintainedSidePushRodHead ShippingWt.0.128kg(4.5oz) SidePushRoller Head ShippingWt.0.128kg(4.5oz) ShippingWt.0.128kg(4.5oz) ™ Not a saleable item. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--64 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TVertical4-CircuitWobbleStickandCatWhisker•SpringReturn NonPlug-in StyleOiltightSwitches RangeofOperation Travel to Operate Contacts Max Travel D D D Travel to Reset Contacts WobbleStick Travels AreMeasuredatRigid CatWhisker SectionofStick or Whisker ProductSelection Operator Torque to Travel to Operate Max Travel to Reset Type Contact Operation Operate (Max.) Contacts (Max.) Travel™ Contacts (Max.) Cat. No. Nylon Wobble 802T--WST 1 2 1 2 Stick 0.79 NSm 3 4 3 4 12° 12° 9° (7 lbSin) 56 56 Wire 802T--WS1T 78 78 Cat Whisker ™ These switches should be mounted in such a way that the wobble stick or cat whisker will not be deflected beyond the ”Maximum Travel” position, as this could cause undesirable repetition of contact action on rebound. ApproximateDimensions[mm (in.)] 1.98 6.35 (0.078) Dia (0.25) 122.17 Operating (4.81) Head 319.02 135.64 (12.56) (5.34) 103.12 (2.34) Z--18210Nylon Z--18211Wire WobbleStick Head WobbleStick Head 17.53 ShippingWt.0.128kg ShippingWt.0.149kg 19 (0.69) 34.93 (0.75) (4.5oz) (5.25oz) 0.75 Dia. (1.375) NPT 46.74 NonPlug-inSwitch 45.97 (1.84) (1.81) ShippingWt.0.45kg(1lb) Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--65 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802THorizontal4-CircuitLeverType•SpringReturn NonPlug-in StyleOiltightSwitches RangeofOperation Travel to Travel to Travel to Operate Contacts Operate Contacts Operate Contacts Max Travel D Max Travel D Max Travel D No Contact D D Movement D Travel to Travel to Reset Contacts Reset Contacts Travel to Reset Contacts Lever OperationWhen Lever OperationWhen802T--W7and Switch StandardLevers AreUsed W8“One-Way” Levers AreUsed WithoutLever ProductSelection Torque to Travel to Travel to Operate Operate Max Reset (Max.) Contacts (Max.) Travel Contacts (Max.) Lever Movement vs. Contact Operation Cat. No. 0.34 NSm 802T--ATH 14° 42° 8° (3 lbSin) Clockwise or 1 2 5 6 1 2 5 6 1 2 5 6 Counterclockwise 0.68 NSm 3 4 7 8 3 4 7 8 3 4 7 8 802T--HTH 6° 50° 3° (6 lbSin) 0.39 NSm 14° 42° 8° 802T--A1TH (3.5 lbSin) 1 2 5 6 1 2 5 6 1 2 5 6 Clockwise 0.68 NSm 3 4 7 8 3 4 7 8 3 4 7 8 6° 50° 3° 802T--H1TH (6 lbSin) 0.39 NSm 802T--A2TH 14° 42° 8° (3.5 lbSin) 1 2 5 6 1 2 5 6 Counterclockwise 1 2 5 6 3 4 7 8 0.68 NSm 3 4 7 8 3 4 7 8 802T--H2TH 6° 50° 3° (6 lbSin) Clockwise Lever cannot move 1 2 5 6 1 2 5 6 802T--L1TH counterclockwise 3 4 7 8 3 4 7 8 0.45 NSm 20° 91° 11° (4 lbSin) Counterclockwise 1 2 5 6 1 2 5 6 802T--L2TH Lever cannot move 3 4 7 8 3 4 7 8 clockwise ApproximateDimensions[mm(in.)] 56.39 45.21 (2.22) (1.78) 19 16.76 (0.75) Dia. (0.66) 38.1 (1.5) 6.35 (0.25) 12.7 2-PoleHorizontalSwitchwith802T--W1Lever (0.5) ShippingWt.0.91kg(2lbs) 88.9 Operating (3.5) Head 76.2 (3) Conduit 19.0 Conduit Position C™ Position B™ (0.75) Conduit 20.6 76.2 (3) 6.35 (0.81) 88.9 19 (0.25) 46.0 (3.5) (0.75) (1.81) Conduit Position A™ Dia. NPT 44.5 (1.75) ™Conduit positions for modifications S1, S2, S3 Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--66 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802THorizontal4-CircuitLeverType•MaintainedContact NonPlug-in StyleOiltightSwitches RangeofOperation Max Travel Travel to Reset Contacts D D D Travel to Operate Contacts Switch WithoutLever ProductSelection Torque to Travel to Operate Travel to Reset Operate (Max.) Contacts (Max.) Contacts (Max.) Lever Movement vs. Contact Operation Max Travel Cat. No. 84° Clockwise or 0.34 NSm 1 2 5 6 1 2 5 6 70° From one maintained 35° 802T--AMTH Counterclockwise (3 lbSin) 3 4 7 8 3 4 7 8 position to the other ApproximateDimensions[mm (in.)] 56.39 (2.22) 45.21 (1.78) 16.76 19 (0.66) (0.75) Dia. 38.1 (1.5) 6.35 (0.25) 12.7 (0.5) 2-PoleHorizontalSwitch Operating with802T--W1Lever 76.2 Head ShippingWt.0.91kg(2lb) (3) 88.9 (3.5) Conduit 4.83 6.35 76.2 (3) (0.19) (0.25) 30.23 88.9 (3.5) 19 (1.19) (0.75) Dia. NPT Levers—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--67 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802THorizontal4-CircuitPushType•SpringReturn&MaintainedContact NonPlug-in StyleOiltightSwitches Top AdjustableTop Side Top Side SidePushRod PushRod PushRod PushRod PushRoller PushRoller Maintained Contact RangeofOperation SpringReturn Maintained Travel to Operate Contacts Max Travel Travel to Reset Contacts D D Normal Operated D Travel to Travel to Max Travel Operate Contacts Operate Contacts ProductSelection Force to Travel to Travel to Contact Operation Operate Operate Max Reset Normal Operated Operator Type (Max.) Contacts (Max.) Travel Contacts (Max.) Cat. No. TopPushRod 802T--BTH 2.4 mm 1.2 mm Adjustable Top Push Rod 802T--BATH 1 2 5 6 1 2 5 6 (0.094 in.) (0.046 in.) 3 4 7 8 3 4 7 8 802T--DTH TopPushRoller 24.4 N 5.9 mm (5.5 lbs) (0.234 in.) Side Push Rod 802T--CTH 2.8 mm 1.6 mm Side Push Vertical Roller 802T--KTH (0.109 in.) (0.062 in.) 802T--K1TH Side Push Horizontal Roller 1 2 5 6 1 2 5 6 3 4 7 8 3 4 7 8 4.87 mm 5.30 mm Maintained Contact 62.2 N 5.96 mm (0.192 in.) (0.209 in.) 802T--CMTH Side Push Rod (14 lbs) (0.235 in.) Nominal Nominal Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--68 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802THorizontal4-CircuitPushType•SpringReturn&MaintainedContact NonPlug-in StyleOiltightSwitches ApproximateDimensions[mm (in.)] Operating 76.2 Head (3) 88.9 (3.5) Conduit 4.83 6.35 76.2 (3) (0.19) (0.25) 30.23 88.9 (3.5) 19 (1.19) (0.75) Dia. NPT 2-PoleHorizontalSwitchBase ShippingWt.0.91kg(2lb) 4.06 (0.16) 9.65 (0.38) 33.27 36.83 67.56 (1.31) (1.45) (2.66) Max 43.69 61.21 (1.72) (2.41) Min 7.87 (0.31) 12.7 (0.5) Z--19243 AdjustableTopPushRodHead Z--21165 TopPushRodHead for 802T--KTH SidePushRodHead ShippingWt.0.128kg(4.5oz) ShippingWt.0.128kg(4.5oz)™ ShippingWt.0.128kg(4.5oz) 12.7 (0.5) 2.87 48.51 30.23 33.27 (1.91) 46.74 (1.13) (1.19) (1.31) (1.84) 51.56 (2.03) 12.7 (0.5) 12.7 11.18 (0.5) 7.87 (0.44) 12.7 (0.31) (0.5) Z--19241 Z--21166 Z--21168 TopPushRoller Head SidePushRoller Head MaintainedSidePushRodHead ShippingWt.0.128kg(4.5oz) ShippingWt.0.128kg(4.5oz) ShippingWt.0.128kg(4.5oz) ™ Not a saleable item. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--69 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802THorizontal4-CircuitWobbleStick&CatWhisker•SpringReturn NonPlug-in StyleOiltightSwitches RangeofOperation™ Travel to Operate Contacts D Max Travel D D Travel to Reset Contacts Travels AreMeasuredat RigidSectionofStick WobbleStick CatWhisker ProductSelection Torque to Travel to Operate Travel to Reset Operate (Max.) Contacts (Max.) Contacts (Max.) Operator Type Contact Operation Max Travel™ Cat. No. Nylon Wobble 802T--WSTH Stick 0.79 NSm 1 2 5 6 1 2 5 6 12° 12° 9° (7 lbSin) Wire Cat 3 4 7 8 3 4 7 8 802T--WS1TH Whisker ™ These switches should be mounted in such a way that the wobble stick or cat whisker will not be deflected beyond the ”Maximum Travel” position, as this could cause undesirable repetition of contact action on rebound. ApproximateDimensions[mm (in.)] 1.98 Dia 6.35 (0.078) (0.25) Operating Head 76.2 (3) 135.64 319.02 (5.34) (12.56) 88.9 (3.5) Conduit 6.35 4.83 76.2 (0.25) (0.19) (3) 88.9 19 30.23 (3.5) (0.75) (1.19) Dia. NPT Z--29195Nylon Z--32109Wire 2-PoleHorizontalSwitch WobbleStick Head WobbleStick Head ShippingWt.0.91kg(2lb) ShippingWt.0.128kg(4.5oz) ShippingWt.0.149kg(5.25oz) Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--70 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TDualSwitchLeverandPushTypes•SpringReturn NonPlug-in StyleOiltightSwitches DualSwitchwith 802T--W1Levers ProductSelection™ Right Hand Switch 802T-A 802T-H 802T-A1 802T-A2 802T-C 802T-D 802T--A 802T--AD 802T--AHD 802T--AA1D 802T--AA2D 802T--ACD 802T--ADD 802T--H 802T--HAD 802T--HD 802T--HA1D 802T--HA2D 802T--HCD 802T--HDD 802T--A1 802T--A1AD 802T--A1HD 802T--A1D 802T--A1A2D 802T--A1CD 802T--A1DD Left Hand Switch 802T--A2 802T--A2AD 802T--A2HD 802T--A2A1D 802T--A2D 802T--A2CD 802T--A2DD 802T--C 802T--CAD 802T--CHD 802T--CA1D 802T--CA2D 802T--CD 802T--CDD 802T--D 802T--DAD 802T--DHD 802T--DA1D 802T--DA2D 802T--DCD 802T--DD ™ Ordering Information—Refer to limit switch listings on pages 5--55 and 5--59 determine which units and levers are correct for the desired application. Select left limit switch from left hand vertical column. Select right hand switch from right hand horizontal column. The correct cat. no. is found at the intersecting box. š Most levers listed on page 5--130 can be used. When dual limit switch combinations are desired, consult your local Rockwell Automation sales office or Allen-Bradley Distributor(see page 13--1). ApproximateDimensions[mm (in.)] 56.39 18.54 18.54 (2.22) (0.73) (0.73) 45.21 (1.78) 19 16.76 (0.75) (0.66) 38.1 (1.5) 12.7 (0.5) DualSwitchwith802T--W1Levers ShippingWt.0.91kg(2lbs) 76.2 (3) 88.9 (3.5) Conduit 20.57 76.2 19 (0.81) (3) 88.9 (0.75) 45.97 0.75 (3.5) (1.81) Dia NPT Leversš—Seepage5--130foracompletelisting ofoperating levers. Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--71 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TAir-Operated•SpringReturn NonPlug-in StyleOiltightSwitches ProductSelection Cat. No. ContactOperation™ Single Unitš Double Unit› Will operate when 25 psi (172 kPa)±25% of air pressure is applied, and will reset with a pressure drop of 6…15 psi (41…103 kPa). 802T--P 802T--2P Maximum allowable pressure is 100 psi (680 kPa). ™ When the switch is in the reset state a small rod protrudes from the top of the die casting. The rod is flush with the surface when the switch trips on higher pressure. The switch can be manually operated by pressing down on the rod. š Contact operation similar to 2-circuit devices. › Contact operation similar to 4-circuit horizontal construction devices. ApproximateDimensions[mm (in.)] 16.76 6.35 9.65 (0.66) (0.25) (0.38) 6.35 26.92 (0.25) (1.06) 72.14 Air-OperatedSwitch (2.84) ShippingWt.0.34kg(12oz) 59.44 (2.34) Conduit 14.73 2--5.4 (0.213) (0.58) 21.34 Dia. Holes for (0.84) 29.46 Front Mtg. 0.5 in. Dia. (1.16) 43.69 NPT 38.86 (1.72) (1.53) Modificationsand Accessories—Seepage5--73. Visitour website:www.ab.com/catalogs. 5--72 Preferredavailability cat.nos.areprintedinbold. LimitSwitches 802TModificationsandAccessories NonPlug-in StyleOiltightSwitches Cavity Mounting TransparentCover Neon Indicating Lights (2-CircuitModelsOnly) Switches can be furnished with a gasket,transparentplastic cover.This Two circuitBulletin 802T surface modification enables the electrician to mounted limitswitches can be supplied inspectterminalwiring withoutremoving with two neon indicating lights—AC the switch cover.Notavailable on cat 208/240V,50…60 Hz and 120V, whisker,time delay orcavity style 50…60 Hz.To order,add the letterN for FrontView Rear View mounted limitswitches. 120V orN5 for240V before the lever designation.Example:Cat.No. 802T--AO with802T--W1A Lever To ordera switch with a transparent 802T--A1 with indicating lights would be cover,add the letterZ to the cat.no.of 802T--A1N.Notavailable on 4-circuit the switch.Forexample:Cat.No. devices. 802T--D becomes Cat.No.802T--DZ. ManifoldMounting In addition,indicating lightkits as shown in the table below are available forfield Extended installation on two circuitdevices. TemperatureOperation Bulletin 802T nonplug-in limitswitches Light Kit Cat. No. are designed to operate in a temperature range of --18…+54°C 120V AC 208/240V AC Limit Switch 802T--AMU with802T--W4A Lever 50…60 Hz 50…60 Hz (0…+130°F).Speciallimitswitches Construction modified forextended temperature Surface 802T-N1 802T-N4 operation --29…+121°C(--20…+250°F) Mounted are available. CavityMounting Neutral Position 802T-N2 802T-N10 Note:Temperature ranges below 0°C Exceptforthe types identified by Cat. (+32°F)are based on the absence of Nos.802T--B,802T--D,802T--WS, freezing moisture orwater. ConduitSeal 802T--WS1,and 802T--CW,Bulletin To ordera Bulletin 802T modified for A synthetic rubberconduitsealis 802T switches can be supplied in a extended temperature operation,insert available to protectthe conduitopening specialconstruction forcavity mounting the letterE afterthe operating head againstentry ofoiland moisture.The in a machine base orpanel.With this designation.Example:Cat.No.802T--A sealcan be added easily before switch construction,the actuatorand contact becomes Cat.No.802T--AE.(Cat.Nos. installation and should be installed so block are mounted on the back ofa 802T--WS,WS1,CW,P,2P and the thatthe 5/8 inch diameterprojection gasketsteelplate.To ordera switch for time delay limitswitches are not (the otherprojection is 23/32 inch cavity mounting,add the letterO to the available forextended temperature diameter)faces againstthe shoulderat cat.no.ofthe corresponding surface operation.Cat.Nos.802T--A3 and A4 the bottom ofthe pipe tap.The sealcan mounted switch.Example:Cat.No. are available forextended temperature accommodate up to fourwires of#12 802T--A becomes cat.no.802T--AO operation exceptwith a reduction in gauge orsmaller.Each wire hole in the (shown). damping.) sealhas a thin innerwallwhich is pierced when a wire is passed through. Manifold Mounting Thus,any unused opening remains Special ConduitPositions Alltwo-circuitBulletin 802T switches sealed.The seatis designed forsingle Dualoperating head switches can be canbesuppliedwithaspecialbase contactblock,surface mounted base obtained with up to three conduit which permits mounting the switch limitswitches having 1/2 inch conduit openings.The location ofconduit manifold style on a machine base, openings. openings A,B,and C are illustrated in panelorraceway.This base is the dimension drawing on page 5--66. equipped with a wiring hole and Conduit seal Cat. No. ............. 802T-N3 The conduitopening in Position A is synthetic rubbergasketon the back 3/4 in.NPT,the conduitopenings in (see illustration). Position B and C are 1/2 inch NPT.To Special ConduitLockNut To ordera switch with a manifold ordera switch with specialconduit This option,a “Tru-Seal”nutwith mounting base,add the letterU to the positioning,add the suffixS1,S2 orS3 threaded PTFE insert,is a valuable cat.no.Example:Cat.No.802T--AM to the cat.no.perthe following: accessory forany Bulletin 802T which becomes cat.no.802T--AMU (shown). S1=Position A+B is connected by means ofconduit. S2=Position A+C S3=Position B+C “Tru-Seal” lock nut for 1/2 inch conduit Cat. No. ....................... 802T-X4 Visitour website:www.ab.com/catalogs. 5--73 Preferredavailability cat.nos.areprintedinbold.