General

Burst according to IEC 1000-4-4: 6 kV 6/50 ns
Dual-chamber system for terminal cross-sections of 1 x 0.5 mm2…2 x 2.5 mm2 (solid) or stranded 2 x 2.5 mm2 (flexible with sleeve), #20…14 AWG. Finger protection according to VDE 0106.
Enclosed: –25…+45 °C
ESD discharge according to IEC 1000-4-2: Contact 8 kV, air 8 kV Electromagnetic HF field according to IEC 801-3 and conducted electromagnetic HF signal according to IEC 801-6: Level 3
IP 30 (Single-function)
Max. 50 m (160 ft) with load (
Relay OFF: 0.7K-4K ohms
Storage: –40…+85 °C
Temperature: ±0.025%/°C
Terminal:IP 20 according to IEC 947-1

1.5 A/250V AC (B300), 3 A/120V AC (B300)

Outputs

Ambient Temperature

Open: –25…+60 °C

Approval

UL, C-UL

Cable Length

Max. 250 m (800 ft) without parallel load between B1 and A2

Cable Length (Supply Voltage Control)

Max. 250 m (800 ft)

Certifications

cULus Listed (File No. E14840, Guide NKCR/NKCR7), CE Marked

Climatic Withstand

56 Cycles (24 hr) at 25…40 °C and 95% relative humidity according to IEC 68-2-30 and IEC 68-2-3

Contact Output

(SPDT) 1 C/O

Contact Type

Relay as changeover switch, Dielectric Coil to Contact

Disposal

Synthetic material without dioxin according to EC/EFTA notification Number 93/0141/D electrical contacts with cadmium

EMC/Emission

Electromagnetic fields according to EN 55 022: class B

EMC/Interference Immunity

Performance of following requirements: Surge capacity of the supply voltage according to IEC 1000-4-5: 4 kV 1.2/50 ms

Input Current

1 mA

Input Impedance

Relay ON: 3K-13K ohms

Input Voltage

50/60 Hz
Supply voltage range

Insulation Characteristics

2 kVAC/50 Hz test voltage according to VDE 0435 and 6 kV 1.2/50 ms surge voltage according to IEC 947-1 between all inputs and outputs

Life

Mechanical: 30 million operations, Electrical operations:4 Mil. at 1 A/250V AC, cos f - 1, 0.2 Mil. at 6 A/250V AC, cos f - 1, 1.5 Mil. at 1 A/250V AC, cos f - 0.3, 0.3 Mil. at 3 A/250V AC, cos f - 0.3, 0.5 Mil. at 6 A/24V DC, resistive, 2 Mil. at 4 A/24V DC, resistive, 2 Mil. at 0.2 A/230V DC, resistive, 1 Mil. at 0.4 A/24V DC, L/R - 20 ms, 1 Mil. at 0.2 A/110V DC, L/R - 20 ms, 1 Mil. at 0.1 A/230V DC, L/R - 20 ms

Max. Leakage Current

400 micro Amps

Mounting

Front mounting; For snap-on mounting on 35 mm DIN Rail or screw fixing by adapter and 2 screws (M4 type)

Operating Mode

One Shot / Watch Dog(Pulse Controlled)

Power Consumption

0.5 W at 24V DC, 5 VA at 240V AC

Protection Class

Enclosure:IP 40

Pulse Duration

³50 ms (AC), ³30 ms (DC)

Repeatability

±0.2% of the setting values

Reset Time

50 ms

Safe Isolation

According to VDE 106, part 101

Shock Resistance

50 g according to IEC 68-2-27

Short-Circuit Resistance

10 A gL

Standards

EN/IEC 60947-1, EN/IEC 60947-5-1, UL 508, CSA 22.2 No. 14

State Indicator

1 LED, combination signal

Supply Voltages

24…48V DC and 24…240V AC, 50/60 Hz (multi voltage)

Switching Capacity

Voltage: 440V AC, Current Ith (AC-1): 8 A (5 A for 700-FSQ), Power: 2000 VA According to IEC 947-5-1:, 3 A/440V AC (inductive load, AC 14) 3 A/250V AC (inductive load, AC 15), 1 A/24V DC (inductive load, DC 13), According to UL 508:

Terminals

Screw terminal M3.5 for Number 2 Posidrive, Philips, and slotted screws. Suitable for power screwdriver. Rated tightening torque 8.8 lb.-in. (0.8 N•m, max. 1.2 N•m).

Time Energized

100%

Timing Range

0.5 s…10 s

Tolerance

Voltage: ±0.001%/%DU

Vibration Resistance

4 g in three axes at 10…500 Hz, test FC according to IEC 68-2-6

Voltage Interruption

£20 ms without reset (supply voltage)

Voltage Tolerance

–20…+20% (DC), –15…+10% (AC)

Weight

100 g

Withstand Voltage

5000 V