Application Note 1606-XLP30E with DC 24...28V/30 W • Mounted and connected • 100...240V Wide Range Input in record time, no tools required (AC 85...264V permitted) • World-wide approvals ( ) • Exceptional Overload Design for industry (no switch off at overload but up to 1.5 times nominal current) • Tiny: WxHxD = 45 x 75 x 91mm • Output voltage adjustable to DC 28V • Input • Construction, Mechanics, Installation Input voltage AC100...240V (Wide Range), 47...63Hz Robust plastic housing (US Patent No. D442, 923S), fine ventilation grid on three Admiss. limits: AC 85...264V (DC 85...375V) housing sides to keep out small parts (e.g. screws), IP20 Input current <0.6A (@ AC 100V, 30W P ) Dimensions and weight out <0.35A (@ AC 196V, 30W P ) •B x H x T 45mm x 75mm x 91mm (+ DIN Rail) out Depth incl. terminals: 98mm (+ DIN Rail) External Fusing Unit has internal (not accessible) input fuse. No other •Weight 230g protection required. In order to meet local requirements, please consult local codes and regulations for proper in- Mounting orientation , or (cf. ‘Output’) stallation. Ventilation/Cooling Normal convection, no fan required Transient immunity Transient resistance acc. to VDE 0160 / W2 • Free space f. cooling recommended: 25mm on sides with ventilation grid (750V / 1.3ms), over entire load range Easy snap-on mounting onto the DIN-Rail (TS35/7,5 or TS35/15). Hold-up time >190ms bei AC 230V, 24V / 1.3A Unit sits safely and firmly on the rail; no tools required even to remove (see diagram below) >107ms @ AC 196V, 24V / 1.3A Connection by Spring Clamp terminals; uniformly firm hold, vibra- >19ms @ AC 100V, 24V / 1.3A tion-resistant and maintenance-free: 2 terminals per output • Efficiency, Reliability • Wire strip length 6mm (0.24in) recommended Efficiency typ. 87.5% (AC 230V, 24V / 1.3A) • Wire Size Input/Output Stranded 28...12 AWG (0.3...2.5 mm²), (see also diagram below) Solid 28...12 AWG (0.3...4 mm²) Losses typ. 4.5W (AC 230V, 24V / 1.3A) Design details – for your advantage: MTBF (Reliability) ca. 650.000h acc. to Siemensnorm SN 29500 • All terminals are easy to reach as mounted on the front panel. (24V/1.3 A, AC 230V, T = +40°C) amb • Input and output are strictly apart from each other (input below, output above) and Prior to shipment, every unit undergoes the following tests in order to isolate any de- so cannot be mixed up fective units which might suffer an early failure: • Mounting and connection do not require any screwdriver • Run-in / burn-in (Full load, T = +60°C, on/off cycle) amb → Easy, quick, durable and reliable installation • Functional test (100%) 1 Publication 1606-AP003A-EN-E March 2003 2 Application Note • Output • Environmental Data, EMC, Safety Output voltage DC 24...28V, adj. by front panel potentiometer Ambient temperature range (measured 25mm below unit) •preset 24.5V ±0.5% • storage, transport -25°C ... +85°C • operation -10°C ... +70°C (for derating see diagram below) Voltage regulation static 0.5% V , dynamic ±2% V overall out out Humidity max. 95% (without condensation) Ripple/Noise <50mV (20MHz bandwidth, 50 Ω− measurement) PP Electromagnetic EN 50081-1 (includes EN 50081-2) Overvoltage prot. (OVP) <40V Class B (EN 55011, EN 55022) incl. Annex A thanks to emissions (EME) Output noise suppression Radiated EMI values below EN50081-1, even when us- noise suppression ing long (>2m), unscreened output Electromagnetic EN 61000-6-2 (includes EN 55024) cables immunity (EMI) Rated continuous loading up to 1.3A (convection cooling) Safe low voltage: SELV (EN60950, VDE0100/T.410), PELV (EN50178) depending on built-in orientation, V and T ; in amb Prot. class/degree: Class I (EN60950) / IP20 (EN60529) for details see derating diagram below The PSU complies with all major safety approvals for EU (EN 60 950, Overload behavior No switch-off at overload/short-circuit, instead: up to EN 60204-1, EN 50178), USA (UL 60950, E137006, UL508 LISTED, E198865), 1.5 ⋅ I So you need no oversizing to start awkward rated. Canada (CAN/CSA-C22.2 No 60950 [CUR], CAN/CSA-C22.2 No. 14 [CUL]). loads. Operation on IT networks: The unit is designed to operate on IT networks. The unit Protection Unit is protected against (also permanent) short-circuit, may still deliver a hazardous voltage after the fuses are tripped. overload and open-circuit Derating depending on built-in orientation; see diagram below Parallel operation Yes Power back immunity 35V Operation indicator Green LED (DC ON) • Diagrams Output characteristic V /I Efficiency Derating Hold-up time with ACin out out (min.) (@ V = 24V, typ.) of output power (@ V = 24V, typ. + min.) out out 120 30 90 40 88 Vout range 25 100 A 86 30 20 84 80 a B 82 100 V ACin 15 20 120 V ACin 60 80 230 V ACin 230V ACin 10 78 Mounting 40 Pout=30W, typ. 100-120V ACin 10 b Pout=30W, min. 76 85-264 V ACin A-a A-a A-b 5 Pout=15W, typ. 20 85-370 V DCin B-a B-a B-b 74 Pout=15W, min. 0 72 0 0 0,0 0,5 1,0 1,5 2,0 2,5 0,3 0,5 0,7 0,9 1,1 1,3 -10 0 10 20 30 40 50 60 70 90,0 125,0 160,0 195,0 230,0 Ausgangsstrom Iout [A] Output current Iout [A] Ambient Temperature [°C] Input voltage V ACin [V] Specifications valid for 230V AC input voltage, +25°C ambient temperature, and 5 min run-in time, unless otherwise stated. They are subject to change without prior notice. www.rockwellautomation.com Corporate Headquarters Rockwell Automation, 777 East Wisconsin Avenue, Suite 1400, Milwaukee, WI, 53202-5302 USA, Tel: (1) 414.212.5200, Fax: (1) 414.212.5201 Headquarters for Allen-Bradley Products, Rockwell Software Products and Global Manufacturing Solutions Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444 Europe: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36-BP 3A/B, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640 Asia Pacific: Rockwell Automation, 27/F Citicorp Centre, 18 Whitfield Road, Causeway Bay, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846 Headquarters for Dodge and Reliance Electric Products Americas: Rockwell Automation, 6040 Ponders Court, Greenville, SC 29615-4617 USA, Tel: (1) 864.297.4800, Fax: (1) 864.281.2433 Europe: Rockwell Automation, Brühlstraße 22, D-74834 Elztal-Dallau, Germany, Tel: (49) 6261 9410, Fax: (49) 6261 1774 Asia Pacific: Rockwell Automation, 55 Newton Road, #11-01/02 Revenue House, Singapore 307987, Tel: (65) 351 6723, Fax: (65) 355 1733 Publication 1606-AP003A-EN-E March 2003  2003 Rockwell International. All Rights Reserved. Printed in US Ausgangsspannung Vout [V] Efficiency [%] Output power [W] Hold-up time [ms]