11Mbps Wireless LAN WLAN-9100 Access Point Features • Features 11Mbps data rate by incorporating Direct Sequence Spread Spectrum technology. • Fully IEEE 802.11b compatible. Allows inter-operation among multiple vendors. • Technique operating in the unlicensed 2.4Ghz ISM band. • Seamless roaming within the 802.11 & 802.11b wireless LAN infrastructure. • Provides user authentication to enforce tight security. • Supports WEP & MAC address control. • Highly efficient antenna provides a range of operation up to 800 feet in free space. • Provides Windows-based Diagnostic, Statistics Tools and Traffic Monitor. Introduction • Bridge Function: Transparent bridging between Ethernet, airwaves The WLAN-9100 performs as a fast and cost-effective bridge between RF access protocol: CSMA/CA+ACK (per IEEE 802.11 specification) wired and wireless local area network. It provides users with the advantage of easy-to-extend networking and mobility. Fully compliant • Protocol: CSMA/CA+ACK (per IEEE 802.11 specification) with the IEEE 802.11(b), 11Mbps Wireless LAN standard, the WLAN- • Roaming: IEEE802.11b MAC Function supported 9100 features many powerful functions such as: high-security WEP40 • Operation Frequency/Operation Channels: protection, self-diagnostic configuration utility, Web management, SNMP 2.412~2.462 GHz (N.America)/11 Channels and more. Thus, the WLAN-9100 sespecially suitable for difficult-to- 2.412~2.472 GHz (Japan TELEC)/14 Channels wire environments and mobile workers. 2.412~2.472 GHz (Europe ETS)/13 Channels Placed anywhere along an Ethernet LAN, the WLAN-9100 allows wireless • Configuration: Windows-based Utility, SNMP, RS-232/Telnet, Web stations to transparently access the corporate network. The numerous wireless LAN devices can connect to one WLAN-9100 without limitation. • Ethernet Connector/Physical Interface: 10/100 base-T(RJ-45) By detecting WLAN-9100 automatically, wireless LAN devices can roam • Serial Port: RS-232 (configuration port) different areas as long as they are the same settings. In addition, the • Operating Temperature: 0~70° C WLAN-9100 also provides WEP40 standard and MAC Access Control • Storage Temperature: -20~80° C to protect transmission security. This makes it suitable for high-security networking. We also provide four convenient methods to configure the • Humidity (non-condensing): 5~80% WLAN-9100: Web management, telnet, configuration utility, RS-232. • Dimension: 184 mmL x 142 mmW x 50 mmH You can configure it remotely via Internet. For further transmission • LED indicators: Power, AP, Wireless Activity, Ethernet Activity, security, the WLAN-9100 adapts MAC access control capalsilities to Connection limit the specific wireless LAN devices joining the network. • Power comsumption: Tx: 12 V @ 450 mA Rx: 12 V @ 320 mA Specifications • Modulation: Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) Ordering Information • Speed Option: Data rate selection (11, 5.5, 2 and 1 Mbps per � � channel), also support auto rate selection � � � WLAN-9100A/WLAN-9100E/WLAN-9100J 11 Mbps Wireless LAN Access Point for US/European/Japan • Range Coverage: Maximum 800 feet (open space) standard • Antenna: Integrated with various high-gain antenna. � � � � � ANT-2010 Directional antenna, 18 dBi, 50 W • Sensitivity: -83 dBm (at 1E-5 BER) � � � ANT-2011 Directional antenna, 13.9 dBi, 50 W � � � � � ANT-2012 Non-directional antenna, 3 dBi, 50 W � � • Power Supply: 12 V (AC power supply included) DC � � � � � ANT-2013 Non-directional antenna, 0 dBi, 2 W • RF Output Power: 13 dBm � � � � � ANT-2014 Non-directional antenna, w/MMCX connector 0 dBi, 10 W � � � � � Connect-3010 30 cm MMCX-SMA connector FCC ETSI Industrial Communications 7-12 NEW