Intelligent SNMP/HTTP SNMP-1000-B System Manager Features  Monitors system fans, temperature, voltage, power supply, CPU fan, CPU temperature, Vcore, watchdog timer, etc.  Stand alone system monitoring: no driver needed, OS-independent  Remote alarm notification through SNMP/HTTP, e-mail or pager  Easy status monitoring through Ethernet using a browser  Highly reliable: functions even when system or power fails  Modular design eases system integration and customization Introduction The SNMP-1000-B is a platform independent system management module that can detect system operating conditions and notify users to take necessary action to avert system failure through multiple communication protocols. With the SNMP-1000-B installed, a system monitoring and management can be integrated into an existing SNMP-based network management environment. The SNMP-1000-B also has a built-in web-based administration interface which allows users to monitor the system operation from any place with Internet connectivity. The SNMP-1000-B adds another dimension of reliability to your most critical applications. Powerful yet Easy to Use The SNMP-1000-B can detect a wide variety of internal system conditions, including temperature, voltage, fan rotation, power supply or CPU operations such as watchdog timer output. Through its I2C interface it can even monitor CPU temperature and voltages of Advantech’s full-sized CPU cards. Depending on the alarm severity or user setup, it can generate several different alarm outputs, including SNMP trap, e-mail, pager, acoustic signal, system reset and digital output. Through the easy-to-use web-based user interface, users can set the alarm criteria and select alarm outputs for each sensor input independently to meet user requirements. The backup battery enables the SNMP-1000-B to perform its alarm function even during total system power failure. Web-enabled, No Driver Needed The onboard 10/100 Mbps Fast Ethernet interface enables the SNMP-1000-B to be connected to your existing network, independent from the system’s connection. It supports multiple network protocols such as TCP/IP, SNMP, HTTP and Telnet, allowing you to manage your systems simply by using a web browser. No special software driver is needed thus eliminating compatibility issues with different operating systems. Online Upgrade and Batch Setup You can upgrade the firmware online by using the included setup utility. There is no need to go to a remote site and disassemble the chassis to collect each SNMP-1000-B module or card for firmware upgrade. The setup utility also supports “batch setup” function, which allows you to save a configuration and duplicate it to many other SNMP-1000-B modules and cards. This function saves tremendous time and effort when you have a number of SNMP-1000-B units installed in your environment. Flexible Modular Hardware Design The modular design of the SNMP-1000-B allows it to be easily customized to fit into any system. The ultra compact module is only 41 mm wide and 94 mm long. It can be mounted on standard or customized carrier boards to plug into any standard PCI/ISA slot. Optional SNMP-1000-E1B1 SNMP-1000-E2B1 SNMP-1000-B Firmware Specifications Sensor Specifications Real-time healthy status monitoring: Provides real-time Voltage Input +5 V , -5 V , +5 V , +3.3 V , +12 V , -12 V DC DC SB DC DC DC status display in HTTP/Java graphical format System Status 9 (one for on-board sensor, eight for external Input Monitoring and History log up to 600 records. Data can be downloaded sensors) Management through network or sent by e-mail Sensor LM75 Temperature Alarm event record display 2 Interface I C E-mail: Can set up to 4 addresses to receive e-mails Range -30 ~ 125 °C (-22 ~ 257 °F) SNMP trap: Notify up to 8 SNMP administrators Input 9 (7 for SNMP-1000-E2A1) Fan Speed Alarm Notification Pager notification: Dial out through external modem to Range 700 ~ 10000 rpm send messages to up to 8 pagers Input 4 (1 for SNMP-1000-E2A1) Power Good Audible alarm sound Range High > 2.4 VDC, Low < 0.8 VDC TCP, UDP, IP, ICMP, DHCP, BOOTP, ARP, SNMP, HTTP, 2 Supported Protocols Interface I C Telnet CPU Vcore, CPU fan, CPU temperature (up to 2 Web-based remote configure, control and monitor Input CPUs), +5 V , -5 V , V , +12 V , -12 V DC DC I/O DC DC Remote reset, power down and power up CPU Card PCA-6002-B, 6003, 6004, 6005-B, 6181, Remote digital output signal control Healthy 6183,6184, 6185, 6186, 6277-B, 6187, 6188, Management Function Remote message display control Compatibility 6189, 6190 AIMB-740, 741, 742, 744, 750, 760,762, Firmware upgrade from serial port and Ethernet port 560,554 Modem dial in (console mode only) Input 8 (SNMP-1000-E1B1 only) Digital Input/ Output Output 4 (3 for SNMP-1000-2A1) System Specifications Processor System CPU 80188 compatible Firmware 512 KB Embedded Flash ROM Environment Memory 512 KB SRAM Ethernet Interface 10/100Base-T Interface RS-232 Serial Port Baud Rate 9600 bps Buzzer Support Yes Miscellaneous Detect Time-out Signal of System Yes Watchdog Timer Yes Charge Time 3 hr Battery Type Li-Ion Battery Capacity 1800 mAh (full charged, for 45 ~ 50 minutes operation, depending on system configuration) Battery Life 1 year @ 20° C, 80% capacity after 500 cycles of charge and discharge Typical 5 V @ 550 mA Operating Non-Operating Power Requirement Temperature 0 ~ 60° C (-32 ~ 140° F) -20 ~ 70° C (4 ~ 158° F) Humidity - 5 ~ 95 % RH, non-condensing Dimensions Kernel module: 40.5 x 93 mm (1.59" x 3.66") Physical Characteristics Carrier board: 55 x 115 mm (2.17" x 4.53") PCI/ISA I/O extension module: 175 x 107 mm (6.89" x 4.21") Ordering Information Part Number Description SNMP/HTTP system manager development kit, including the kernel module mounted on a PCI/ISA carrier board, 3 sets of temperature sensors, SNMP-1000-E1B1 and cables SNMP/HTTP system manager card for ACP series chassis, including the kernel module SNMP-1000-E2B1 * Compatible with Advantech chassis series: IPC-622, IPC-623, IPC-7143, IPC-7220 and all ACP series chassis (except ACP-1000P2/X2) Online Download www.advantech.com/products