Industrial Trading chervon right Manufacturers chervon right A chervon right ADVANTECH chervon right SF-420
About product Specifications Features Datasheet FAQ

ADVANTECH SF-420

Image of ADVANTECH SF-420

Description

ADVANTECH SF-420 4U Rackmount Packet-Switched Blade Server

Part Number

SF-420

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

Rack Mount

Specifications

BIOS

Award 2 MB Flash (remote setup, network booting optional)

Capacity

512 MB

Chipset

Intel 440GX

Connector

RJ-45 x1

Controller

69030
Intel 82559 x2

CPU

Intel Pentium III low power (fanless)

Dimensions (W x D)

233.35 x 160 mm (9.2" x 6.3"), 1-slot width

Form Factor

2.5" (IDE) 30 GB

Front Side Bus

100 MHz

Interface

10/100Base-TX
PCI Mezzanine (IEEE1386)

L2 Cache

256 KB

Max. Speed

700 MHz (100 MHz FSB)

Monitor

CPU temperature, 3.3 V/5 V/12 V, fan

On board Controller

Winbond W83782D

On-board Memory

4 MB VRAM

PCI-to-PCI Bridge

Intel 21154 x1

Signal

5 V/3.3 V compliant

Site

1 (2 if without built-in HDD )

Socket

144-pin SO-DIMM x2

Solid State Disk

CompactFlash (optional)

Technology

PC-100 SO-DIMM SDRAM with ECC support

Weight

0.7 Kg (1.54 lb)

Features

Datasheet

pdf file

SF-420.pdf

207 KiB

Extracted Text

SF-420 4U Rackmount Packet-Switched Blade Server Features § 4U, rugged 19-inch rackmount enclosure ® ® § Seven hot-swappable Intel Pentium III 700 MHz server blades § One built-in layer 3 switch blade § Hot-swappable fans ® § PICMG 2.16/2.9 compliant § Independent system node architecture § 300 W ATX 1+1 redundant power supply § Independent Chassis Management Module (optional) § Designed for NEBS Introduction The SF-420 Blade Server platform is an open standard system that complies with the following specifications. ® ¨ PICMG 2.0, R3.0 CompactPCI Specification ¨ PICMG 2.1, R2.0 Hot-Swap Specification ¨ PICMG 2.16, R1.0 Packet Switching Backplane Specification ¨ PICMG 2.9, R1.0 IPMI System Management Specification This CompactPCI platform contains seven server blades and one switch blade in a 4U enclosure. It also comes with leading-edge hot-swap and ESAN (Embedded System Area Network) technologies, making it ideal for carrier-grade telecom and Internet applications. It offers ultra-density, low power consumption, high computing performance, along with high reliability and availability. The SF-420 is modular, scalable and easily developed, and is interoperable with third-party blades that comply with the PICMG specifications mentioned above. The hot-swappable components include all parts that could possibly fail: server blades, power supply, fans, CMM, etc. With these hot-swap features, it provides redundant capability, simplifying replacement and minimizing service time. A CMM (chassis management module) provides remote management functions for IT managers to monitor the health conditions of all components inside the chassis at any time and anywhere. With integrated layer 2-3 switch blade and packet switch backplane, the SF-420 Blade Server routes IP signals across the internal backplane without complex traditional cables, saving time in set-up, maintenance and repair, and eliminating the possibility of unstable cabling. Server Blade (MIC-3368) The MIC-3368 series server board comes with Intel Pentium III low power 256 KB L2 cache, 512 MB memory with ECC and 30 GB HDD. The KB/Mouse and VGA ports are all located on the rear side, and can be easily connected to a KVM switch for system installation through the optional SCSI feature in the rear I/O card. The system can also connect to an external SCSI RAID, as a back end storage solution. Switch Blade (MIC-8101) The SF-420 Blade Server supports a PICMG 2.16-compliant switch blade, the MIC-8101 10/100 Ethernet (Layer 2-3) switch. This high-performance managed Layer 3 switch with 22 10/100 Mbps Ethernet ports and dual Gigabit Ethernet ports enables fast connection speeds and flexibility in a 6U CompactPCI board. The in-chassis switch minimizes external wiring and needs no extra rack height, thus improving density and reliability. The console is accessed through an RS-232 serial cable to configure the following management functionalities: SNMP, Telnet CLI and RMON. The MIC-8101 Ethernet switch routes and switches at full wire speed with its non-blocking architecture, and features sophisticated multicast protocols to limit unnecessary traffic. Chassis Management Module (MIC-3924) The built-in system management module is an OS independent hardware module that ensures system stability and real-time status. It monitors the chassis temperature, fan speed, and health of each server board. The users will be notified of any abnormal system operating condition, so they can take the necessary action to avert system failure. The built-in web-based administration interface allows monitoring of the system’s operation from any place with Internet connectivity. Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04 SF-420 System General Specifications Features Switchblade 1 Slot Serverblade 7 CMM 1 Cooling Fan 1(hot-swap,163CFM),1(hot-swap,44CFM) Input AC100~240V@47~63Hz,fullrange(PFC) PowerRequirement Output 300WATX(1+1redundant,300W/each) Safety CE,UL,TÜV,CB Operating Non-Operating Temperature 0~45°C(32~113°F) -20~60°C(-4~140°F) Environment Humidity -- 5~95%@60°C,non-condensing Vibration(5-500Hz) 1.0Grms 2.0G Dimensions(WxHxD) 440x177x340mm(17.3"x7"x13.4") Physical Weight 20Kg(44lb) PICMG2.0,R3.0CompactPCISpecification PICMG2.1,R2.0Hot-SwapSpecification Compliance Standard PICMG2.16,R1.0PacketSwitchingBackplaneSpecification PICMG2.9R1.0SystemManagementSpecification Server Blade Specifications (MIC-3368E) MIC-3368E CPU IntelPentiumIIIlowpower(fanless) Max.Speed 700MHz(100MHzFSB) Processor L2Cache 256KB Chipset Intel440GX BIOS Award2MBFlash(remotesetup,networkbootingoptional) FrontSideBus 100MHz Bus PCI 64-bit/33MHz(databus) PCI-to-PCIBridge Intel21154x1 SCSIControllerSupport RearI/O Technology PC-100SO-DIMMSDRAMwithECCsupport Memory Capacity 512MB Socket 144-pinSO-DIMMx2 On-boardHDD FormFactor 2.5"(IDE)30GB Controller 69030 Graphic On-boardMemory 4MBVRAM Interface 10/100Base-TX Ethernet Controller Intel82559x2 Connector RJ-45x1 EIDE Mode ATA33 Site 1(2ifwithoutbuilt-inHDD) PMC Interface PCIMezzanine(IEEE1386) Signal 5V/3.3Vcompliant LAN 1 FrontI/OInterface Serial 1(RS-232,RJ-45connector) OperatingSystem Compatibility Windows2000/NT4.0/XP,RedHatLinux7.2,SunSolaris8.0 OnboardController WinbondW83782D HardwareMonitor Monitor CPUtemperature,3.3V/5V/12V,fan Output Interrupt,systemreset WatchdogTimer Interval Programmable,0~63sec. Miscellaneous SolidStateDisk CompactFlash(optional) Dimensions(WxD) 233.35x160mm(9.2"x6.3"),1-slotwidth Physical Weight 0.7Kg(1.54lb) Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04 Switch Blade Specifications (MIC-8101) +3.3V +5V +12V PowerConsumption Typical 6A 4A 20mA 2210/100FastEthernetportstothemid-planeconnectors 210/100FastEthernetports(RJ-45)onthefrontpanel Auto-negotiationfunctionfor10M/100Mspeed,duplex(fullandhalf)andflow-control AutopolarityandautoMDI/MDI-X Layer2SwitchingFunction 8000entryMACaddressforwardingtable IEEE802.3x-compliantflowcontrolsupportinfull-duplex 802.1DSpanningTree/802.1QtaggedVLAN/802.1ppriority Electrical GARPVLANregistrationprotocol Hardware-basedLayer3IPswitching 2000entryIPaddressforwardingtable RIP-I/IIroutingprotocol Layer3SwitchingFunction IPv4/IGMPv2/DVMRPv3/802.1Dframe/DHCP/BootPrelay PIMdensemode/IPmulti-netting/IPfragmentation PathMTUdiscovery WirespeedIPforwardingrate Dimensions(WxD) 233.35x160mm(9.2"x6.3"),1-slotwidth Physical Connector J1~J5 PICMG2.16,R1.0PacketSwitchingBackplaneSpecification Compliance Standard PICMG2.9,R1.0SystemManagementSpecification CE Regulatory Safety UL/cUL60950,EN/IEC60950,CBreportScheme Emission FCCPart15(subpartB),EN55022,CISPR22,BellcoreGR-1089 Rear Transition Board RearPanel On-boardHeader PartNumber SCSI KB&Mouse COM2 LAN VGA USB IDE FDD COM1 USB CF PIM Parallel RIO-3308C-A - 1 1 2 1 1 2 1 1 1 1 -- 1 System Configurations PartNumber CPUBoard RIO SCSI(onRIO) CMM PCI-to-PCIBridge SF-420A-SN7F1 MIC-3368E-A RIO-3308C-A Yes MIC-3924B Yes Ordering Information PartNumber Descriptions 4UBladeServerwithsevenCPUboardsbuilt-inwith512MBmemoryand30GBHDD,SCSIinterfacesupportonRIO,andone SF-420A-SN7F1 10/100EthernetFabricSwitch,AdvanceChassisManagementModule Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04 SF-420 PICMG 2.16-compliant switch blade MIC-8101, 10/100 Ethernet (Layer 2-3) switch. Hot-swappable 163-CFM fan 300 W ATX 1+1 redundant power supply Up to seven hot-swappable Intel Pentium III 700 MHz server blades - MIC-3368E, PICMG 2.16/2.9 compliant Two 10/100 Mbps LAN Two Gigabit Ethernet ports RS-232 serial port for out-of- band management and system diagnosis Power switch LED for hot-swap COM LEDs for power, temperature and LEDs for power, HDD fan failure 10/100 Mbps LAN port Rear transition board - RIO-3308 LAN port RS-232 COM port COM2 CompactPCI Intelligent Chassis Management module - MIC-3924B VGA port Two LAN ports USB port The web-based user interface allows users to set the alarm criteria, and select alarm outputs for each sensor input independently. Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04

Frequently asked questions

How does Industrial Trading differ from its competitors?

chervon down
Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Is there a warranty for the SF-420?

chervon down
The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carrier will Industrial Trading use to ship my parts?

chervon down
We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Can I buy parts from Industrial Trading if I am outside the USA?

chervon down
Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Which payment methods does Industrial Trading accept?

chervon down
Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Advantech 96OT-MT-690124 24" rackmount

Advantech IPC-6520-B Rack Mount, 19" Rackmount Kit for 14"/15" Monitors