ADVANTECH PCM-200
Specifications
2nd Cache Memory
128 KB on the Celeron® processor, 256 KB on Pentium III processor
Audio
8 TTL DIO or 6 TTL DIO & 2 Isolated DIO
Battery
Lithium 3 V/196 mAH
BIOS
AWARD 256 KB Flash BIOS
Digital I/O
ESS ES1989 supports AC’97 2.0 compliant, Mic-in, Line-in, CD Audio-in, Line-out, Speaker-out
Dimension (L x W)
EBX form factor, 203 x 146 mm (8" x 5.75")
Expansion Interface
PC/104-Plus (ISA & PCI)
IrDA
115 Kbps, IrDA 1.1 compliant
LCD Interface
Support for 9, 12, 18, 24, 36, 48-bit TFT and 16 or 24-bit displays; DSTN panels up to SXGA resolution
Operating Humidity
0% ~ 90% Relative Humidity, non condensing
Operating temperature
0 ~ 60° C (32~140° F)
Power supply Voltage
+5 V ± 5%, Max.:4.5 A @ +5 V, Typical:3.8 A @ +5 V; (with 64 MB DRAM, Intel Pentium III-500)
Resolution
CRT Mode:1280 x 1024@16 bpp (60 Hz), 1024 x 768@16 bpp (85 Hz); LCD/ Simultaneous Mode:1280 x 1024@ 16 bpp (60 Hz), 1024 x 768@16 bpp (60 Hz); Dual Display mode:Supports 18-bt/24-bit Dual TFT; LCD under Windows 98, Windows ME, Windows 2000 D1 up to 1024 x 768@16 bpp D2 up to 1024 x 768@ 24bpp
SSD
CompactFlash card Type I/II and DiskOnChip
System Chipset
Intel 440BX AGPset, 100 MHz FSB
System Memory
SDRAM 168-pin DIMM x 1, Max. 256 MB
TV-out
Supports both NTSC/PAL, S-video and Composite Video
USB
2 USB ports, USB 1.1 compliant
Watchdog Timer
1 - 62 sec 62 level timer intervals, system reset or IRQ11
CPU
Embedded Intel low power Celeron-400/Pentium III-500 CPU
Display Memory Size
4 MB on Lynx 721 chip
Display Chipset
2x AGP SMI Lynx 721 chip, 3D Engine
Ethernet Chipset
RealTek RTL8139C, optional Intel 82559 (ER)
Ethernet Interface
IEEE 802.3u 100BASE-T Fast Ethernet compatible; Built-in boot ROM in Flash BIOS
MIO
2 x EIDE (Ultra DMA33), 1 x FDD, 1 x K/B, 1 x Mouse, 1 x RS- 232/422/485, 3 x RS-232, 2 x LPT
Weight
0.57 kg (weight of total package)
Datasheet
Extracted Text
® ® Low Power Intel Pentium III SBC with CPU, Audio, VGA/LCD and Ethernet PCM-9572 Back light Features connector USB Audio CRT LCD ® ® ® display display Ethernet CD Audio in � Embedded Intel low power Pentium III/Celeron processor TV-out � Fanless, 0 ~ 60° C operation Power � EBX form factor � Supports Wake-on-lan, Wake-on-modem KB/Mouse � Supports LCD backlight turn-off function FDD interface � 4 COM ports with power and DIO for POS market DIMM EIDE 1.2 4 COM ports � Dual 18/24-bit LCD displays, or one 48-bit TFT LPT 1.2 CompactFlash (On the solder side) ® Embedded Pentium III PC/104+ Digital I/O ® procossor DiskOnChip IrDA Display SpeciŢ cations � Chipset 2x AGP SMI Lynx 721 chip, 3D Engine ® ® � CPU Embedded Intel low power Celeron -400/ � Memory Size 4 MB on Lynx 721 chip ® Pentium III-500 CPU � Resolution CRT Mode: 1280 x 1024@16 bpp (60 Hz), � System Memory SDRAM 168-pin DIMM x 1, Max. 256 MB 1024 x 768@16 bpp (85 Hz) ® � 2nd Cache Memory 128 KB on the Celeron processor, 256 KB on LCD/ Simultaneous Mode: 1280 x 1024@ 16 bpp (60 ® Pentium III processor Hz), 1024 x 768@16 bpp (60 Hz) ® � System Chipset Intel 440BX AGPset, 100 MHz FSB Dual Display mode: Supports 18-bt/24-bit Dual TFT � BIOS AWARD 256 KB Flash BIOS ® ® ® LCD under Windows 98, Windows ME, Windows ® � SSD CompactFlash™ card Type I/II and DiskOnChip 2000 D1 up to 1024 x 768@16 bpp D2 up to 1024 x � Watchdog Timer 1 - 62 sec 62 level timer intervals, system reset or 768@ 24bpp IRQ11 � LCD Interface Support for 9, 12, 18, 24, 36, 48-bit TFT and 16 or � Expansion Interface PC/104-Plus (ISA & PCI) 24-bit displays DSTN panels up to SXGA resolution � Battery Lithium 3 V/196 mAH � TV-out Supports both NTSC/PAL, S-video and Composite I/O Video � MIO 2 x EIDE (Ultra DMA33), 1 x FDD, 1 x K/B, 1 x Mouse, Mechanical and Environmental 1 x RS- 232/422/485, 3 x RS-232, 2 x LPT � Dimension (L x W) EBX form factor, 203 x 146 mm (8" x 5.75") � IrDA 115 Kbps, IrDA 1.1 compliant � Power supply Voltage +5 V ± 5% � Digital I/O ESS ES1989 supports AC’97 2.0 compliant, Mic-in, Max. : 4.5 A @ +5 V Line-in, CD Audio-in, Line-out, Speaker-out Typical: 3.8 A @ +5 V � USB 2 USB ports, USB 1.1 compliant ® (with 64 MB DRAM, Intel Pentium III-500) � Audio 8 TTL DIO or 6 TTL DIO & 2 Isolated DIO � Operating temperature 0 ~ 60° C (32~140° F) Ethernet � Operating Humidity 0% ~ 90% Relative Humidity, non condensing ® � Weight 0.57 kg (weight of total package) � Chipset RealTek RTL8139C, optional Intel 82559 (ER) � Interface IEEE 802.3u 100BASE-T Fast Ethernet compatible Built-in boot ROM in Flash BIOS Single Board Computers and Accessories 2-16 PCM-9572 1 System on Module Solutions Board Diagram 2 Single Board Computers and Accessories 3 PC/104 Modules 4 Slot CPU Cards and Accessories 5 AIMB/POS Control Boards 6 Internet Security Platforms 7 Embedded Software 8 Appx Packing List Ordering Information � 1 PCM-9572 SBC Standard � 1 Mini Jumper pack [count.: 10 pcs] (p/n: 9689000002) � PCM-9572F-L4A1 PIII-500MHZ CPU, Audio, 4MB VGA/LCD, Ethernet � Start up manual and SSD � Utility CD ® � PCM-9572F-J4A1 Celeron -400 CPU, Audio, 4MB VGA/LCD, Ethernet � EBX 7P-4P power cable (p/n: 1703080101) and SSD Optional � PCM-10586-5V00 Wiring kit for PCM-9572F � 1703100260 USB cable for PCM-9570/9572F/9574/9576F/9550F/ 9575 � 1703100121 USB cable for PCM-9570/9550/9576/9575 to meet MBPC-300 chassis � PCM-200-00A2 PC/104+ to PCI adapter � 1703070101 ATX power control cable Online Download www.advantech.com/products 2-17
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the PCM-200?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods